Both generated with
qemu-system-x86_64 --help > qemu-1.2.0
qemu-system-x86_64 \
-device ? \
-device pci-assign,? \
-device virtio-blk-pci,? \
-device virtio-net-pci,? \
-device scsi-disk,? \
-device PIIX4_PM,? \
-device usb-redir,? \
-device ide-drive,? \
-device usb-host,? 2> qemu-1.2.0-device
It seems I missed a few -device flags when doing this last time and I
mixed up qemu and qemu-kvm.
---
tests/qemuhelpdata/qemu-1.2.0 | 1 +
tests/qemuhelpdata/qemu-1.2.0-device | 51 +++++--
tests/qemuhelpdata/qemu-kvm-1.2.0 | 276 ++++++++++++++++++++++++++++++
tests/qemuhelpdata/qemu-kvm-1.2.0-device | 222 ++++++++++++++++++++++++
tests/qemuhelptest.c | 106 +++++++++++-
5 files changed, 644 insertions(+), 12 deletions(-)
create mode 100644 tests/qemuhelpdata/qemu-kvm-1.2.0
create mode 100644 tests/qemuhelpdata/qemu-kvm-1.2.0-device
diff --git a/tests/qemuhelpdata/qemu-1.2.0 b/tests/qemuhelpdata/qemu-1.2.0
index f52fdcb..78375f3 100644
--- a/tests/qemuhelpdata/qemu-1.2.0
+++ b/tests/qemuhelpdata/qemu-1.2.0
@@ -175,6 +175,7 @@ Character device options:
-chardev stdio,id=id[,mux=on|off][,signal=on|off]
-chardev tty,id=id,path=path[,mux=on|off]
-chardev parport,id=id,path=path[,mux=on|off]
+-chardev spicevmc,id=id,name=name[,debug=debug]
-iscsi [user=user][,password=password]
[,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE
diff --git a/tests/qemuhelpdata/qemu-1.2.0-device b/tests/qemuhelpdata/qemu-1.2.0-device
index 9230a93..5613e00 100644
--- a/tests/qemuhelpdata/qemu-1.2.0-device
+++ b/tests/qemuhelpdata/qemu-1.2.0-device
@@ -8,6 +8,7 @@ name "esp", bus System
name "sysbus-ohci", bus System, desc "OHCI USB Controller"
name "virtio-blk-pci", bus PCI, alias "virtio-blk"
name "usb-uas", bus usb-bus
+name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)"
name "ide-drive", bus IDE, desc "virtual IDE disk or CD-ROM (legacy)"
name "x3130-upstream", bus PCI, desc "TI X3130 Upstream Port of PCI Express Switch"
name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
@@ -32,6 +33,7 @@ name "pci-ohci", bus PCI, desc "Apple USB Controller"
name "nec-usb-xhci", bus PCI
name "xio3130-downstream", bus PCI, desc "TI X3130 Downstream Port of PCI Express Switch"
name "virtserialport", bus virtio-serial-bus
+name "usb-redir", bus usb-bus
name "usb-braille", bus usb-bus
name "scsi-cd", bus SCSI, desc "virtual SCSI CD-ROM"
name "usb-wacom-tablet", bus usb-bus, desc "QEMU PenPartner Tablet"
@@ -64,9 +66,9 @@ name "usb-bt-dongle", bus usb-bus
name "usb-tablet", bus usb-bus
name "isa-vga", bus ISA
name "usb-kbd", bus usb-bus
-name "kvm-pci-assign", bus PCI, alias "pci-assign", desc "KVM-based PCI passthrough"
name "isa-applesmc", bus ISA
name "rtl8139", bus PCI
+name "qxl", bus PCI, desc "Spice QXL GPU (secondary)"
name "i82557a", bus PCI, desc "Intel i82557A Ethernet"
name "i82557c", bus PCI, desc "Intel i82557C Ethernet"
name "usb-audio", bus usb-bus
@@ -95,16 +97,6 @@ name "vt82c686b-usb-uhci", bus PCI
name "usb-ehci", bus PCI
name "i6300esb", bus PCI
name "virtio-scsi-pci", bus PCI
-kvm-pci-assign.host=pci-host-devaddr
-kvm-pci-assign.prefer_msi=on/off
-kvm-pci-assign.share_intx=on/off
-kvm-pci-assign.bootindex=int32
-kvm-pci-assign.configfd=string
-kvm-pci-assign.addr=pci-devfn
-kvm-pci-assign.romfile=string
-kvm-pci-assign.rombar=uint32
-kvm-pci-assign.multifunction=on/off
-kvm-pci-assign.command_serr_enable=on/off
virtio-blk-pci.class=hex32
virtio-blk-pci.drive=drive
virtio-blk-pci.logical_block_size=blocksize
@@ -179,3 +171,40 @@ scsi-disk.wwn=hex64
scsi-disk.channel=uint32
scsi-disk.scsi-id=uint32
scsi-disk.lun=uint32
+PIIX4_PM.smb_io_base=uint32
+PIIX4_PM.disable_s3=uint8
+PIIX4_PM.disable_s4=uint8
+PIIX4_PM.s4_val=uint8
+PIIX4_PM.addr=pci-devfn
+PIIX4_PM.romfile=string
+PIIX4_PM.rombar=uint32
+PIIX4_PM.multifunction=on/off
+PIIX4_PM.command_serr_enable=on/off
+usb-redir.chardev=chr
+usb-redir.debug=uint8
+usb-redir.filter=string
+usb-redir.bootindex=int32
+usb-redir.port=string
+usb-redir.full-path=on/off
+ide-drive.drive=drive
+ide-drive.logical_block_size=blocksize
+ide-drive.physical_block_size=blocksize
+ide-drive.min_io_size=uint16
+ide-drive.opt_io_size=uint32
+ide-drive.bootindex=int32
+ide-drive.discard_granularity=uint32
+ide-drive.ver=string
+ide-drive.wwn=hex64
+ide-drive.serial=string
+ide-drive.model=string
+ide-drive.unit=uint32
+usb-host.hostbus=uint32
+usb-host.hostaddr=uint32
+usb-host.hostport=string
+usb-host.vendorid=hex32
+usb-host.productid=hex32
+usb-host.isobufs=uint32
+usb-host.bootindex=int32
+usb-host.pipeline=on/off
+usb-host.port=string
+usb-host.full-path=on/off
diff --git a/tests/qemuhelpdata/qemu-kvm-1.2.0 b/tests/qemuhelpdata/qemu-kvm-1.2.0
new file mode 100644
index 0000000..372002a
--- /dev/null
+++ b/tests/qemuhelpdata/qemu-kvm-1.2.0
@@ -0,0 +1,276 @@
+QEMU emulator version 1.2.0 (qemu-kvm-devel), Copyright (c) 2003-2008 Fabrice Bellard
+usage: qemu-system-x86_64 [options] [disk_image]
+
+'disk_image' is a raw hard disk image for IDE hard disk 0
+
+Standard options:
+-h or -help display this help and exit
+-version display version information and exit
+-machine [type=]name[,prop[=value][,...]]
+ selects emulated machine (-machine ? for list)
+ property accel=accel1[:accel2[:...]] selects accelerator
+ supported accelerators are kvm, xen, tcg (default: tcg)
+ kernel_irqchip=on|off controls accelerated irqchip support
+ kvm_shadow_mem=size of KVM shadow MMU
+ dump-guest-core=on|off include guest memory in a core dump (default=on)
+-cpu cpu select CPU (-cpu ? for list)
+-smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
+ set the number of CPUs to 'n' [default=1]
+ maxcpus= maximum number of total cpus, including
+ offline CPUs for hotplug, etc
+ cores= number of CPU cores on one socket
+ threads= number of threads on one CPU core
+ sockets= number of discrete sockets in the system
+-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
+-fda/-fdb file use 'file' as floppy disk 0/1 image
+-hda/-hdb file use 'file' as IDE hard disk 0/1 image
+-hdc/-hdd file use 'file' as IDE hard disk 2/3 image
+-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
+-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
+ [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
+ [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]
+ [,serial=s][,addr=A][,id=name][,aio=threads|native]
+ [,readonly=on|off][,copy-on-read=on|off]
+ [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]
+ use 'file' as a drive image
+-set group.id.arg=value
+ set <arg> parameter for item <id> of type <group>
+ i.e. -set drive.$id.file=/path/to/image
+-global driver.prop=value
+ set a global default for a driver property
+-mtdblock file use 'file' as on-board Flash memory image
+-sd file use 'file' as SecureDigital card image
+-pflash file use 'file' as a parallel flash image
+-boot [order=drives][,once=drives][,menu=on|off]
+ [,splash=sp_name][,splash-time=sp_time]
+ 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
+ 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on
+ 'sp_time': the period that splash picture last if menu=on, unit is ms
+-snapshot write to temporary files instead of disk image files
+-m megs set virtual RAM size to megs MB [default=128]
+-mem-path FILE provide backing storage for guest RAM
+-mem-prealloc preallocate guest memory (use with -mem-path)
+-k language use keyboard layout (for example 'fr' for French)
+-audio-help print list of audio drivers and their options
+-soundhw c1,... enable audio support
+ and only specified sound cards (comma separated list)
+ use -soundhw ? to get the list of supported cards
+ use -soundhw all to enable all of them
+-balloon none disable balloon device
+-balloon virtio[,addr=str]
+ enable virtio balloon device (default)
+-usb enable the USB driver (will be the default soon)
+-usbdevice name add the host or guest USB device 'name'
+-device driver[,prop[=value][,...]]
+ add device (based on driver)
+ prop=value,... sets driver properties
+ use -device ? to print all possible drivers
+ use -device driver,? to print all possible properties
+
+File system options:
+-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]
+ [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
+
+Virtual File system pass-through options:
+-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]
+ [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
+-virtfs_synth Create synthetic file system image
+
+-name string1[,process=string2]
+ set the name of the guest
+ string1 sets the window title and string2 the process name (on Linux)
+-uuid %08x-%04x-%04x-%04x-%012x
+ specify machine UUID
+
+Display options:
+-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]
+ [,window_close=on|off]|curses|none|
+ vnc=<display>[,<optargs>]
+ select display type
+-nographic disable graphical output and redirect serial I/Os to console
+-curses use a curses/ncurses interface instead of SDL
+-no-frame open SDL window without a frame and window decorations
+-alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
+-ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
+-no-quit disable SDL window close capability
+-sdl enable SDL
+-spice <args> enable spice
+-portrait rotate graphical output 90 deg left (only PXA LCD)
+-rotate <deg> rotate graphical output some deg left (only PXA LCD)
+-vga [std|cirrus|vmware|qxl|xenfb|none]
+ select video card type
+-full-screen start in full screen
+-vnc display start a VNC server on display
+
+i386 target only:
+-win2k-hack use it when installing Windows 2000 to avoid a disk full bug
+-no-fd-bootchk disable boot signature checking for floppy disks
+-no-acpi disable ACPI
+-no-hpet disable HPET
+-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]
+ ACPI table description
+-smbios file=binary
+ load SMBIOS entry from binary file
+-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
+ specify SMBIOS type 0 fields
+-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
+ [,uuid=uuid][,sku=str][,family=str]
+ specify SMBIOS type 1 fields
+
+Network options:
+-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
+ create a new Network Interface Card and connect it to VLAN 'n'
+-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]
+ [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
+ [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
+ connect the user mode network stack to VLAN 'n', configure its
+ DHCP server and enabled optional services
+-net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]
+ connect the host TAP network interface to VLAN 'n'
+ use network scripts 'file' (default=/etc/qemu-ifup)
+ to configure it and 'dfile' (default=/etc/qemu-ifdown)
+ to deconfigure it
+ use '[down]script=no' to disable script execution
+ use network helper 'helper' (default=/usr/local/libexec/qemu-bridge-helper) to
+ configure it
+ use 'fd=h' to connect to an already opened TAP interface
+ use 'sndbuf=nbytes' to limit the size of the send buffer (the
+ default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')
+ use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag
+ use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
+ use vhost=on to enable experimental in kernel accelerator
+ (only has effect for virtio guests which use MSIX)
+ use vhostforce=on to force vhost on for non-MSIX virtio guests
+ use 'vhostfd=h' to connect to an already opened vhost net device
+-net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]
+ connects a host TAP network interface to a host bridge device 'br'
+ (default=br0) using the program 'helper'
+ (default=/usr/local/libexec/qemu-bridge-helper)
+-net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
+ connect the vlan 'n' to another VLAN using a socket connection
+-net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]]
+ connect the vlan 'n' to multicast maddr and port
+ use 'localaddr=addr' to specify the host address to send packets from
+-net socket[,vlan=n][,name=str][,fd=h][,udp=host:port][,localaddr=host:port]
+ connect the vlan 'n' to another VLAN using an UDP tunnel
+-net dump[,vlan=n][,file=f][,len=n]
+ dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
+-net none use it alone to have zero network devices. If no -net option
+ is provided, the default is '-net nic -net user'
+-netdev [user|tap|bridge|socket],id=str[,option][,option][,...]
+
+Character device options:
+-chardev null,id=id[,mux=on|off]
+-chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
+ [,server][,nowait][,telnet][,mux=on|off] (tcp)
+-chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)
+-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
+ [,localport=localport][,ipv4][,ipv6][,mux=on|off]
+-chardev msmouse,id=id[,mux=on|off]
+-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
+ [,mux=on|off]
+-chardev file,id=id,path=path[,mux=on|off]
+-chardev pipe,id=id,path=path[,mux=on|off]
+-chardev pty,id=id[,mux=on|off]
+-chardev stdio,id=id[,mux=on|off][,signal=on|off]
+-chardev tty,id=id,path=path[,mux=on|off]
+-chardev parport,id=id,path=path[,mux=on|off]
+-chardev spicevmc,id=id,name=name[,debug=debug]
+
+-iscsi [user=user][,password=password]
+ [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE
+ [,initiator-name=iqn]
+ iSCSI session parameters
+Bluetooth(R) options:
+-bt hci,null dumb bluetooth HCI - doesn't respond to commands
+-bt hci,host[:id]
+ use host's HCI with the given name
+-bt hci[,vlan=n]
+ emulate a standard HCI in virtual scatternet 'n'
+-bt vhci[,vlan=n]
+ add host computer to virtual scatternet 'n' using VHCI
+-bt device:dev[,vlan=n]
+ emulate a bluetooth device 'dev' in scatternet 'n'
+
+Linux/Multiboot boot specific:
+-kernel bzImage use 'bzImage' as kernel image
+-append cmdline use 'cmdline' as kernel command line
+-initrd file use 'file' as initial ram disk
+-dtb file use 'file' as device tree image
+
+Debug/Expert options:
+-serial dev redirect the serial port to char device 'dev'
+-parallel dev redirect the parallel port to char device 'dev'
+-monitor dev redirect the monitor to char device 'dev'
+-qmp dev like -monitor but opens in 'control' mode
+-mon chardev=[name][,mode=readline|control][,default]
+-debugcon dev redirect the debug console to char device 'dev'
+-pidfile file write PID to 'file'
+-singlestep always run in singlestep mode
+-S freeze CPU at startup (use 'c' to start execution)
+-gdb dev wait for gdb connection on 'dev'
+-s shorthand for -gdb tcp::1234
+-d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
+-D logfile output log to logfile (instead of the default /tmp/qemu.log)
+-hdachs c,h,s[,t]
+ force hard disk 0 physical geometry and the optional BIOS
+ translation (t=none or lba) (usually QEMU can guess them)
+-L path set the directory for the BIOS, VGA BIOS and keymaps
+-bios file set the filename for the BIOS
+-enable-kvm enable KVM full virtualization support
+-xen-domid id specify xen guest domain id
+-xen-create create domain using xen hypercalls, bypassing xend
+ warning: should not be used when xend is in use
+-xen-attach attach to existing xen domain
+ xend will use this when starting QEMU
+-no-reboot exit instead of rebooting
+-no-shutdown stop before shutdown
+-loadvm [tag|id]
+ start right away with a saved state (loadvm in monitor)
+-daemonize daemonize QEMU after initializing
+-option-rom rom load a file, rom, into the option ROM space
+-clock force the use of the given methods for timer alarm.
+ To see what timers are available use -clock ?
+-rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]
+ set the RTC base and clock, enable drift fix for clock ticks (x86 only)
+-icount [N|auto]
+ enable virtual instruction counter with 2^N clock ticks per
+ instruction
+-watchdog i6300esb|ib700
+ enable virtual hardware watchdog [default=none]
+-watchdog-action reset|shutdown|poweroff|pause|debug|none
+ action when watchdog fires [default=reset]
+-echr chr set terminal escape character instead of ctrl-a
+-virtioconsole c
+ set virtio console
+-show-cursor show cursor
+-tb-size n set TB size
+-incoming p prepare for incoming migration, listen on port p
+-nodefaults don't create default devices
+-chroot dir chroot to dir just before starting the VM
+-runas user change to user id user just before starting the VM
+-sandbox <arg> Enable seccomp mode 2 system call filter (default 'off').
+-readconfig <file>
+-writeconfig <file>
+ read/write config file
+-nodefconfig
+ do not load default config files at startup
+-no-user-config
+ do not load user-provided config files at startup
+-trace [events=<file>][,file=<file>]
+ specify tracing options
+-qtest CHR specify tracing options
+-qtest-log LOG specify tracing options
+-enable-fips enable FIPS 140-2 compliance
+-no-kvm disable KVM hardware virtualization
+-no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
+-no-kvm-pit disable KVM kernel mode PIT
+-no-kvm-pit-reinjection
+ disable KVM kernel mode PIT interrupt reinjection
+
+During emulation, the following keys are useful:
+ctrl-alt-f toggle full screen
+ctrl-alt-n switch to virtual console 'n'
+ctrl-alt toggle mouse and keyboard grab
+
+When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-kvm-1.2.0-device b/tests/qemuhelpdata/qemu-kvm-1.2.0-device
new file mode 100644
index 0000000..879a049
--- /dev/null
+++ b/tests/qemuhelpdata/qemu-kvm-1.2.0-device
@@ -0,0 +1,222 @@
+name "VGA", bus PCI
+name "usb-storage", bus usb-bus
+name "scsi-hd", bus SCSI, desc "virtual SCSI disk"
+name "i82559a", bus PCI, desc "Intel i82559A Ethernet"
+name "i82559b", bus PCI, desc "Intel i82559B Ethernet"
+name "i82559c", bus PCI, desc "Intel i82559C Ethernet"
+name "esp", bus System
+name "sysbus-ohci", bus System, desc "OHCI USB Controller"
+name "virtio-blk-pci", bus PCI, alias "virtio-blk"
+name "usb-uas", bus usb-bus
+name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)"
+name "ide-drive", bus IDE, desc "virtual IDE disk or CD-ROM (legacy)"
+name "x3130-upstream", bus PCI, desc "TI X3130 Upstream Port of PCI Express Switch"
+name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
+name "ide-hd", bus IDE, desc "virtual IDE disk"
+name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
+name "ioh3420", bus PCI, desc "Intel IOH device id 3420 PCIE Root Port"
+name "sga", bus ISA, desc "Serial Graphics Adapter"
+name "scsi-block", bus SCSI, desc "SCSI block device passthrough"
+name "usb-serial", bus usb-bus
+name "pc-sysfw", bus System, desc "PC System Firmware"
+name "usb-mouse", bus usb-bus
+name "usb-net", bus usb-bus
+name "usb-hub", bus usb-bus
+name "ccid-card-emulated", bus ccid-bus, desc "emulated smartcard"
+name "ne2k_isa", bus ISA
+name "pci-assign", bus PCI
+name "scsi-generic", bus SCSI, desc "pass through generic scsi device (/dev/sg*)"
+name "pcnet", bus PCI
+name "lsi53c895a", bus PCI, alias "lsi"
+name "scsi-disk", bus SCSI, desc "virtual SCSI disk or CD-ROM (legacy)"
+name "hda-micro", bus HDA, desc "HDA Audio Codec, duplex (speaker, microphone)"
+name "pci-ohci", bus PCI, desc "Apple USB Controller"
+name "nec-usb-xhci", bus PCI
+name "xio3130-downstream", bus PCI, desc "TI X3130 Downstream Port of PCI Express Switch"
+name "virtserialport", bus virtio-serial-bus
+name "usb-redir", bus usb-bus
+name "usb-braille", bus usb-bus
+name "scsi-cd", bus SCSI, desc "virtual SCSI CD-ROM"
+name "usb-wacom-tablet", bus usb-bus, desc "QEMU PenPartner Tablet"
+name "isa-serial", bus ISA
+name "i82550", bus PCI, desc "Intel i82550 Ethernet"
+name "i82551", bus PCI, desc "Intel i82551 Ethernet"
+name "isa-debugcon", bus ISA
+name "ide-cd", bus IDE, desc "virtual IDE CD-ROM"
+name "SUNW,fdtwo", bus System
+name "ich9-usb-uhci2", bus PCI
+name "ich9-usb-uhci3", bus PCI
+name "ich9-usb-uhci1", bus PCI
+name "isa-parallel", bus ISA
+name "virtconsole", bus virtio-serial-bus
+name "ne2k_pci", bus PCI
+name "virtio-serial-pci", bus PCI, alias "virtio-serial"
+name "hda-duplex", bus HDA, desc "HDA Audio Codec, duplex (line-out, line-in)"
+name "intel-hda", bus PCI, desc "Intel HD Audio Controller"
+name "megasas", bus PCI, desc "LSI MegaRAID SAS 1078"
+name "i82559er", bus PCI, desc "Intel i82559ER Ethernet"
+name "hda-output", bus HDA, desc "HDA Audio Codec, output-only (line-out)"
+name "i82562", bus PCI, desc "Intel i82562 Ethernet"
+name "sysbus-ahci", bus System
+name "usb-ccid", bus usb-bus, desc "CCID Rev 1.1 smartcard reader"
+name "ivshmem", bus PCI
+name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
+name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
+name "sysbus-fdc", bus System
+name "usb-bt-dongle", bus usb-bus
+name "usb-tablet", bus usb-bus
+name "isa-vga", bus ISA
+name "usb-kbd", bus usb-bus
+name "isa-applesmc", bus ISA
+name "rtl8139", bus PCI
+name "qxl", bus PCI, desc "Spice QXL GPU (secondary)"
+name "i82557a", bus PCI, desc "Intel i82557A Ethernet"
+name "i82557c", bus PCI, desc "Intel i82557C Ethernet"
+name "usb-audio", bus usb-bus
+name "ib700", bus ISA
+name "piix3-usb-uhci", bus PCI
+name "i82557b", bus PCI, desc "Intel i82557B Ethernet"
+name "piix4-usb-uhci", bus PCI
+name "ccid-card-passthru", bus ccid-bus, desc "passthrough smartcard"
+name "i82801", bus PCI, desc "Intel i82801 Ethernet"
+name "smbus-eeprom", bus i2c-bus
+name "vmware-svga", bus PCI
+name "dc390", bus PCI, desc "Tekram DC-390 SCSI adapter"
+name "isa-cirrus-vga", bus ISA
+name "sb16", bus ISA, desc "Creative Sound Blaster 16"
+name "am53c974", bus PCI, desc "AMD Am53c974 PCscsi-PCI SCSI adapter"
+name "pci-bridge", bus PCI, desc "Standard PCI Bridge"
+name "i82558a", bus PCI, desc "Intel i82558A Ethernet"
+name "i82558b", bus PCI, desc "Intel i82558B Ethernet"
+name "virtio-net-pci", bus PCI, alias "virtio-net"
+name "virtio-balloon-pci", bus PCI, alias "virtio-balloon"
+name "ich9-usb-ehci1", bus PCI
+name "isa-ide", bus ISA
+name "usb-host", bus usb-bus
+name "ich9-ahci", bus PCI, alias "ahci"
+name "vt82c686b-usb-uhci", bus PCI
+name "usb-ehci", bus PCI
+name "testdev", bus ISA
+name "i6300esb", bus PCI
+name "virtio-scsi-pci", bus PCI
+pci-assign.host=pci-host-devaddr
+pci-assign.prefer_msi=on/off
+pci-assign.share_intx=on/off
+pci-assign.bootindex=int32
+pci-assign.configfd=string
+pci-assign.addr=pci-devfn
+pci-assign.romfile=string
+pci-assign.rombar=uint32
+pci-assign.multifunction=on/off
+pci-assign.command_serr_enable=on/off
+virtio-blk-pci.class=hex32
+virtio-blk-pci.drive=drive
+virtio-blk-pci.logical_block_size=blocksize
+virtio-blk-pci.physical_block_size=blocksize
+virtio-blk-pci.min_io_size=uint16
+virtio-blk-pci.opt_io_size=uint32
+virtio-blk-pci.bootindex=int32
+virtio-blk-pci.discard_granularity=uint32
+virtio-blk-pci.cyls=uint32
+virtio-blk-pci.heads=uint32
+virtio-blk-pci.secs=uint32
+virtio-blk-pci.serial=string
+virtio-blk-pci.scsi=on/off
+virtio-blk-pci.config-wce=on/off
+virtio-blk-pci.ioeventfd=on/off
+virtio-blk-pci.vectors=uint32
+virtio-blk-pci.indirect_desc=on/off
+virtio-blk-pci.event_idx=on/off
+virtio-blk-pci.config-wce=on/off
+virtio-blk-pci.addr=pci-devfn
+virtio-blk-pci.romfile=string
+virtio-blk-pci.rombar=uint32
+virtio-blk-pci.multifunction=on/off
+virtio-blk-pci.command_serr_enable=on/off
+virtio-net-pci.ioeventfd=on/off
+virtio-net-pci.vectors=uint32
+virtio-net-pci.indirect_desc=on/off
+virtio-net-pci.event_idx=on/off
+virtio-net-pci.csum=on/off
+virtio-net-pci.guest_csum=on/off
+virtio-net-pci.gso=on/off
+virtio-net-pci.guest_tso4=on/off
+virtio-net-pci.guest_tso6=on/off
+virtio-net-pci.guest_ecn=on/off
+virtio-net-pci.guest_ufo=on/off
+virtio-net-pci.host_tso4=on/off
+virtio-net-pci.host_tso6=on/off
+virtio-net-pci.host_ecn=on/off
+virtio-net-pci.host_ufo=on/off
+virtio-net-pci.mrg_rxbuf=on/off
+virtio-net-pci.status=on/off
+virtio-net-pci.ctrl_vq=on/off
+virtio-net-pci.ctrl_rx=on/off
+virtio-net-pci.ctrl_vlan=on/off
+virtio-net-pci.ctrl_rx_extra=on/off
+virtio-net-pci.mac=macaddr
+virtio-net-pci.vlan=vlan
+virtio-net-pci.netdev=netdev
+virtio-net-pci.bootindex=int32
+virtio-net-pci.x-txtimer=uint32
+virtio-net-pci.x-txburst=int32
+virtio-net-pci.tx=string
+virtio-net-pci.addr=pci-devfn
+virtio-net-pci.romfile=string
+virtio-net-pci.rombar=uint32
+virtio-net-pci.multifunction=on/off
+virtio-net-pci.command_serr_enable=on/off
+scsi-disk.drive=drive
+scsi-disk.logical_block_size=blocksize
+scsi-disk.physical_block_size=blocksize
+scsi-disk.min_io_size=uint16
+scsi-disk.opt_io_size=uint32
+scsi-disk.bootindex=int32
+scsi-disk.discard_granularity=uint32
+scsi-disk.ver=string
+scsi-disk.serial=string
+scsi-disk.vendor=string
+scsi-disk.product=string
+scsi-disk.removable=on/off
+scsi-disk.dpofua=on/off
+scsi-disk.wwn=hex64
+scsi-disk.channel=uint32
+scsi-disk.scsi-id=uint32
+scsi-disk.lun=uint32
+PIIX4_PM.smb_io_base=uint32
+PIIX4_PM.disable_s3=uint8
+PIIX4_PM.disable_s4=uint8
+PIIX4_PM.s4_val=uint8
+PIIX4_PM.addr=pci-devfn
+PIIX4_PM.romfile=string
+PIIX4_PM.rombar=uint32
+PIIX4_PM.multifunction=on/off
+PIIX4_PM.command_serr_enable=on/off
+usb-redir.chardev=chr
+usb-redir.debug=uint8
+usb-redir.filter=string
+usb-redir.bootindex=int32
+usb-redir.port=string
+usb-redir.full-path=on/off
+ide-drive.drive=drive
+ide-drive.logical_block_size=blocksize
+ide-drive.physical_block_size=blocksize
+ide-drive.min_io_size=uint16
+ide-drive.opt_io_size=uint32
+ide-drive.bootindex=int32
+ide-drive.discard_granularity=uint32
+ide-drive.ver=string
+ide-drive.wwn=hex64
+ide-drive.serial=string
+ide-drive.model=string
+ide-drive.unit=uint32
+usb-host.hostbus=uint32
+usb-host.hostaddr=uint32
+usb-host.hostport=string
+usb-host.vendorid=hex32
+usb-host.productid=hex32
+usb-host.isobufs=uint32
+usb-host.bootindex=int32
+usb-host.pipeline=on/off
+usb-host.port=string
+usb-host.full-path=on/off
diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c
index b49c86d..021b3dc 100644
--- a/tests/qemuhelptest.c
+++ b/tests/qemuhelptest.c
@@ -809,6 +809,101 @@ mymain(void)
QEMU_CAPS_RTC,
QEMU_CAPS_VHOST_NET,
QEMU_CAPS_NO_HPET,
+ QEMU_CAPS_NODEFCONFIG,
+ QEMU_CAPS_BOOT_MENU,
+ QEMU_CAPS_FSDEV,
+ QEMU_CAPS_NAME_PROCESS,
+ QEMU_CAPS_SMBIOS_TYPE,
+ QEMU_CAPS_VGA_QXL,
+ QEMU_CAPS_SPICE,
+ QEMU_CAPS_VGA_NONE,
+ QEMU_CAPS_MIGRATE_QEMU_FD,
+ QEMU_CAPS_BOOTINDEX,
+ QEMU_CAPS_HDA_DUPLEX,
+ QEMU_CAPS_DRIVE_AIO,
+ QEMU_CAPS_CCID_EMULATED,
+ QEMU_CAPS_CCID_PASSTHRU,
+ QEMU_CAPS_CHARDEV_SPICEVMC,
+ QEMU_CAPS_VIRTIO_TX_ALG,
+ QEMU_CAPS_DEVICE_QXL_VGA,
+ QEMU_CAPS_PCI_MULTIFUNCTION,
+ QEMU_CAPS_VIRTIO_IOEVENTFD,
+ QEMU_CAPS_SGA,
+ QEMU_CAPS_VIRTIO_BLK_EVENT_IDX,
+ QEMU_CAPS_VIRTIO_NET_EVENT_IDX,
+ QEMU_CAPS_DRIVE_CACHE_DIRECTSYNC,
+ QEMU_CAPS_PIIX3_USB_UHCI,
+ QEMU_CAPS_PIIX4_USB_UHCI,
+ QEMU_CAPS_USB_EHCI,
+ QEMU_CAPS_ICH9_USB_EHCI1,
+ QEMU_CAPS_VT82C686B_USB_UHCI,
+ QEMU_CAPS_PCI_OHCI,
+ QEMU_CAPS_USB_REDIR,
+ QEMU_CAPS_USB_HUB,
+ QEMU_CAPS_NO_SHUTDOWN,
+ QEMU_CAPS_PCI_ROMBAR,
+ QEMU_CAPS_ICH9_AHCI,
+ QEMU_CAPS_NO_ACPI,
+ QEMU_CAPS_FSDEV_READONLY,
+ QEMU_CAPS_VIRTIO_BLK_SCSI,
+ QEMU_CAPS_VIRTIO_BLK_SG_IO,
+ QEMU_CAPS_DRIVE_COPY_ON_READ,
+ QEMU_CAPS_CPU_HOST,
+ QEMU_CAPS_FSDEV_WRITEOUT,
+ QEMU_CAPS_DRIVE_IOTUNE,
+ QEMU_CAPS_SCSI_DISK_CHANNEL,
+ QEMU_CAPS_SCSI_BLOCK,
+ QEMU_CAPS_SCSI_CD,
+ QEMU_CAPS_IDE_CD,
+ QEMU_CAPS_NO_USER_CONFIG,
+ QEMU_CAPS_HDA_MICRO,
+ QEMU_CAPS_NEC_USB_XHCI,
+ QEMU_CAPS_NETDEV_BRIDGE,
+ QEMU_CAPS_SCSI_LSI,
+ QEMU_CAPS_VIRTIO_SCSI_PCI,
+ QEMU_CAPS_BLOCKIO,
+ QEMU_CAPS_DISABLE_S3,
+ QEMU_CAPS_DISABLE_S4,
+ QEMU_CAPS_USB_REDIR_FILTER,
+ QEMU_CAPS_IDE_DRIVE_WWN,
+ QEMU_CAPS_SCSI_DISK_WWN,
+ QEMU_CAPS_SECCOMP_SANDBOX,
+ QEMU_CAPS_DUMP_GUEST_CORE,
+ QEMU_CAPS_VNC,
+ QEMU_CAPS_USB_REDIR_BOOTINDEX,
+ QEMU_CAPS_USB_HOST_BOOTINDEX);
+ DO_TEST("qemu-kvm-1.2.0", 1002000, 1, 0,
+ QEMU_CAPS_VNC_COLON,
+ QEMU_CAPS_NO_REBOOT,
+ QEMU_CAPS_DRIVE,
+ QEMU_CAPS_NAME,
+ QEMU_CAPS_UUID,
+ QEMU_CAPS_VNET_HDR,
+ QEMU_CAPS_MIGRATE_QEMU_TCP,
+ QEMU_CAPS_MIGRATE_QEMU_EXEC,
+ QEMU_CAPS_DRIVE_CACHE_V2,
+ QEMU_CAPS_KVM,
+ QEMU_CAPS_DRIVE_CACHE_UNSAFE,
+ QEMU_CAPS_DRIVE_FORMAT,
+ QEMU_CAPS_DRIVE_SERIAL,
+ QEMU_CAPS_XEN_DOMID,
+ QEMU_CAPS_DRIVE_READONLY,
+ QEMU_CAPS_VGA,
+ QEMU_CAPS_0_10,
+ QEMU_CAPS_MEM_PATH,
+ QEMU_CAPS_SDL,
+ QEMU_CAPS_MIGRATE_QEMU_UNIX,
+ QEMU_CAPS_CHARDEV,
+ QEMU_CAPS_ENABLE_KVM,
+ QEMU_CAPS_MONITOR_JSON,
+ QEMU_CAPS_BALLOON,
+ QEMU_CAPS_DEVICE,
+ QEMU_CAPS_SMP_TOPOLOGY,
+ QEMU_CAPS_NETDEV,
+ QEMU_CAPS_RTC,
+ QEMU_CAPS_VHOST_NET,
+ QEMU_CAPS_NO_HPET,
+ QEMU_CAPS_NO_KVM_PIT,
QEMU_CAPS_PCI_CONFIGFD,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_BOOT_MENU,
@@ -825,7 +920,9 @@ mymain(void)
QEMU_CAPS_PCI_BOOTINDEX,
QEMU_CAPS_CCID_EMULATED,
QEMU_CAPS_CCID_PASSTHRU,
+ QEMU_CAPS_CHARDEV_SPICEVMC,
QEMU_CAPS_VIRTIO_TX_ALG,
+ QEMU_CAPS_DEVICE_QXL_VGA,
QEMU_CAPS_PCI_MULTIFUNCTION,
QEMU_CAPS_VIRTIO_IOEVENTFD,
QEMU_CAPS_SGA,
@@ -838,6 +935,7 @@ mymain(void)
QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_VT82C686B_USB_UHCI,
QEMU_CAPS_PCI_OHCI,
+ QEMU_CAPS_USB_REDIR,
QEMU_CAPS_USB_HUB,
QEMU_CAPS_NO_SHUTDOWN,
QEMU_CAPS_PCI_ROMBAR,
@@ -861,10 +959,16 @@ mymain(void)
QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_VIRTIO_SCSI_PCI,
QEMU_CAPS_BLOCKIO,
+ QEMU_CAPS_DISABLE_S3,
+ QEMU_CAPS_DISABLE_S4,
+ QEMU_CAPS_USB_REDIR_FILTER,
+ QEMU_CAPS_IDE_DRIVE_WWN,
QEMU_CAPS_SCSI_DISK_WWN,
QEMU_CAPS_SECCOMP_SANDBOX,
QEMU_CAPS_DUMP_GUEST_CORE,
- QEMU_CAPS_VNC);
+ QEMU_CAPS_VNC,
+ QEMU_CAPS_USB_REDIR_BOOTINDEX,
+ QEMU_CAPS_USB_HOST_BOOTINDEX);
return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE;
}
--
1.7.8.6
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list