Re: [PATCH v14] support offline migration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



在 2012-11-16五的 13:59 +0100,Jiri Denemark写道:
> On Mon, Nov 12, 2012 at 09:57:29 +0800, liguang wrote:
> > original migration did not aware of offline case,
> > so, try to support offline migration quietly
> > (did not disturb original migration) by pass
> > VIR_MIGRATE_OFFLINE flag to migration APIs if only
> > the domain is really inactive, and
> > migration process will not puzzled by domain
> > offline and exit unexpectedly.
> > these changes did not take care of disk images the
> > domain required, for them could be transferred by
> > other APIs as suggested, then VIR_MIGRATE_OFFLINE
> > must not combined with VIR_MIGRATE_NON_SHARED_*.
> > and you must do a persistent migration at same time,
> > do "virsh migrate --offline --persistent ...".
> > 
> > Signed-off-by: liguang <lig.fnst@xxxxxxxxxxxxxx>
> > ---
> >  include/libvirt/libvirt.h.in |    1 +
> >  src/qemu/qemu_driver.c       |   16 +++---
> >  src/qemu/qemu_migration.c    |  110 ++++++++++++++++++++++++++++--------------
> >  src/qemu/qemu_migration.h    |    9 ++-
> >  tools/virsh-domain.c         |    5 ++
> >  tools/virsh.pod              |    5 +-
> >  6 files changed, 97 insertions(+), 49 deletions(-)
> > 
> > diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in
> > index fe58c08..1e0500d 100644
> > --- a/include/libvirt/libvirt.h.in
> > +++ b/include/libvirt/libvirt.h.in
> > @@ -1090,6 +1090,7 @@ typedef enum {
> >                                                 * whole migration process; this will be used automatically
> >                                                 * when supported */
> >      VIR_MIGRATE_UNSAFE            = (1 << 9), /* force migration even if it is considered unsafe */
> > +    VIR_MIGRATE_OFFLINE           = (1 << 10), /* offline migrate */
> >  } virDomainMigrateFlags;
> >  
> >  /* Domain migration. */
> > diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
> > index 978af57..5f91688 100644
> > --- a/src/qemu/qemu_driver.c
> > +++ b/src/qemu/qemu_driver.c
> > @@ -9594,7 +9594,7 @@ qemudDomainMigratePrepareTunnel(virConnectPtr dconn,
> >  
> >      ret = qemuMigrationPrepareTunnel(driver, dconn,
> >                                       NULL, 0, NULL, NULL, /* No cookies in v2 */
> > -                                     st, dname, dom_xml);
> > +                                     st, dname, dom_xml, flags);
> >  
> >  cleanup:
> >      qemuDriverUnlock(driver);
> > @@ -9654,7 +9654,7 @@ qemudDomainMigratePrepare2(virConnectPtr dconn,
> >      ret = qemuMigrationPrepareDirect(driver, dconn,
> >                                       NULL, 0, NULL, NULL, /* No cookies */
> >                                       uri_in, uri_out,
> > -                                     dname, dom_xml);
> > +                                     dname, dom_xml, flags);
> >  
> >  cleanup:
> >      qemuDriverUnlock(driver);
> > @@ -9796,7 +9796,7 @@ qemuDomainMigrateBegin3(virDomainPtr domain,
> >          asyncJob = QEMU_ASYNC_JOB_NONE;
> >      }
> >  
> > -    if (!virDomainObjIsActive(vm)) {
> > +    if (!virDomainObjIsActive(vm) && !(flags & VIR_MIGRATE_OFFLINE)) {
> >          virReportError(VIR_ERR_OPERATION_INVALID,
> >                         "%s", _("domain is not running"));
> >          goto endjob;
> > @@ -9805,9 +9805,9 @@ qemuDomainMigrateBegin3(virDomainPtr domain,
> >      /* Check if there is any ejected media.
> >       * We don't want to require them on the destination.
> >       */
> > -
> > -    if (qemuDomainCheckEjectableMedia(driver, vm, asyncJob) < 0)
> > -        goto endjob;
> > +    if (virDomainObjIsActive(vm) && (flags & VIR_MIGRATE_OFFLINE))
> > +        if (qemuDomainCheckEjectableMedia(driver, vm, asyncJob) < 0)
> > +            goto endjob;
> 
> This condition is wrong, you actually want to call
> qemuDomainCheckEjectableMedia iff the migration is NOT offline and in that
> case we already know the domain is active. Thus
> 
>     if (!(flags & VIR_MIGRATE_OFFLINE) &&
>         qemuDomainCheckEjectableMedia(driver, vm, asyncJob) < 0)
>         goto enjob;
> 
> is how it should look like.
> 

Okay

> >  
> >      if (!(xml = qemuMigrationBegin(driver, vm, xmlin, dname,
> >                                     cookieout, cookieoutlen,
> > @@ -9891,7 +9891,7 @@ qemuDomainMigratePrepare3(virConnectPtr dconn,
> >                                       cookiein, cookieinlen,
> >                                       cookieout, cookieoutlen,
> >                                       uri_in, uri_out,
> > -                                     dname, dom_xml);
> > +                                     dname, dom_xml, flags);
> >  
> >  cleanup:
> >      qemuDriverUnlock(driver);
> > @@ -9936,7 +9936,7 @@ qemuDomainMigratePrepareTunnel3(virConnectPtr dconn,
> >      ret = qemuMigrationPrepareTunnel(driver, dconn,
> >                                       cookiein, cookieinlen,
> >                                       cookieout, cookieoutlen,
> > -                                     st, dname, dom_xml);
> > +                                     st, dname, dom_xml, flags);
> >      qemuDriverUnlock(driver);
> >  
> >  cleanup:
> > diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c
> > index 5f8a9c5..2479114 100644
> > --- a/src/qemu/qemu_migration.c
> > +++ b/src/qemu/qemu_migration.c
> > @@ -1443,6 +1443,20 @@ char *qemuMigrationBegin(struct qemud_driver *driver,
> >                                  QEMU_MIGRATION_COOKIE_LOCKSTATE) < 0)
> >          goto cleanup;
> >  
> > +    if (flags & VIR_MIGRATE_OFFLINE) {
> > +        if (flags & (VIR_MIGRATE_NON_SHARED_DISK|
> 
> Just a nit, add space between "VIR_MIGRATE_NON_SHARED_DISK" and '|'.

Okay

> 
> > +                     VIR_MIGRATE_NON_SHARED_INC)) {
> > +            virReportError(VIR_ERR_OPERATION_INVALID,
> > +                           "%s", _("offline migration cannot handle non-shared storage"));
> > +            goto cleanup;
> > +        }
> > +        if (!(flags & VIR_MIGRATE_PERSIST_DEST)) {
> > +            virReportError(VIR_ERR_OPERATION_INVALID,
> > +                           "%s", _("offline migration must be specified with the persistent flag set"));
> > +            goto cleanup;
> > +        }
> > +    }
> > +
> >      if (xmlin) {
> >          if (!(def = virDomainDefParseString(driver->caps, xmlin,
> >                                              QEMU_EXPECTED_VIRT_TYPES,
> 
> And as I said in v13, please, wrap the long lines so that they fit in 80
> characters.

Okay

> 
> > @@ -1500,7 +1514,8 @@ qemuMigrationPrepareAny(struct qemud_driver *driver,
> >                          const char *dname,
> >                          const char *dom_xml,
> >                          const char *migrateFrom,
> > -                        virStreamPtr st)
> > +                        virStreamPtr st,
> > +                        unsigned long flags)
> >  {
> >      virDomainDefPtr def = NULL;
> >      virDomainObjPtr vm = NULL;
> > @@ -1610,15 +1625,17 @@ qemuMigrationPrepareAny(struct qemud_driver *driver,
> >      /* Start the QEMU daemon, with the same command-line arguments plus
> >       * -incoming $migrateFrom
> >       */
> > -    if (qemuProcessStart(dconn, driver, vm, migrateFrom, dataFD[0], NULL, NULL,
> > -                         VIR_NETDEV_VPORT_PROFILE_OP_MIGRATE_IN_START,
> > -                         VIR_QEMU_PROCESS_START_PAUSED |
> > -                         VIR_QEMU_PROCESS_START_AUTODESROY) < 0) {
> > -        virDomainAuditStart(vm, "migrated", false);
> > -        /* Note that we don't set an error here because qemuProcessStart
> > -         * should have already done that.
> > -         */
> > -        goto endjob;
> > +    if (!(flags & VIR_MIGRATE_OFFLINE)) {
> > +        if (qemuProcessStart(dconn, driver, vm, migrateFrom, dataFD[0], NULL, NULL,
> > +                             VIR_NETDEV_VPORT_PROFILE_OP_MIGRATE_IN_START,
> > +                             VIR_QEMU_PROCESS_START_PAUSED |
> > +                             VIR_QEMU_PROCESS_START_AUTODESROY) < 0) {
> > +            virDomainAuditStart(vm, "migrated", false);
> > +            /* Note that we don't set an error here because qemuProcessStart
> > +             * should have already done that.
> > +             */
> > +            goto endjob;
> > +        }
> >      }
> >  
> >      if (tunnel) {
> > @@ -1626,7 +1643,8 @@ qemuMigrationPrepareAny(struct qemud_driver *driver,
> >              virReportSystemError(errno, "%s",
> >                                   _("cannot pass pipe for tunnelled migration"));
> >              virDomainAuditStart(vm, "migrated", false);
> > -            qemuProcessStop(driver, vm, VIR_DOMAIN_SHUTOFF_FAILED, 0);
> > +            if (!(flags & VIR_MIGRATE_OFFLINE))
> > +                qemuProcessStop(driver, vm, VIR_DOMAIN_SHUTOFF_FAILED, 0);
> >              goto endjob;
> >          }
> >          dataFD[1] = -1; /* 'st' owns the FD now & will close it */
> 
> Oh well, is there any reason why you changed the code in
> qemuMigrationPrepareAny you had in v13 and was mostly right (except for using

you reminded me of an active domain to be migrated by offline mechanism,
so I try to do much more preparation, in addition, prepare a stream for
tunnel v3 requirement.

> migration cookie) to something like this? Just add
> 
>     if (flags & VIR_MIGRATE_OFFLINE) {
>         ret = 0;
>         goto done;
>     }
> 
> below the "vm->def->id = -1;" line. And add the "done" label above
> qemuDomainCleanupAdd() and make virDomainAuditStart and event creation
> conditional for non-offline migrations only. It's also possible that we
> actually need to bake migration cookie (although with 0 flags) so we may need
> to move the "done" label few lines to the top and do some additional magic.
> But I'm not 100% sure about that. And yes, I realize I messed this part a bit
> last time since I suggested placing "done" few lines further, which would skip
> the call to qemuDomainCleanupAdd. Sorry about that.
> 
> > @@ -1709,7 +1727,8 @@ qemuMigrationPrepareTunnel(struct qemud_driver *driver,
> >                             int *cookieoutlen,
> >                             virStreamPtr st,
> >                             const char *dname,
> > -                           const char *dom_xml)
> > +                           const char *dom_xml,
> > +                           unsigned long flags)
> >  {
> >      int ret;
> >  
> > @@ -1723,7 +1742,7 @@ qemuMigrationPrepareTunnel(struct qemud_driver *driver,
> >       */
> >      ret = qemuMigrationPrepareAny(driver, dconn, cookiein, cookieinlen,
> >                                    cookieout, cookieoutlen, dname, dom_xml,
> > -                                  "stdio", st);
> > +                                  "stdio", st, flags);
> >      return ret;
> >  }
> >  
> > @@ -1738,7 +1757,8 @@ qemuMigrationPrepareDirect(struct qemud_driver *driver,
> >                             const char *uri_in,
> >                             char **uri_out,
> >                             const char *dname,
> > -                           const char *dom_xml)
> > +                           const char *dom_xml,
> > +                           unsigned long flags)
> >  {
> >      static int port = 0;
> >      int this_port;
> > @@ -1834,7 +1854,7 @@ qemuMigrationPrepareDirect(struct qemud_driver *driver,
> >  
> >      ret = qemuMigrationPrepareAny(driver, dconn, cookiein, cookieinlen,
> >                                    cookieout, cookieoutlen, dname, dom_xml,
> > -                                  migrateFrom, NULL);
> > +                                  migrateFrom, NULL, flags);
> >  cleanup:
> >      VIR_FREE(hostname);
> >      if (ret != 0)
> > @@ -2280,7 +2300,7 @@ cleanup:
> >          orig_err = virSaveLastError();
> >  
> >      if (spec->fwdType != MIGRATION_FWD_DIRECT) {
> > -        if (iothread && qemuMigrationStopTunnel(iothread, ret < 0) < 0)
> > +       if (iothread && qemuMigrationStopTunnel(iothread, ret < 0) < 0)
> 
> Looks like an accidental change.
> 
> >              ret = -1;
> >          VIR_FORCE_CLOSE(fd);
> >      }
> > @@ -2353,6 +2373,9 @@ static int doNativeMigrate(struct qemud_driver *driver,
> >      if (!uribits)
> >          return -1;
> >  
> > +    if (flags & VIR_MIGRATE_OFFLINE)
> > +        return 0;
> > +
> >      if (qemuCapsGet(priv->caps, QEMU_CAPS_MIGRATE_QEMU_FD))
> >          spec.destType = MIGRATION_DEST_CONNECT_HOST;
> >      else
> 
> We should not be doing this hacking deep inside Perform phase, which should
> rather be skipped completely during offline migration.

Okay, I will skip perform phase.

> 
> > @@ -2665,10 +2688,18 @@ static int doPeer2PeerMigrate3(struct qemud_driver *driver,
> >               uri, &uri_out, flags, dname, resource, dom_xml);
> >          qemuDomainObjExitRemoteWithDriver(driver, vm);
> >      }
> > +
> >      VIR_FREE(dom_xml);
> > +
> >      if (ret == -1)
> >          goto cleanup;
> >  
> > +    if (flags & VIR_MIGRATE_OFFLINE) {
> > +        cookieout = NULL;
> > +        cookieoutlen = 0;
> 
> And these two lines seem to confirm we really should not skip baking the
> cookie in PrepareAny (or just setting it to NULL with 0 len) rather than doing
> this hack here.

skip baking in PrepareAny?
did not see it.

> 
> > +        goto finish;
> > +    }
> > +
> >      if (!(flags & VIR_MIGRATE_TUNNELLED) &&
> >          (uri_out == NULL)) {
> >          virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> > @@ -2771,7 +2802,7 @@ finish:
> >                   vm->def->name);
> >  
> >   cleanup:
> > -    if (ddomain) {
> > +    if (ddomain || (flags & VIR_MIGRATE_OFFLINE)) {
> >          virObjectUnref(ddomain);
> >          ret = 0;
> >      } else {
> 
> As I said several times already, this code would just ignore any error that
> might have happened so far. If we get here during offline migration with
> ddomain == NULL, we would pretend everything went ok and return 0. It's
> certainly possible I'm just missing something and my statement is not quite
> right but so far you haven't said anything that would make me think so.
> Please, either remove this change or explain in detail why it is needed and
> why the thing I'm saying is wrong.

you're right, Thanks!

> 
> You said "or you'll get an error for ret = -1". Does that mean we can get here
> with ddomain == NULL even though everything succeeded? If so it's
> qemuMigrationFinish that needs to be fixed to properly return non-NULL when
> offline migration succeeded. However, looking at the code qemuMigrationFinish
> looks like it should already do so.
> 
> > @@ -2848,7 +2879,7 @@ static int doPeer2PeerMigrate(struct qemud_driver *driver,
> >      }
> >  
> >      /* domain may have been stopped while we were talking to remote daemon */
> > -    if (!virDomainObjIsActive(vm)) {
> > +    if (!virDomainObjIsActive(vm) && !(flags & VIR_MIGRATE_OFFLINE)) {
> >          virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> >                         _("guest unexpectedly quit"));
> >          goto cleanup;
> > @@ -2911,7 +2942,7 @@ qemuMigrationPerformJob(struct qemud_driver *driver,
> >      if (qemuMigrationJobStart(driver, vm, QEMU_ASYNC_JOB_MIGRATION_OUT) < 0)
> >          goto cleanup;
> >  
> > -    if (!virDomainObjIsActive(vm)) {
> > +    if (!virDomainObjIsActive(vm) && !(flags & VIR_MIGRATE_OFFLINE)) {
> >          virReportError(VIR_ERR_OPERATION_INVALID,
> >                         "%s", _("domain is not running"));
> >          goto endjob;
> > @@ -3235,26 +3266,27 @@ qemuMigrationFinish(struct qemud_driver *driver,
> >       * object, but if no, clean up the empty qemu process.
> >       */
> >      if (retcode == 0) {
> > -        if (!virDomainObjIsActive(vm)) {
> > +        if (!virDomainObjIsActive(vm) && !(flags & VIR_MIGRATE_OFFLINE)) {
> >              virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
> >                             _("guest unexpectedly quit"));
> >              goto endjob;
> >          }
> >  
> > -        if (qemuMigrationVPAssociatePortProfiles(vm->def) < 0) {
> > -            qemuProcessStop(driver, vm, VIR_DOMAIN_SHUTOFF_FAILED,
> > -                            VIR_QEMU_PROCESS_STOP_MIGRATED);
> > -            virDomainAuditStop(vm, "failed");
> > -            event = virDomainEventNewFromObj(vm,
> > -                                             VIR_DOMAIN_EVENT_STOPPED,
> > -                                             VIR_DOMAIN_EVENT_STOPPED_FAILED);
> > -            goto endjob;
> > +        if (!(flags & VIR_MIGRATE_OFFLINE)) {
> > +            if (qemuMigrationVPAssociatePortProfiles(vm->def) < 0) {
> > +                qemuProcessStop(driver, vm, VIR_DOMAIN_SHUTOFF_FAILED,
> > +                                VIR_QEMU_PROCESS_STOP_MIGRATED);
> > +                virDomainAuditStop(vm, "failed");
> > +                event = virDomainEventNewFromObj(vm,
> > +                                                 VIR_DOMAIN_EVENT_STOPPED,
> > +                                                 VIR_DOMAIN_EVENT_STOPPED_FAILED);
> > +                goto endjob;
> > +            }
> > +            if (mig->network)
> > +                if (qemuDomainMigrateOPDRelocate(driver, vm, mig) < 0)
> > +                    VIR_WARN("unable to provide network data for relocation");
> >          }
> >  
> > -        if (mig->network)
> > -            if (qemuDomainMigrateOPDRelocate(driver, vm, mig) < 0)
> > -                VIR_WARN("unable to provide network data for relocation");
> > -
> >          if (flags & VIR_MIGRATE_PERSIST_DEST) {
> >              virDomainDefPtr vmdef;
> >              if (vm->persistent)
> > @@ -3302,7 +3334,7 @@ qemuMigrationFinish(struct qemud_driver *driver,
> >              event = NULL;
> >          }
> >  
> > -        if (!(flags & VIR_MIGRATE_PAUSED)) {
> > +        if (!(flags & VIR_MIGRATE_PAUSED) && !(flags & VIR_MIGRATE_OFFLINE)) {
> >              /* run 'cont' on the destination, which allows migration on qemu
> >               * >= 0.10.6 to work properly.  This isn't strictly necessary on
> >               * older qemu's, but it also doesn't hurt anything there
> > @@ -3351,9 +3383,11 @@ qemuMigrationFinish(struct qemud_driver *driver,
> >                                               VIR_DOMAIN_EVENT_SUSPENDED,
> >                                               VIR_DOMAIN_EVENT_SUSPENDED_PAUSED);
> >          }
> > -        if (virDomainSaveStatus(driver->caps, driver->stateDir, vm) < 0) {
> > -            VIR_WARN("Failed to save status on vm %s", vm->def->name);
> > -            goto endjob;
> > +        if (virDomainObjIsActive(vm)) {
> > +            if (virDomainSaveStatus(driver->caps, driver->stateDir, vm) < 0) {
> > +                VIR_WARN("Failed to save status on vm %s", vm->def->name);
> > +                goto endjob;
> > +            }
> >          }
> 
> We should also skip generating the events. Or even better, we should emit
> VIR_DOMAIN_EVENT_DEFINED for offline migration.

Okay, I will skip.

> 
> >  
> >          /* Guest is successfully running, so cancel previous auto destroy */
> > @@ -3420,6 +3454,9 @@ int qemuMigrationConfirm(struct qemud_driver *driver,
> >      if (!(mig = qemuMigrationEatCookie(driver, vm, cookiein, cookieinlen, 0)))
> >          return -1;
> >  
> > +    if (flags & VIR_MIGRATE_OFFLINE)
> > +        goto done;
> > +
> >      /* Did the migration go as planned?  If yes, kill off the
> >       * domain object, but if no, resume CPUs
> >       */
> > @@ -3455,6 +3492,7 @@ int qemuMigrationConfirm(struct qemud_driver *driver,
> >          }
> >      }
> >  
> > +done:
> >      qemuMigrationCookieFree(mig);
> >      rv = 0;
> >  
> > diff --git a/src/qemu/qemu_migration.h b/src/qemu/qemu_migration.h
> > index 7a2269a..f2dc5aa 100644
> > --- a/src/qemu/qemu_migration.h
> > +++ b/src/qemu/qemu_migration.h
> > @@ -36,7 +36,8 @@
> >       VIR_MIGRATE_NON_SHARED_DISK |              \
> >       VIR_MIGRATE_NON_SHARED_INC |               \
> >       VIR_MIGRATE_CHANGE_PROTECTION |            \
> > -     VIR_MIGRATE_UNSAFE)
> > +     VIR_MIGRATE_UNSAFE |                       \
> > +     VIR_MIGRATE_OFFLINE)
> >  
> >  enum qemuMigrationJobPhase {
> >      QEMU_MIGRATION_PHASE_NONE = 0,
> > @@ -97,7 +98,8 @@ int qemuMigrationPrepareTunnel(struct qemud_driver *driver,
> >                                 int *cookieoutlen,
> >                                 virStreamPtr st,
> >                                 const char *dname,
> > -                               const char *dom_xml);
> > +                               const char *dom_xml,
> > +                               unsigned long flags);
> >  
> >  int qemuMigrationPrepareDirect(struct qemud_driver *driver,
> >                                 virConnectPtr dconn,
> > @@ -108,7 +110,8 @@ int qemuMigrationPrepareDirect(struct qemud_driver *driver,
> >                                 const char *uri_in,
> >                                 char **uri_out,
> >                                 const char *dname,
> > -                               const char *dom_xml);
> > +                               const char *dom_xml,
> > +                               unsigned long flags);
> >  
> >  int qemuMigrationPerform(struct qemud_driver *driver,
> >                           virConnectPtr conn,
> > diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
> > index 393b67b..39674ba 100644
> > --- a/tools/virsh-domain.c
> > +++ b/tools/virsh-domain.c
> > @@ -6644,6 +6644,7 @@ static const vshCmdInfo info_migrate[] = {
> >  
> >  static const vshCmdOptDef opts_migrate[] = {
> >      {"live", VSH_OT_BOOL, 0, N_("live migration")},
> > +    {"offline", VSH_OT_BOOL, 0, N_("offline (domain's inactive) migration")},
> >      {"p2p", VSH_OT_BOOL, 0, N_("peer-2-peer migration")},
> >      {"direct", VSH_OT_BOOL, 0, N_("direct migration")},
> >      {"tunneled", VSH_OT_ALIAS, 0, "tunnelled"},
> > @@ -6729,6 +6730,10 @@ doMigrate(void *opaque)
> >      if (vshCommandOptBool(cmd, "unsafe"))
> >          flags |= VIR_MIGRATE_UNSAFE;
> >  
> > +    if (vshCommandOptBool(cmd, "offline")) {
> > +        flags |= VIR_MIGRATE_OFFLINE;
> > +    }
> > +
> >      if (xmlfile &&
> >          virFileReadAll(xmlfile, 8192, &xml) < 0) {
> >          vshError(ctl, _("file '%s' doesn't exist"), xmlfile);
> > diff --git a/tools/virsh.pod b/tools/virsh.pod
> > index e0c6b42..2545455 100644
> > --- a/tools/virsh.pod
> > +++ b/tools/virsh.pod
> > @@ -1026,13 +1026,14 @@ I<--total> for only the total stats, I<start> for only the per-cpu
> >  stats of the CPUs from I<start>, I<count> for only I<count> CPUs'
> >  stats.
> >  
> > -=item B<migrate> [I<--live>] [I<--direct>] [I<--p2p> [I<--tunnelled>]]
> > +=item B<migrate> [I<--live>] [I<--offline>] [I<--direct>] [I<--p2p> [I<--tunnelled>]]
> >  [I<--persistent>] [I<--undefinesource>] [I<--suspend>] [I<--copy-storage-all>]
> >  [I<--copy-storage-inc>] [I<--change-protection>] [I<--unsafe>] [I<--verbose>]
> >  I<domain> I<desturi> [I<migrateuri>] [I<dname>]
> >  [I<--timeout> B<seconds>] [I<--xml> B<file>]
> >  
> > -Migrate domain to another host.  Add I<--live> for live migration; I<--p2p>
> > +Migrate domain to another host.  Add I<--live> for live migration;
> > +I<--offline> for offline (domain's inactive) migration; <--p2p>
> >  for peer-2-peer migration; I<--direct> for direct migration; or I<--tunnelled>
> >  for tunnelled migration.  I<--persistent> leaves the domain persistent on
> >  destination host, I<--undefinesource> undefines the domain on the source host,
> 
> I'm afraid we need yet another version of this patch :-(

Okay, Thanks for your kind comment!

> 
> Jirka

-- 
li guang  lig.fnst@xxxxxxxxxxxxxx
linux kernel team at FNST, china


--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list



[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]