Re: [Users] Host missing ­cpuFlags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On 05/04/2012 09:23 AM, ovirt@xxxxxx wrote:

Engine is incorrectly show cpu name (cluster compatibility is set to 3.1)

all hosts in my cluster engine are shown as Conroe, but I have 2 hosts
from Nehalem family and 2 from SandyBridge

this host must be SandyBridge but shown as Conroe
vdsm reports the model at the end of the cpuFlags based on libvirt reporting models. cc'ing libvirt list for their thoughts. 



# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:7e8ac59efbe0'}], 'FC': []}
ISCSIInitiatorName = iqn.1994-05.com.redhat:7e8ac59efbe0
bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask':
'', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '',
'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu': '1500',
'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond2':
{'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [],
'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {}, 'mtu':
'1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}}
clusterLevels = ['3.0', '3.1']
cpuCores = 4
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_coreduo,model_Conroe
cpuModel = Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz
cpuSockets = 1
cpuSpeed = 1600.000
emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12',
'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13',
'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
guestOverhead = 65
hooks = {}
kvmEnabled = true
lastClient = 192.168.131.42
lastClientIface = ovirtmgmt
management_ip =
memSize = 16032
networks = {'ovirtmgmt': {'addr': '192.168.130.73', 'cfg': {'DELAY':
'0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt',
'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask':
'255.255.0.0', 'stp': 'off', 'bridged': 'True', 'gateway':
'192.168.131.17', 'ports': ['p6p1']}, 'Storage': {'addr':
'172.16.0.100', 'cfg': {'IPADDR': '172.16.0.100', 'DELAY': '0',
'NETMASK': '255.255.255.0', 'STP': 'no', 'DEVICE': 'Storage', 'TYPE':
'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0',
'stp': 'off', 'bridged': 'True', 'gateway': '0.0.0.0', 'ports': ['p4p1']}}
nics = {'p4p1': {'hwaddr': '00:1B:21:1D:B6:E2', 'netmask': '', 'speed':
1000, 'addr': '', 'mtu': '1500'}, 'p6p1': {'hwaddr':
'54:04:A6:A1:BA:39', 'netmask': '', 'speed': 1000, 'addr': '', 'mtu':
'1500'}}
operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'}
packages2 = {'kernel': {'release': '6.fc16.x86_64', 'buildtime':
1334997800.0, 'version': '3.3.2'}, 'spice-server': {'release': '1.fc16',
'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release':
'0.161.git094ec00.fc16', 'buildtime': '1336045451', 'version': '4.9.6'},
'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version':
'0.15.1'}, 'libvirt': {'release': '1.fc16', 'buildtime': '1336048215',
'version': '0.9.11.3'}, 'qemu-img': {'release': '4.fc16', 'buildtime':
'1327954752', 'version': '0.15.1'}}
reservedMem = 321
software_revision = 0
software_version = 4.9
supportedProtocols = ['2.2', '2.3']
supportedRHEVMs = ['3.0']
uuid = 1C8F4D00-5BCB-11D9-8A55-5404A6A1BA39_00:1B:21:1D:B6:E2
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']



this host must be Nehalem but shown as Conroe

# vdsClient -s 0 getVdsCaps
HBAInventory = {'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:972b88629c1'}], 'FC': []}
ISCSIInitiatorName = iqn.1994-05.com.redhat:972b88629c1
bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask':
'', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '',
'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu': '1500',
'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond2':
{'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [],
'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {}, 'mtu':
'1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}}
clusterLevels = ['3.0', '3.1']
cpuCores = 8
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,lahf_lm,ida,arat,epb,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_coreduo,model_Conroe
cpuModel = Intel(R) Xeon(R) CPU E5620 @ 2.40GHz
cpuSockets = 2
cpuSpeed = 1600.000
emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12',
'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13',
'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
guestOverhead = 65
hooks = {}
kvmEnabled = true
lastClient = 192.168.131.42
lastClientIface = ovirtmgmt
management_ip =
memSize = 36200
networks = {'ovirtmgmt': {'addr': '192.168.131.46', 'cfg': {'DELAY':
'0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt',
'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask':
'255.255.0.0', 'stp': 'off', 'bridged': 'True', 'gateway':
'192.168.131.17', 'ports': ['em1']}, 'Storage': {'addr': '172.16.0.104',
'cfg': {'IPADDR': '172.16.0.104', 'DELAY': '0', 'NM_CONTROLLED': 'no',
'NETMASK': '255.255.255.0', 'STP': 'no', 'DEVICE': 'Storage', 'TYPE':
'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0',
'stp': 'off', 'bridged': 'True', 'gateway': '0.0.0.0', 'ports': ['em2']}}
nics = {'em1': {'hwaddr': '00:25:90:66:53:E8', 'netmask': '', 'speed':
1000, 'addr': '', 'mtu': '1500'}, 'em2': {'hwaddr': '00:25:90:66:53:E9',
'netmask': '', 'speed': 100, 'addr': '', 'mtu': '1500'}}
operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'}
packages2 = {'kernel': {'release': '6.fc16.x86_64', 'buildtime':
1334997800.0, 'version': '3.3.2'}, 'spice-server': {'release': '1.fc16',
'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release':
'0.155.git457d1a0.fc16', 'buildtime': '1335883691', 'version': '4.9.6'},
'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version':
'0.15.1'}, 'libvirt': {'release': '1.fc16', 'buildtime': '1335356374',
'version': '0.9.11'}, 'qemu-img': {'release': '4.fc16', 'buildtime':
'1327954752', 'version': '0.15.1'}}
reservedMem = 321
software_revision = 0
software_version = 4.9
supportedProtocols = ['2.2', '2.3']
supportedRHEVMs = ['3.0']
uuid = 49434D53-0200-9066-2500-66902500E853_00:25:90:66:53:E8
version_name = Snow Man
vlans = {}
vmTypes = ['kvm']



Птн 04 Май 2012 09:14:22 +0400, Itamar Heim <iheim@xxxxxxxxxx> написал:

    On 05/04/2012 06:49 AM, Nicholas Kesick wrote:
     > I managed to get a host successfully added into oVirt Manager
    (Fedora16
     > minimum install, then used the wiki RPM install method), but the
    last
     > event reports "Host <hostname> moved to Non-operational state as
    host
     > does not meet the cluster's minimum CPU level. Missing CPU features:
     > CpuFlags"
     >
     > Can anyone shine some light on the problem? The CPU does support
     > virtualization... and as far as I can tell from cat /proc/cpuinfo
    does
     > does have cpu flags.
     > flags : fpu vme de pse tsc msr *pae* mce cx8 apic sep mtrr pge
    mca cmov
     > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall
    nx lm
     > constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl *vmx* est
    cid cx16
     > xtpr pdcm lahf_lm tpr_shadow

    what is the cpu level of the cluster?
    what cluster compatibility level?
    what does vdsClient -s 0 getVdsCaps shows for cpu flags?

     >
     > Many thanks
     > - Nick
     >
     >
     > _______________________________________________
     > Users mailing list
     > Users@xxxxxxxxx
     > nicspellword"="">ovirt.org/mailman/listinfo/users" title="Открыть
    внешнюю ссылку">http://lists.ovirt.org/mailman/listinfo/users
    <http://lists.%3Cspan%20class=>

    _______________________________________________
    Users mailing list
    Users@xxxxxxxxx
    nicspellword"="">ovirt.org/mailman/listinfo/users" title="Открыть
    внешнюю ссылку">http://lists.ovirt.org/mailman/listinfo/users
    <http://lists.%3Cspan%20class=>



--



--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]