Thanks for your help Laine
In my case disabling dhcpd is not an option so I took the path of disabling dhcp on virbr0. Pxe is handled by xcat which uses dhcpd for this. It seems to be working fine :)
Regards
Em qua, 20 de jun de 2018 10:59, Laine Stump <laine@xxxxxxxxxx> escreveu:
On 06/18/2018 01:00 PM, Daniel. wrote:
> Thanks for the reply Laine. My problem is that dnsmasq is masking
> dhcpd, xCAT uses dhcpd for PXE stuff. If dnsmasq answer DHCP requests
> the PXE boot won' t work. I want to see the logs for ensuring the
> dnsmasq is not masking dhcpd.
The dnsmasq run by libvirtd only listens on bridges that libvirt itself
creates for libvirt virtual networks. If the PXE boot you're talking
about is happening on a different interface, then libvirt's dnsmasq will
not be messing with it.
If, on the other hand, you want to do PXE boot on the virtual networks
created by libvirt, then you can either 1) disable libvirt's dhcp on
that network by removing the <dhcp> section from the network definition
and restarting it, or 2) read in the libvirt virtual network
documentation on how to set it up to support PXE boot via dnsmasq (and
don't configure your dhcpd to listen on that interface).
>
> Regards,
>
> 2018-06-18 11:39 GMT-03:00 Laine Stump <laine@xxxxxxxxxx>:
>> On 06/18/2018 09:16 AM, Daniel. wrote:
>>> Cool, thanks!! Does it have logs?
>>
>> Whatever dnsmasq chooses to log, and wherever it chooses to log it. (I
>> actually looked once to see if there was a way of reducing the amount of
>> logging, and didn't find much of anything useful.)
>>
>> If you were planning to learn the current IP address of a particular
>> guest's interface by looking at the logs, you can instead use the virsh
>> domifaddr to to that.
>>
>>>
>>>
>>> Cheers
>>>
>>> Em 18/06/2018 12:55 AM, "Laine Stump" <laine@xxxxxxxxxx
>>> <mailto:laine@xxxxxxxxxx>> escreveu:
>>>
>>> On 06/15/2018 06:49 PM, Daniel. wrote:
>>> > Hi everybody,
>>> >
>>> > I'm using libvirt together with xCAT, on the same host, for testing
>>> > purposes. xCAT install and manages dhcpd. How libvirt interacts with
>>> > dhcpd? And if doens't how does the dhcp server of libvirt works, plus
>>> > where I can find information on how to troubleshot it?
>>>
>>> libvirt doesn't use dhcpd. It runs a separate instance of dnsmasq for
>>> each virtual network that is defined within libvirt. Each instance
>>> listens *only* on the bridge device that was created by libvirt for that
>>> network. IIfi dhcpd has an option that tells it to listen on all
>>> interfaces (or to automatically start listening on any new interface
>>> that is created), you should disable that option so that it doesn't
>>> attempt to listen for dhcp requests on the bridges created by libvirt.
>>>
>>>
>>
>
>
>
_______________________________________________ libvirt-users mailing list libvirt-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvirt-users
