HI,
I have a small problem with libvirt / qemu. I have created a guest and when I start it from the command-line the guests starts OK, but when I start the guest through libvirt with "virsh start" I get "Booting from Hard Disk...
Boot failed: not a bootable disk
No bootable device"
This is the command-line I use to start the guest (which works)
"cd /var/lib/kvm/Wilmer; /usr/bin/qemu-system-x86_64 --enable-kvm \
-net nic,vlan=1,model=rtl8139,macaddr=DE:ED:BE:EF:01:03 -net tap,vlan=1,ifname=qtap13,script=no,downscript=no \
-net nic,vlan=3,model=rtl8139,macaddr=DE:ED:BE:EF:03:03 -net tap,vlan=3,ifname=qtap33,script=no,downscript=no \
-m 2048 -k de-ch -vnc :3 -daemonize \
Wilmer.qcow2"
The libvirt XML-file was created using "virsh domxml-from-native qemu-argv" and this is the result of that conversion:
<domain type='kvm'>
<name>wilmer</name>
<uuid>a421968d-0573-1356-8cb7-32caff525a03</uuid>
<memory>2097152</memory>
<currentMemory>2097152</currentMemory>
<vcpu>2</vcpu>
<os>
<type arch='x86_64' machine='pc-0.12'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<disk type='file' device='disk'>
<source file='/var/lib/kvm/Wilmer/Wilmer.qcow2'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' unit='0'/>
</disk>
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<interface type='ethernet'>
<mac address='de:ed:be:ef:01:03'/>
<script path='no'/>
<target dev='qtap13'/>
<model type='rtl8139'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</interface>
<interface type='ethernet'>
<mac address='de:ed:be:ef:03:03'/>
<script path='no'/>
<target dev='qtap33'/>
<model type='rtl8139'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</interface>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='5903' autoport='no' listen=''/>
<video>
<model type='cirrus' vram='9216' heads='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
</devices>
</domain>
Anyone seeing something obvious that I have missed?
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***************************************************
This message is printed on 100% recycled electrons!
***************************************************
