This is pretty straightforward - even though dnsmasq gets daemonized
and uses a pid file, those things are both handled by the dnsmasq
binary itself. And libvirt doesn't need any of the output of the
dnsmasq command either, so we just setup the args and call
virRun(). Mainly it was just a (mostly) mechanical job of replacing
the APPEND_ARG() macro (and some other *printfs()) with
virCommandAddArg*().
---
src/network/bridge_driver.c | 238 +++++++++++++++----------------------------
1 files changed, 80 insertions(+), 158 deletions(-)
diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c
index 62639e4..9802222 100644
--- a/src/network/bridge_driver.c
+++ b/src/network/bridge_driver.c
@@ -51,6 +51,7 @@
#include "event.h"
#include "buf.h"
#include "util.h"
+#include "command.h"
#include "memory.h"
#include "uuid.h"
#include "iptables.h"
@@ -390,25 +391,15 @@ networkSaveDnsmasqHostsfile(virNetworkObjPtr network,
static int
networkBuildDnsmasqArgv(virNetworkObjPtr network,
const char *pidfile,
- const char ***argv) {
- int i, len, r;
+ virCommandPtr cmd) {
+ int r, ret = -1;
int nbleases = 0;
- char *pidfileArg;
- char buf[1024];
- unsigned int ranges;
- char *ipAddr;
-
- /*
- * For static-only DHCP, i.e. with no range but at least one host element,
- * we have to add a special --dhcp-range option to enable the service in
- * dnsmasq.
- */
- ranges = network->def->nranges;
- if (!ranges && network->def->nhosts)
- ranges = 1;
+ char *bridgeaddr;
+ if (!(bridgeaddr = virSocketFormatAddr(&network->def->ipAddress)))
+ goto cleanup;
/*
- * NB, be careful about syntax for dnsmasq options in long format
+ * NB, be careful about syntax for dnsmasq options in long format.
*
* If the flag has a mandatory argument, it can be given using
* either syntax:
@@ -422,66 +413,27 @@ networkBuildDnsmasqArgv(virNetworkObjPtr network,
* --foo=bar
*
* It is hard to determine whether a flag is optional or not,
- * without reading the dnsmasq source :-( The manpages is not
- * very explicit on this
+ * without reading the dnsmasq source :-( The manpage is not
+ * very explicit on this.
*/
- len =
- 1 + /* dnsmasq */
- 1 + /* --strict-order */
- 1 + /* --bind-interfaces */
- (network->def->domain?2:0) + /* --domain name */
- 2 + /* --pid-file /var/run/libvirt/network/$NAME.pid */
- 2 + /* --conf-file "" */
- /*2 + *//* --interface virbr0 */
- 2 + /* --except-interface lo */
- 2 + /* --listen-address 10.0.0.1 */
- (2 * ranges) + /* --dhcp-range 10.0.0.2,10.0.0.254 */
- /* --dhcp-lease-max=xxx if needed */
- (network->def->nranges ? 1 : 0) +
- /* --dhcp-no-override if needed */
- (ranges ? 1 : 0) +
- /* --dhcp-hostsfile=/var/lib/dnsmasq/$NAME.hostsfile */
- (network->def->nhosts > 0 ? 1 : 0) +
- /* --enable-tftp --tftp-root /srv/tftp */
- (network->def->tftproot ? 3 : 0) +
- /* --dhcp-boot pxeboot.img[,,12.34.56.78] */
- (network->def->bootfile ? 2 : 0) +
- 1; /* NULL */
-
- if (VIR_ALLOC_N(*argv, len) < 0)
- goto no_memory;
-
-#define APPEND_ARG(v, n, s) do { \
- if (!((v)[(n)] = strdup(s))) \
- goto no_memory; \
- } while (0)
-
-#define APPEND_ARG_LIT(v, n, s) \
- (v)[(n)] = s
-
- i = 0;
-
- APPEND_ARG(*argv, i++, DNSMASQ);
-
/*
* Needed to ensure dnsmasq uses same algorithm for processing
* multiple namedriver entries in /etc/resolv.conf as GLibC.
*/
- APPEND_ARG(*argv, i++, "--strict-order");
- APPEND_ARG(*argv, i++, "--bind-interfaces");
+ virCommandAddArg(cmd, "--strict-order");
+ virCommandAddArg(cmd, "--bind-interfaces");
if (network->def->domain) {
- APPEND_ARG(*argv, i++, "--domain");
- APPEND_ARG(*argv, i++, network->def->domain);
+ virCommandAddArg(cmd, "--domain");
+ virCommandAddArg(cmd, network->def->domain);
}
- if (virAsprintf(&pidfileArg, "--pid-file=%s", pidfile) < 0)
- goto no_memory;
- APPEND_ARG_LIT(*argv, i++, pidfileArg);
+ virCommandAddArgPair(cmd, "--pid-file", pidfile);
- APPEND_ARG(*argv, i++, "--conf-file=");
- APPEND_ARG(*argv, i++, "");
+ /* *no* conf file */
+ virCommandAddArg(cmd, "--conf-file=");
+ virCommandAddArg(cmd, "");
/*
* XXX does not actually work, due to some kind of
@@ -489,166 +441,140 @@ networkBuildDnsmasqArgv(virNetworkObjPtr network,
* interface. A sleep(10) makes it work, but that's
* clearly not practical
*
- * APPEND_ARG(*argv, i++, "--interface");
- * APPEND_ARG(*argv, i++, network->def->bridge);
+ * virCommandAddArg(cmd, "--interface");
+ * virCommandAddArg(cmd, network->def->bridge);
*/
- APPEND_ARG(*argv, i++, "--listen-address");
- if (!(ipAddr = virSocketFormatAddr(&network->def->ipAddress)))
- goto error;
- APPEND_ARG_LIT(*argv, i++, ipAddr);
+ virCommandAddArg(cmd, "--listen-address");
+ virCommandAddArg(cmd, bridgeaddr);
- APPEND_ARG(*argv, i++, "--except-interface");
- APPEND_ARG(*argv, i++, "lo");
+ virCommandAddArg(cmd, "--except-interface");
+ virCommandAddArg(cmd, "lo");
for (r = 0 ; r < network->def->nranges ; r++) {
char *saddr = virSocketFormatAddr(&network->def->ranges[r].start);
if (!saddr)
- goto error;
+ goto cleanup;
char *eaddr = virSocketFormatAddr(&network->def->ranges[r].end);
if (!eaddr) {
VIR_FREE(saddr);
- goto error;
+ goto cleanup;
}
- char *range;
- int rc = virAsprintf(&range, "%s,%s", saddr, eaddr);
+ virCommandAddArg(cmd, "--dhcp-range");
+ virCommandAddArgFormat(cmd, "%s,%s", saddr, eaddr);
VIR_FREE(saddr);
VIR_FREE(eaddr);
- if (rc < 0)
- goto no_memory;
- APPEND_ARG(*argv, i++, "--dhcp-range");
- APPEND_ARG_LIT(*argv, i++, range);
nbleases += virSocketGetRange(&network->def->ranges[r].start,
&network->def->ranges[r].end);
}
+ /*
+ * For static-only DHCP, i.e. with no range but at least one host element,
+ * we have to add a special --dhcp-range option to enable the service in
+ * dnsmasq.
+ */
if (!network->def->nranges && network->def->nhosts) {
- char *ipaddr = virSocketFormatAddr(&network->def->ipAddress);
- if (!ipaddr)
- goto error;
- char *range;
- int rc = virAsprintf(&range, "%s,static", ipaddr);
- VIR_FREE(ipaddr);
- if (rc < 0)
- goto no_memory;
-
- APPEND_ARG(*argv, i++, "--dhcp-range");
- APPEND_ARG_LIT(*argv, i++, range);
+ virCommandAddArg(cmd, "--dhcp-range");
+ virCommandAddArgFormat(cmd, "%s,static", bridgeaddr);
}
if (network->def->nranges > 0) {
- snprintf(buf, sizeof(buf), "--dhcp-lease-max=%d", nbleases);
- APPEND_ARG(*argv, i++, buf);
+ virCommandAddArgFormat(cmd, "--dhcp-lease-max=%d", nbleases);
}
- if (ranges)
- APPEND_ARG(*argv, i++, "--dhcp-no-override");
+ if (network->def->nranges || network->def->nhosts)
+ virCommandAddArg(cmd, "--dhcp-no-override");
if (network->def->nhosts > 0) {
- dnsmasqContext *dctx = dnsmasqContextNew(network->def->name, DNSMASQ_STATE_DIR);
- char *hostsfileArg;
-
- if (dctx == NULL)
- goto no_memory;
+ dnsmasqContext *dctx = dnsmasqContextNew(network->def->name,
+ DNSMASQ_STATE_DIR);
+ if (dctx == NULL) {
+ virReportOOMError();
+ goto cleanup;
+ }
if (networkSaveDnsmasqHostsfile(network, dctx, false)) {
- if (virAsprintf(&hostsfileArg, "--dhcp-hostsfile=%s", dctx->hostsfile->path) < 0) {
- dnsmasqContextFree(dctx);
- goto no_memory;
- }
- APPEND_ARG_LIT(*argv, i++, hostsfileArg);
+ virCommandAddArgPair(cmd, "--dhcp-hostsfile",
+ dctx->hostsfile->path);
}
-
dnsmasqContextFree(dctx);
}
if (network->def->tftproot) {
- APPEND_ARG(*argv, i++, "--enable-tftp");
- APPEND_ARG(*argv, i++, "--tftp-root");
- APPEND_ARG(*argv, i++, network->def->tftproot);
+ virCommandAddArg(cmd, "--enable-tftp");
+ virCommandAddArg(cmd, "--tftp-root");
+ virCommandAddArg(cmd, network->def->tftproot);
}
if (network->def->bootfile) {
- char *ipaddr = NULL;
+
+ virCommandAddArg(cmd, "--dhcp-boot");
if (VIR_SOCKET_HAS_ADDR(&network->def->bootserver)) {
- if (!(ipaddr = virSocketFormatAddr(&network->def->bootserver)))
- goto error;
- }
- char *boot;
- int rc = virAsprintf(&boot, "%s%s%s",
- network->def->bootfile,
- ipaddr ? ",," : "",
- ipaddr ? ipaddr : "");
- VIR_FREE(ipaddr);
- if (rc < 0)
- goto no_memory;
+ char *bootserver = virSocketFormatAddr(&network->def->bootserver);
- APPEND_ARG(*argv, i++, "--dhcp-boot");
- APPEND_ARG_LIT(*argv, i++, boot);
+ if (!bootserver)
+ goto cleanup;
+ virCommandAddArgFormat(cmd, "%s%s%s",
+ network->def->bootfile, ",,", bootserver);
+ VIR_FREE(bootserver);
+ } else {
+ virCommandAddArg(cmd, network->def->bootfile);
+ }
}
-#undef APPEND_ARG
-
- return 0;
-
- no_memory:
- virReportOOMError();
- error:
- if (*argv) {
- for (i = 0; (*argv)[i]; i++)
- VIR_FREE((*argv)[i]);
- VIR_FREE(*argv);
- }
- return -1;
+ ret = 0;
+cleanup:
+ VIR_FREE(bridgeaddr);
+ return ret;
}
static int
dhcpStartDhcpDaemon(virNetworkObjPtr network)
{
- const char **argv;
- char *pidfile;
- int ret = -1, i, err;
+ virCommandPtr cmd = NULL;
+ char *pidfile = NULL;
+ int ret = -1, err;
network->dnsmasqPid = -1;
if (!VIR_SOCKET_IS_FAMILY(&network->def->ipAddress, AF_INET)) {
networkReportError(VIR_ERR_INTERNAL_ERROR,
"%s", _("cannot start dhcp daemon without IPv4 address for server"));
- return -1;
+ goto cleanup;
}
if ((err = virFileMakePath(NETWORK_PID_DIR)) != 0) {
virReportSystemError(err,
_("cannot create directory %s"),
NETWORK_PID_DIR);
- return -1;
+ goto cleanup;
}
if ((err = virFileMakePath(NETWORK_STATE_DIR)) != 0) {
virReportSystemError(err,
_("cannot create directory %s"),
NETWORK_STATE_DIR);
- return -1;
+ goto cleanup;
}
if (!(pidfile = virFilePid(NETWORK_PID_DIR, network->def->name))) {
virReportOOMError();
- return -1;
+ goto cleanup;
}
- argv = NULL;
- if (networkBuildDnsmasqArgv(network, pidfile, &argv) < 0) {
+ cmd = virCommandNew(DNSMASQ);
+ if (networkBuildDnsmasqArgv(network, pidfile, cmd) < 0) {
VIR_FREE(pidfile);
- return -1;
+ goto cleanup;
}
- if (virRun(argv, NULL) < 0)
+ if (virCommandRun(cmd, NULL) < 0)
goto cleanup;
/*
- * There really is no race here - when dnsmasq daemonizes,
- * its leader process stays around until its child has
- * actually written its pidfile. So by time virRun exits
- * it has waitpid'd and guaranteed the proess has started
- * and written a pid
+ * There really is no race here - when dnsmasq daemonizes, its
+ * leader process stays around until its child has actually
+ * written its pidfile. So by time virCommandRun exits it has
+ * waitpid'd and guaranteed the proess has started and written a
+ * pid
*/
if (virFileReadPid(NETWORK_PID_DIR, network->def->name,
@@ -656,13 +582,9 @@ dhcpStartDhcpDaemon(virNetworkObjPtr network)
goto cleanup;
ret = 0;
-
cleanup:
VIR_FREE(pidfile);
- for (i = 0; argv[i]; i++)
- VIR_FREE(argv[i]);
- VIR_FREE(argv);
-
+ virCommandFree(cmd);
return ret;
}
--
1.7.3.2
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list