format command line of qemu to add pci-bridge
like this: -device pci-bridge.
and also add a qemu capability to check if
qemu support pci-bridge device
Signed-off-by: liguang <lig.fnst@xxxxxxxxxxxxxx>
---
src/qemu/qemu_capabilities.c | 4 ++-
src/qemu/qemu_capabilities.h | 1 +
src/qemu/qemu_command.c | 43 ++++++++++++++++++++++-------------------
3 files changed, 27 insertions(+), 21 deletions(-)
diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c
index 29693c3..d2e379b 100644
--- a/src/qemu/qemu_capabilities.c
+++ b/src/qemu/qemu_capabilities.c
@@ -202,7 +202,8 @@ VIR_ENUM_IMPL(qemuCaps, QEMU_CAPS_LAST,
"s390-sclp",
"usb-serial", /* 125 */
- "usb-net",
+ "usb-serial",
+ "pci-bridge"
);
@@ -1351,6 +1352,7 @@ struct qemuCapsStringFlags qemuCapsObjectTypes[] = {
{ "cirrus-vga", QEMU_CAPS_DEVICE_CIRRUS_VGA },
{ "vmware-svga", QEMU_CAPS_DEVICE_VMWARE_SVGA },
{ "usb-serial", QEMU_CAPS_DEVICE_USB_SERIAL},
+ { "pci-bridge", QEMU_CAPS_DEVICE_PCI_BRIDGE },
{ "usb-net", QEMU_CAPS_DEVICE_USB_NET},
};
diff --git a/src/qemu/qemu_capabilities.h b/src/qemu/qemu_capabilities.h
index 5279d07..c50bba8 100644
--- a/src/qemu/qemu_capabilities.h
+++ b/src/qemu/qemu_capabilities.h
@@ -165,6 +165,7 @@ enum qemuCapsFlags {
QEMU_CAPS_SCLP_S390 = 124, /* -device sclp* */
QEMU_CAPS_DEVICE_USB_SERIAL = 125, /* -device usb-serial */
QEMU_CAPS_DEVICE_USB_NET = 126, /* -device usb-net */
+ QEMU_CAPS_DEVICE_PCI_BRIDGE = 127, /* -device pci-bridge */
QEMU_CAPS_LAST, /* this must always be the last item */
};
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index f6273c1..9ad3c77 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -956,13 +956,6 @@ static char *qemuPCIAddressAsString(virDomainDeviceInfoPtr dev)
{
char *addr;
- if (dev->addr.pci.domain != 0 ||
- dev->addr.pci.bus != 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("Only PCI domain 0 and bus 0 are available"));
- return NULL;
- }
-
if (virAsprintf(&addr, "%d:%d:%d.%d",
dev->addr.pci.domain,
dev->addr.pci.bus,
@@ -974,7 +967,6 @@ static char *qemuPCIAddressAsString(virDomainDeviceInfoPtr dev)
return addr;
}
-
static int qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
virDomainDeviceDefPtr device,
virDomainDeviceInfoPtr info,
@@ -994,6 +986,13 @@ static int qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED,
return 0;
}
+ if (info->addr.pci.domain != 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+ _("Only PCI device addresses with "
+ "domain=0 are supported"));
+ return -1;
+ }
+
addr = qemuPCIAddressAsString(info);
if (!addr)
goto cleanup;
@@ -1753,16 +1752,6 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
qemuCapsPtr caps)
{
if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
- if (info->addr.pci.domain != 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("Only PCI device addresses with domain=0 are supported"));
- return -1;
- }
- if (info->addr.pci.bus != 0) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("Only PCI device addresses with bus=0 are supported"));
- return -1;
- }
if (qemuCapsGet(caps, QEMU_CAPS_PCI_MULTIFUNCTION)) {
if (info->addr.pci.function > 7) {
virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
@@ -1777,6 +1766,7 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
"are supported with this QEMU binary"));
return -1;
}
+
if (info->addr.pci.multi == VIR_DEVICE_ADDRESS_PCI_MULTI_ON) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("'multifunction=on' is not supported with "
@@ -1787,11 +1777,13 @@ qemuBuildDeviceAddressStr(virBufferPtr buf,
/* XXX
* When QEMU grows support for > 1 PCI bus, then pci.0 changes
- * to pci.1, pci.2, etc
+ * to pci.1, pci.2, etc, (e.g. when support pci-to-pci bridge)
* When QEMU grows support for > 1 PCI domain, then pci.0 change
* to pciNN.0 where NN is the domain number
*/
- if (qemuCapsGet(caps, QEMU_CAPS_PCI_MULTIBUS))
+ if (qemuCapsGet(caps, QEMU_CAPS_DEVICE_PCI_BRIDGE))
+ virBufferAsprintf(buf, ",bus=pci.%d", info->addr.pci.bus);
+ else if (qemuCapsGet(caps, QEMU_CAPS_PCI_MULTIBUS))
virBufferAsprintf(buf, ",bus=pci.0");
else
virBufferAsprintf(buf, ",bus=pci");
@@ -3072,6 +3064,15 @@ qemuBuildControllerDevStr(virDomainDefPtr domainDef,
int model;
switch (def->type) {
+ case VIR_DOMAIN_CONTROLLER_TYPE_PCI_BRIDGE:
+ if (def->idx == 0) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("pci-bridge no. shouldn't be 0 at here."));
+ goto out;
+ }
+ virBufferAsprintf(&buf, "pci-bridge,chassis_nr=%d", def->idx + 1);
+ virBufferAsprintf(&buf, ",id=pci.%d", def->idx);
+ break;
case VIR_DOMAIN_CONTROLLER_TYPE_SCSI:
model = def->model;
if ((qemuSetScsiControllerModel(domainDef, caps, &model)) < 0)
@@ -3145,6 +3146,7 @@ qemuBuildControllerDevStr(virDomainDefPtr domainDef,
if (qemuBuildDeviceAddressStr(&buf, &def->info, caps) < 0)
goto error;
+out:
if (virBufferError(&buf)) {
virReportOOMError();
goto error;
@@ -5080,6 +5082,7 @@ qemuBuildCommandLine(virConnectPtr conn,
/* We don't add an explicit IDE or FD controller because the
* provided PIIX4 device already includes one. It isn't possible to
* remove the PIIX4. */
+ VIR_DOMAIN_CONTROLLER_TYPE_PCI_BRIDGE,
VIR_DOMAIN_CONTROLLER_TYPE_USB,
VIR_DOMAIN_CONTROLLER_TYPE_SCSI,
VIR_DOMAIN_CONTROLLER_TYPE_SATA,
--
1.7.2.5
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list