DV suggested that we document some libvirt setups using shared storage. I'm not a fan of NFS, so I wrote some blog posts on how to use iSCSI in the context of libvirt + KVM. There is of course more than one way todo things, so I've outlined a couple of different options. One completely manual command line approach using tgtadm on the iSCSI server: http://berrange.com/posts/2010/05/05/provisioning-kvm-virtual-machines-on-iscsi-the-hard-way-part-1-of-2/ ..and virsh/virt-install on the KVM host http://berrange.com/posts/2010/05/05/provisioning-kvm-virtual-machines-on-iscsi-the-hard-way-part-2-of-2/ Then one completely GUI based approach, using a QNAP NAS as the iSCSI server http://berrange.com/posts/2010/05/04/provisioning-kvm-virtual-machines-on-iscsi-with-qnap-virt-manager-part-1-of-2/ ..and a virt-manager on the KVM host: http://berrange.com/posts/2010/05/04/provisioning-kvm-virtual-machines-on-iscsi-with-qnap-virt-manager-part-2-of-2/ You can of course mix+match, doing the iSCSI server the manual way and the libvirt bits the GUI way and vica-verca. Any other commercial iSCSI server will have the same concepts so the libvirt instructions apply in all likely scenarios. Regards, Daniel -- |: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://deltacloud.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
