On 10/20/2010 12:19 PM, Eric Blake wrote:
Complete patch is compressed and attached, because it is so large.
But the bulk of it consisted mainly of running 'git format-patch -15
b0137887' to pick up the top of my vcpu series, then replacing the
contents of docs/api_extension/ with the new patches.
The meat of the patch is the overview html file, copied here if you
don't want to unzip the attachment:
Some suggestions below.
2010-10-20 Eric Blake <eblake@xxxxxxxxxx>
docs: revamp api_extension example, using vcpu patch series
* docs/api_extension/*: Replace example files.
* docs/api_extension.html.in: Rewrite to match new example files.
diff --git c/docs/api_extension.html.in w/docs/api_extension.html.in
index de6eedc..1396e91 100644
--- c/docs/api_extension.html.in
+++ w/docs/api_extension.html.in
@@ -10,8 +10,12 @@
<p>
This document walks you through the process of implementing a new
- API in libvirt. It uses as an example the addition of the node
device
- create and destroy APIs.
+ API in libvirt. It uses as an example the addition of
... the addition of an API for separating maximum.. ?
+ separating maximum from current vcpu usage of a domain.
+ Remember that new API includes any new public functions, but it
that a new API
+ also includes addition of flags or extension of XML used through
may include addition of flags or extensions of XML used by
+ existing functions. The example in this document adds both
+ types of API, and not all extensions require quite as many
patches.
I'd make a new sentence after the comma.
Maybe: Also, not all libvirt extensions require quite as many patches.
</p>
<p>
@@ -23,7 +27,12 @@
added to libvirt. Someone may already be working on the
feature you
want. Also, recognize that everything you write is likely to
undergo
significant rework as you discuss it with the other developers, so
- don't wait too long before getting feedback.
+ don't wait too long before getting feedback. In the vcpu example
+ below, list feedback was first requested
+ <a
href="https://www.redhat.com/archives/libvir-list/2010-September/msg00423.html";>here</a>,
+ and resulted in several rounds of improvements before coding
+ began, and this example is slightly rearranged from the actual
+ order of the commits.
New sentence after the 'and'.
</p>
<p>
@@ -46,11 +55,22 @@
<li>define the public API</li>
<li>define the internal driver API</li>
<li>implement the public API</li>
- <li>define the wire protocol format</li>
- <li>implement the RPC client</li>
- <li>implement the server side dispatcher</li>
- <li>implement the driver methods</li>
+ <li>implement the remote protocol:
+ <ol>
+ <li>define the wire protocol format</li>
+ <li>implement the RPC client</li>
+ <li>implement the server side dispatcher</li>
+ </ol>
+ </li>
+ <li>use new API where appropriate in drivers</li>
<li>add virsh support</li>
+ <li>add common handling for new API</li>
+ <li>for each driver that can support the new API:
+ <ol>
+ <li>add prerequisite support</li>
+ <li>fully implement new API</li>
+ </ol>
+ </li>
</ol>
<p>
@@ -66,11 +86,10 @@
functionality--get the whole thing working and make sure you're
happy
with it. Then use git or some other version control system
that lets
you rewrite your commit history and break patches into pieces
so you
- don't drop a big blob of code on the mailing list at one go. For
- example, I didn't follow my own advice when I originally
submitted the
- example code to the libvirt list but rather submitted it in
several
- large chunks. I've used git's ability to rewrite my commit
history to
- break the code apart into the example patches shown.
+ don't drop a big blob of code on the mailing list at one go.
in one go
+ The example code used in this document was rebased several
+ times between the original list posting and the final committed
+ version.
I'd say that the implementer has to follow the tree and adapt the
patches as the tree changes.
</p>
<p>
@@ -86,9 +105,23 @@
<h2><a name='publicapi'>Defining the public API</a></h2>
- <p>The first task is to define the public API and add it to:</p>
+ <p>The first task is to define the public API. If the addition
If the extension requires a new XML, you must enhance the RelaxNG schema
and document the new elements or attributes.
+ involves XML, this includes enhancing the RelaxNG schema and
+ documenting the new elements or attributes:</p>
- <p><code>include/libvirt/libvirt.h.in</code></p>
+ <p><code>
+ docs/schemas/domain.rng<br/>
+ docs/formatdomain.html.in
+ </code></p>
+
+ <p>If the addition involves a new function, this involves adding
+ a declaration in the public header, and arranging to export the
+ symbol:</p>
Some how I don't like 'addition'. I'd say 'libvirt extension'.
If the extension adds a new function you have to add a declaration in
the public header file
as well as export the function name (symbol) so other programs can link
against the libvirt library and call your new function.
+
+ <p><code>
+ include/libvirt/libvirt.h.in
+ src/libvirt_public.syms
+ </code></p>
<p>
This task is in many ways the most important to get right,
since once
@@ -99,12 +132,9 @@
rework it as you go through the process of implementing it.
</p>
- <p>Once you have defined the API, you have to add the symbol names
to:</p>
-
- <p><code>src/libvirt_public.syms</code></p>
-
- <p class="example">See <a
href="api_extension/0001-Step-1-of-8-Define-the-public-API.patch">0001-Step-1-of-8-Define-the-public-API.patch</a>
for example code.</p>
-
+ <p class="example">See <a
href="api_extension/0001-Step-1-of-15-add-to-xml.patch">0001-Step-1-of-15-add-to-xml.patch</a>
+ and <a
href="api_extension/0002-Step-2-of-15-add-new-public-API.patch">0002-Step-2-of-15-add-new-public-API.patch</a>
+ for example code.</p>
<h2><a name='internalapi'>Defining the internal API</a></h2>
@@ -118,7 +148,7 @@
<p>
Of course, it's possible that the new API will involve the
creation of
- an entire new driver type, in which case the changes will
include the
+ an entirely new driver type, in which case the changes will
include the
creation of a new struct type to represent the new driver type.
</p>
@@ -129,10 +159,11 @@
<p>
To define the internal API, first typedef the driver function
prototype and then add a new field for it to the relevant driver
- struct.
+ struct. Then, update all existing instances of the driver to
+ provide a <code>NULL</code> stub for the new function.
</p>
- <p class="example">See <a
href="api_extension/0002-Step-2-of-8-Define-the-internal-driver-API.patch">0002-Step-2-of-8-Define-the-internal-driver-API.patch</a></p>
+ <p class="example">See <a
href="api_extension/0003-Step-3-of-15-define-internal-driver-API.patch">0003-Step-3-of-15-define-internal-driver-API.patch</a></p>
<h2><a name='implpublic'>Implementing the public API</a></h2>
@@ -166,16 +197,23 @@
<p><code>src/libvirt.c</code></p>
- <p class="example">See <a
href="api_extension/0003-Step-3-of-8-Implement-the-public-API.patch">0003-Step-3-of-8-Implement-the-public-API.patch</a></p>
+ <p class="example">See <a
href="api_extension/0004-Step-4-of-15-implement-the-public-APIs.patch">0004-Step-4-of-15-implement-the-public-APIs.patch</a></p>
+
+ <h2><a name='remoteproto'>Implementing the remote protocol</a></h2>
+
+ <p>
+ Implementing the remote protocol is essentially a
+ straightforward exercise which is probably most easily
+ understood by referring to the existing code and the example
+ patch. It involves several related changes, followed by
+ regenerating derived files.</p>
Not sure whether the reader will know what 'derived files' are.
+ <p class="example">See <a
href="api_extension/0005-Step-5-of-15-implement-the-remote-protocol.patch">0005-Step-5-of-15-implement-the-remote-protocol.patch</a></p>
- <h2><a name='wireproto'>Defining the wire protocol format</a></h2>
+ <h3><a name='wireproto'>Defining the wire protocol format</a></h3>
<p>
- Defining the wire protocol is essentially a straightforward
exercise
- which is probably most easily understood by referring to the
existing
- remote protocol wire format definitions and the example patch. It
- involves making two additions to:
+ Defining the wire protocol involves making additions to:
</p>
<p><code>src/remote/remote_protocol.x</code></p>
@@ -185,7 +223,7 @@
to the API. One struct describes the parameters to be passed
to the
remote function, and a second struct describes the value
returned by
the remote function. The one exception to this rule is that
functions
- that return only integer status do not require a struct for
returned
+ that return only 0 or -1 for status do not require a struct for
returned
data.
</p>
@@ -194,23 +232,19 @@
added to the API.
</p>
- <p class="example">See <a
href="api_extension/0004-Step-4-of-8-Define-the-wire-protocol-format.patch">0004-Step-4-of-8-Define-the-wire-protocol-format.patch</a></p>
-
<p>
Once these changes are in place, it's necessary to run 'make
rpcgen'
in the src directory to create the .c and .h files required by the
remote protocol code. This must be done on a Linux host using the
GLibC rpcgen program. Other rpcgen versions may generate code
which
- results in bogus compile time warnings
+ results in bogus compile time warnings.
</p>
-
- <h2><a name='rpcclient'>Implement the RPC client</a></h2>
+ <h3><a name='rpcclient'>Implement the RPC client</a></h3>
<p>
- Implementing the RPC client is also relatively mechanical, so
refer to
- the exising code and example patch for guidance. The RPC
client uses
- the rpcgen generated .h files. The remote method calls go in:
+ Implementing the uses the rpcgen generated .h files. The remote
+ method calls go in:
</p>
<p><code>src/remote/remote_internal.c</code></p>
@@ -227,17 +261,10 @@
<li>unlocks the remote driver.</li>
</ol>
- <p>
- Once you have created the remote method calls, you have to add
fields
- for them to the driver structs for the appropriate remote driver.
- </p>
-
- <p class="example">See <a
href="api_extension/0005-Step-5-of-8-Implement-the-RPC-client.patch">0005-Step-5-of-8-Implement-the-RPC-client.patch</a></p>
-
- <h2><a name="serverdispatch">Implement the server side
dispatcher</a></h2>
+ <h3><a name="serverdispatch">Implement the server side
dispatcher</a></h3>
<p>
- Implementing the server side of the remote function calls is
simply a
+ Implementing the server side of the remote function call is
simply a
matter of deserializing the parameters passed in from the remote
caller and passing them to the corresponding internal API
function.
The server side dispatchers are implemented in:
@@ -247,8 +274,65 @@
<p>Again, this step uses the .h files generated by make rpcgen.</p>
- <p class="example">See <a
href="api_extension/0006-Step-6-of-8-Implement-the-server-side-dispatcher.patch">0006-Step-6-of-8-Implement-the-server-side-dispatcher.patch</a></p>
+ <p>
+ After all three pieces of the remote protocol are complete, and
+ the generated files have been updated, it will be necessary to
+ update the file:</p>
+
+ <p><code>src/remote_protocol-structs</code></p>
+
+ <p>
+ This file should only have new lines added; modifications to
+ existing lines probably imply a backwards-incompatible API change.
+ </p>
+
+ <p class="example">See <a
href="api_extension/0005-Step-5-of-15-implement-the-remote-protocol.patch">0005-Step-5-of-15-implement-the-remote-protocol.patch</a></p>
+
+ <h2><a name="internaluseapi">Use the new API internally</a></h2>
+
+ <p>
+ Many times, a new API is merely an extension of existing
+ concepts that accomplished a subset of the same actions. When
This sound really abstract...
+ this is the case, it makes sense to share a common
+ implementation by making the older API become a trivial wrapper
+ around the new API, rather than duplicating the common code.
+ This step should not introduce any semantic differences for the
+ old API. This step is optional if the new API has no relation
+ to existing API.
is not necessary rather than 'optional'.
+ </p>
+
+ <p class="example">See <a
href="api_extension/0006-Step-6-of-15-make-old-API-trivially-wrap-to-new-API.patch">0006-Step-6-of-15-make-old-API-trivially-wrap-to-new-API.patch</a></p>
+
+ <h2><a name="virshuseapi">Expose the new API in virsh</a></h2>
+
+ <p>
+ All new API should be manageable from the virsh command line
APIs
+ shell. This proves that the API is sufficient for the purpose,
for the intended purpose
+ and makes it possible to identify if the proposed API needs slight
and helps to identify whether ...
+ changes for easier usage. However, remember that virsh is used
+ to connect to hosts running older versions of libvirtd, so the
s/so the new/so new/
+ new commands should have fallbacks to the older API when
to and older API if possible
+ possible; implementing the virsh hooks at this point makes it
+ very easy to test these fallbacks. Also remember to document
+ virsh additions.
It's a long way... :-)
Besides that they need to write test cases and extend the TCK test suite.
+ </p>
+
+ <p>
+ A virsh command is composed of a few pieces of code. You need to
+ define an array of vshCmdInfo structs for each new command that
+ contain the help text and the command description text. You
also need
+ an array of vshCmdOptDef structs to describe the command options.
+ Once you have those pieces of data in place you can write the
function
s/pieces of data/pieces/
+ implementing the virsh command. Finally, you need to add the new
+ command to the commands[] array. The following files need
changes:
+ </p>
+ <p><code>
+ tools/virsh.c<br/>
+ tools/virsh.pod
+ </code></p>
+
+ <p class="example">See <a
href="api_extension/0007-Step-7-of-15-add-virsh-support.patch">0007-Step-7-of-15-add-virsh-support.patch</a></p>
<h2><a name="driverimpl">Implement the driver methods</a></h2>
@@ -261,42 +345,72 @@
adding.
</p>
+ <h3><a name="commonimpl">Implement common handling</a></h3>
+
<p>
- In the example code, the extension is only an additional two
function
- calls in the node device API, so most of the new code is
additions to
- existing files. The only new files are there for multi-platform
- implementation convenience, as some of the new code is Linux
specific.
+ If the new API is applicable to more than one driver, it may
+ make sense to provide some utility routines, or to factor some
+ of the work into the dispatcher, to avoid reimplementing the
+ same code in every driver. In the example code, this involved
+ adding a member to the virDomainDefPtr struct for mapping
+ between the XML API addition and the in-memory representation of
+ a domain, along with updating all clients to use the new member.
+ Up to this point, there have been no changes to existing
+ semantics, and the new APIs will fail unless they are used in
+ the same way as the older API wrappers.
</p>
+ <p class="example">See <a
href="api_extension/0008-Step-8-of-15-support-new-xml.patch">0008-Step-8-of-15-support-new-xml.patch</a></p>
+
+ <h3><a name="drivercode">Implement driver handling</a></h3>
+
<p>
- The example code is probably uninteresting unless you're concerned
- with libvirt storage, but I've included it here to show how new
files
- are added to the build environment.
+ The remaining patches should only touch one driver at a time.
+ It is possible to implement all changes for a driver in one
+ patch, but for review purposes, it may still make sense to break
no comma after purposes?
+ things into simpler steps. Here is where the new APIs finally
+ start working.
</p>
- <p class="example">See <a
href="api_extension/0007-Step-7-of-8-Implement-the-driver-methods.patch">0007-Step-7-of-8-Implement-the-driver-methods.patch</a></p>
+ <p>
+ In the example patches, three separate drivers are supported:
+ test, qemu, and xen. It is always a good idea to patch the test
+ driver in addition to the target driver, to prove that the API
+ can be used for more than one driver. The example updates the
+ test driver in one patch:
+ </p>
- <h2><a name="virsh">Implement virsh commands</a></h2>
+ <p class="example">See <a
href="api_extension/0009-Step-9-of-15-support-all-flags-in-test-driver.patch">0009-Step-9-of-15-support-all-flags-in-test-driver.patch</a></p>
<p>
- Once you have the new functionality in place, the easiest way
to test
- it and also to provide it to end users is to implement support
for it
- in virsh.
+ The qemu changes were easier to split into two phases, one for
+ updating the mapping between the new XML and the hypervisor
+ command line arguments, and one for supporting all possible
+ flags of the new API:
</p>
+ <p class="example">See <a
href="api_extension/0010-Step-10-of-15-improve-vcpu-support-in-qemu-command-line.patch">0010-Step-10-of-15-improve-vcpu-support-in-qemu-command-line.patch</a>
+ and <a
href="api_extension/0011-Step-11-of-15-complete-vcpu-support-in-qemu-driver.patch">0011-Step-11-of-15-complete-vcpu-support-in-qemu-driver.patch</a></p>
+
<p>
- A virsh command is composed of a few pieces of code. You need to
- define an array of vshCmdInfo structs for each new command that
- contain the help text and the command description text. You
also need
- an array of vshCmdOptDef structs to describe the command options.
- Once you have those pieces of data in place you can write the
function
- implementing the virsh command. Finally, you need to add the new
- command to the commands[] array.
+ Finally, the example breaks the xen driver changes across four
+ patches, mapping the XML changes to the hypervisor command
patches. One maps the XML changes to the hypervisor command, other two
are independently implementing the getter and setter APIs and the last
one provides
cleanup of code that was rendered dead by the new API.
+ lines, implementing the getter API independently of the setter
+ API, and cleanup of up code rendered dead by the new API:
</p>
- <p class="example">See <a
href="api_extension/0008-Step-8-of-8-Add-virsh-support.patch">0008-Step-8-of-8-Add-virsh-support.patch</a></p>
+ <p class="example">See <a
href="api_extension/0012-Step-12-of-15-improve-vcpu-support-in-xen-command-line.patch">0012-Step-12-of-15-improve-vcpu-support-in-xen-command-line.patch</a>,
+ <a
href="api_extension/0013-Step-13-of-15-improve-support-for-getting-xen-vcpu-counts.patch">0013-Step-13-of-15-improve-support-for-getting-xen-vcpu-counts.patch</a>,
+ <a
href="api_extension/0014-Step-14-of-15-improve-support-for-setting-xen-vcpu-counts.patch">0014-Step-14-of-15-improve-support-for-setting-xen-vcpu-counts.patch</a>,
+ and <a
href="api_extension/0015-Step-15-of-15-remove-dead-xen-code.patch">0015-Step-15-of-15-remove-dead-xen-code.patch</a></p>
+
+ <p>
+ The exact details of the example code are probably uninteresting
+ unless you're concerned with virtual cpu management.
+ </p>
<p>Once you have working functionality, run make check and make
- syntax-check before generating patches.</p>
+ syntax-check on each patch of the series before submitting
+ patches.</p>
</body>
</html>
Regards,
Stefan
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list