18. Juli 2017 16:45, "Michal Privoznik" <mprivozn@xxxxxxxxxx> schrieb:
> On 07/18/2017 04:31 PM, c.monty@xxxxxx wrote:
>
>> Hello!
>>
>> I have upgraded all libvirt packages to version 3.5.0-655.1 and restarted host.
>
> That wasn't necessary. It's not Windows ;-)
>
>> This is the current default network config:
>> ld4004:~ # virsh net-dumpxml default
>> <network connections='1'>
>> <name>default</name>
>> <uuid>f511d113-d7d1-4714-ad2b-be29ef8f7fc4</uuid>
>> <forward dev='br0' mode='nat'>
>> <nat>
>> <port start='1024' end='65535'/>
>> </nat>
>> <interface dev='br0'/>
>> </forward>
>> <bridge name='virbr0' stp='on' delay='0'/>
>> <mac address='52:54:00:f5:5f:ca'/>
>> <domain name='local.net' localOnly='yes'/>
>> <ip address='192.168.100.1' netmask='255.255.255.0'>
>> <dhcp>
>> <range start='192.168.100.10' end='192.168.100.254'/>
>> </dhcp>
>> </ip>
>> </network>
>
> This is looking good.
>
>> What do I need to configure in order to have NSS working?
>
> What's the domain's <interface/> type? It should look something like this:
>
> <interface type='network'>
> <source network='default'/>
> ...
> </interface>
>
> And with this you should be all set.
>
> Michal
OK, all libvirt software packages are updated.
And this is the configuration /etc/nsswitch.conf
ld4004:~ # cat /etc/nsswitch.conf
#
# /etc/nsswitch.conf
#
passwd: compat
group: compat
hosts: files libvirt dns
networks: files dns
services: files
protocols: files
rpc: files
ethers: files
netmasks: files
netgroup: files nis
publickey: files
bootparams: files
automount: files nis
aliases: files
And this is the domain's interface type / configuration:
<interface type='network'>
<mac address='52:54:00:31:dd:59'/>
<source network='default'/>
<model type='rtl8139'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<interface type='network'>
<mac address='52:54:00:5d:1e:dc'/>
<source network='internal'/>
<model type='rtl8139'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
</interface>
However, there's still no record of the domain's IP address:
ld4004:~ # virsh domifaddr --source lease vm02-fai
Name MAC address Protocol Address
-------------------------------------------------------------------------------
Could this issue be related to the domain's NIC configuration, means model type='rtl8139' or the fact that 2 NICs are configured?
For your information, it fails also with model type='virtio'.
Regards
_______________________________________________
libvirt-users mailing list
libvirt-users@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvirt-users
