How would one specify VLAN trunk mode with only one vlan tag present? On Wed, Aug 8, 2012 at 2:47 PM, Kyle Mestery <kmestery@xxxxxxxxx> wrote: > With this change, it is now possible to support VLANs (both access and trunks) > for openvswitch ports in libvirt. This also takes into account the profileid > parameter, as the vlantag parameter is also optional. > > Examples of this configuration are below. > > Setup the port as an access port: > > <interface type='bridge'> > <mac address='52:54:00:30:23:a6'/> > <source bridge='data-br'/> > <virtualport type='openvswitch'> > <parameters interfaceid='cdbbbc31-b7fe-16ca-a715-cc7cc76e18b2' vlantag='70'/> > </virtualport> > <model type='virtio'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> > </interface> > > Setup the port as an trunk port: > > <interface type='bridge'> > <mac address='52:54:00:30:23:a6'/> > <source bridge='data-br'/> > <virtualport type='openvswitch'> > <parameters interfaceid='cdbbbc31-b7fe-16ca-a715-cc7cc76e18b2' vlantag='70,71,72'/> > </virtualport> > <model type='virtio'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> > </interface> > > src/conf/netdev_vport_profile_conf.c | 34 ++++++++++++++++++++++++++++++---- > src/util/virnetdevopenvswitch.c | 23 +++++++++++++++++++++-- > src/util/virnetdevvportprofile.h | 2 ++ > 3 files changed, 53 insertions(+), 6 deletions(-) > > -- > 1.7.11.2 > > -- > libvir-list mailing list > libvir-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/libvir-list -- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list