The new _without_native knob makes it possible to skip the native build completely and build for MinGW only. Best viewed with 'git show -w'. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> --- libvirt.spec.in | 395 +++++++++++++++++++++++++----------------------- 1 file changed, 210 insertions(+), 185 deletions(-) diff --git a/libvirt.spec.in b/libvirt.spec.in index 7e2da8506a..361a34675b 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -203,6 +203,9 @@ %define qemu_moddir %{_libdir}/qemu %define qemu_datadir %{_datadir}/qemu +# Native / MinGW builds +%define with_native 0%{!?_without_native:1} + %define with_mingw32 0 %define with_mingw64 0 @@ -218,6 +221,13 @@ %define mingw_build_win64 %{with_mingw64} %endif +%if !%{with_native} + # Building the debugsource package apparently only works if the + # native build is enabled. debuginfo packages don't have this + # problem and setting this doesn't disable them + %global debug_package %{nil} +%endif + # RHEL releases provide stable tool chains and so it is safe to turn # compiler warning into errors without being worried about frequent # changes in reported warnings @@ -306,10 +316,11 @@ BuildRequires: systemd-rpm-macros BuildRequires: rpcgen # Fedora build root suckage BuildRequires: gawk +%if %{with_native} BuildRequires: gcc -%if %{with_libxl} + %if %{with_libxl} BuildRequires: xen-devel -%endif + %endif BuildRequires: glib2-devel >= 2.56 BuildRequires: libxml2-devel BuildRequires: readline-devel @@ -324,9 +335,9 @@ BuildRequires: augeas BuildRequires: systemd-devel >= 185 BuildRequires: libpciaccess-devel >= 0.10.9 BuildRequires: yajl-devel -%if %{with_sanlock} + %if %{with_sanlock} BuildRequires: sanlock-devel >= 2.4 -%endif + %endif BuildRequires: libpcap-devel >= 1.5.0 BuildRequires: libnl3-devel BuildRequires: libselinux-devel @@ -338,59 +349,59 @@ BuildRequires: cyrus-sasl-devel BuildRequires: polkit >= 0.112 # For mount/umount in FS driver BuildRequires: util-linux -%if %{with_qemu} + %if %{with_qemu} # For managing ACLs BuildRequires: libacl-devel # From QEMU RPMs, used by virstoragetest BuildRequires: /usr/bin/qemu-img -%endif + %endif # nbdkit support requires libnbd -%if %{with_nbdkit} + %if %{with_nbdkit} BuildRequires: libnbd-devel -%endif + %endif # For LVM drivers BuildRequires: lvm2 # For pool type=iscsi BuildRequires: iscsi-initiator-utils -%if %{with_storage_iscsi_direct} + %if %{with_storage_iscsi_direct} # For pool type=iscsi-direct BuildRequires: libiscsi-devel -%endif + %endif # For disk driver BuildRequires: parted-devel # For Multipath support BuildRequires: device-mapper-devel -%if %{with_storage_rbd} + %if %{with_storage_rbd} BuildRequires: librados-devel BuildRequires: librbd-devel -%endif -%if %{with_storage_gluster} + %endif + %if %{with_storage_gluster} BuildRequires: glusterfs-api-devel >= 3.4.1 BuildRequires: glusterfs-devel >= 3.4.1 -%endif -%if %{with_numactl} + %endif + %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: numactl-devel -%endif + %endif BuildRequires: libcap-ng-devel >= 0.5.0 -%if %{with_fuse} + %if %{with_fuse} BuildRequires: fuse-devel >= 2.8.6 -%endif -%if %{with_libssh2} + %endif + %if %{with_libssh2} BuildRequires: libssh2-devel >= 1.3.0 -%endif -%if %{with_netcf} + %endif + %if %{with_netcf} BuildRequires: netcf-devel >= 0.2.2 -%endif -%if 0%{?fedora} || 0%{?rhel} >= 9 + %endif + %if 0%{?fedora} || 0%{?rhel} >= 9 BuildRequires: passt -%endif -%if %{with_esx} + %endif + %if %{with_esx} BuildRequires: libcurl-devel -%endif -%if %{with_hyperv} + %endif + %if %{with_hyperv} BuildRequires: libwsman-devel >= 2.6.3 -%endif + %endif BuildRequires: audit-libs-devel # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel @@ -400,19 +411,20 @@ BuildRequires: util-linux BuildRequires: nfs-utils # For storage wiping with different algorithms BuildRequires: scrub -%if %{with_numad} + %if %{with_numad} BuildRequires: numad -%endif -%if %{with_wireshark} + %endif + %if %{with_wireshark} BuildRequires: wireshark-devel -%endif -%if %{with_libssh} + %endif + %if %{with_libssh} BuildRequires: libssh-devel >= 0.8.1 -%endif + %endif BuildRequires: libtirpc-devel + %if %{with_firewalld_zone} # Needed for the firewalld_reload macro -%if %{with_firewalld_zone} BuildRequires: firewalld-filesystem + %endif %endif %if %{with_mingw32} @@ -451,6 +463,7 @@ Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. +%if %{with_native} %package docs Summary: API reference and website documentation @@ -490,10 +503,10 @@ Requires: iproute # for /sbin/tc Requires: iproute-tc Requires: polkit >= 0.112 -%if %{with_dmidecode} + %if %{with_dmidecode} # For virConnectGetSysinfo Requires: dmidecode -%endif + %endif # For service management Requires(posttrans): /usr/bin/systemctl Requires(preun): /usr/bin/systemctl @@ -502,11 +515,11 @@ Requires: dbus # For uid creation during pre Requires(pre): shadow-utils # Needed by /usr/libexec/libvirt-guests.sh script. -%if 0%{?fedora} + %if 0%{?fedora} Requires: gettext-runtime -%else + %else Requires: gettext -%endif + %endif # Ensure smooth upgrades Obsoletes: libvirt-admin < 7.3.0 @@ -614,9 +627,9 @@ capabilities. Summary: Interface driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} -%if %{with_netcf} + %if %{with_netcf} Requires: netcf-libs >= 0.2.2 -%endif + %endif %description daemon-driver-interface The interface driver plugin for the libvirtd daemon, providing @@ -638,13 +651,13 @@ Requires: libvirt-libs = %{version}-%{release} Requires: nfs-utils # For mkfs Requires: util-linux -%if %{with_qemu} + %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img -%endif -%if !%{with_storage_rbd} + %endif + %if !%{with_storage_rbd} Obsoletes: libvirt-daemon-driver-storage-rbd < 5.2.0 -%endif + %endif Obsoletes: libvirt-daemon-driver-storage-sheepdog < 8.8.0 %description daemon-driver-storage-core @@ -692,7 +705,7 @@ Requires: iscsi-initiator-utils The storage driver backend adding implementation of the storage APIs for iscsi volumes using the host iscsi stack. -%if %{with_storage_iscsi_direct} + %if %{with_storage_iscsi_direct} %package daemon-driver-storage-iscsi-direct Summary: Storage driver plugin for iscsi-direct Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} @@ -701,7 +714,7 @@ Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-iscsi-direct The storage driver backend adding implementation of the storage APIs for iscsi volumes using libiscsi direct connection. -%endif + %endif %package daemon-driver-storage-mpath Summary: Storage driver plugin for multipath volumes @@ -713,24 +726,24 @@ Requires: device-mapper The storage driver backend adding implementation of the storage APIs for multipath storage using device mapper. -%if %{with_storage_gluster} + %if %{with_storage_gluster} %package daemon-driver-storage-gluster Summary: Storage driver plugin for gluster Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} - %if 0%{?fedora} + %if 0%{?fedora} Requires: glusterfs-client >= 2.0.1 - %endif - %if 0%{?fedora} || 0%{?with_storage_gluster} + %endif + %if 0%{?fedora} || 0%{?with_storage_gluster} Requires: /usr/sbin/gluster - %endif + %endif %description daemon-driver-storage-gluster The storage driver backend adding implementation of the storage APIs for gluster volumes using libgfapi. -%endif + %endif -%if %{with_storage_rbd} + %if %{with_storage_rbd} %package daemon-driver-storage-rbd Summary: Storage driver plugin for rbd Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} @@ -739,9 +752,9 @@ Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-rbd The storage driver backend adding implementation of the storage APIs for rbd volumes using the ceph protocol. -%endif + %endif -%if %{with_storage_zfs} + %if %{with_storage_zfs} %package daemon-driver-storage-zfs Summary: Storage driver plugin for ZFS Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} @@ -753,7 +766,7 @@ Requires: /sbin/zpool %description daemon-driver-storage-zfs The storage driver backend adding implementation of the storage APIs for ZFS volumes. -%endif + %endif %package daemon-driver-storage Summary: Storage driver plugin including all backends for the libvirtd daemon @@ -763,25 +776,25 @@ Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release} Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release} -%if %{with_storage_iscsi_direct} + %if %{with_storage_iscsi_direct} Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release} -%endif -%if %{with_storage_gluster} + %endif + %if %{with_storage_gluster} Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release} -%endif -%if %{with_storage_rbd} + %endif + %if %{with_storage_rbd} Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release} -%endif -%if %{with_storage_zfs} + %endif + %if %{with_storage_zfs} Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release} -%endif + %endif %description daemon-driver-storage The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using LVM, iSCSI, parted and more. -%if %{with_qemu} + %if %{with_qemu} %package daemon-driver-qemu Summary: QEMU driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} @@ -795,26 +808,26 @@ Requires: lzop Requires: xz Requires: systemd-container Requires: swtpm-tools - %if %{with_numad} + %if %{with_numad} Requires: numad - %endif - %if 0%{?fedora} || 0%{?rhel} >= 9 + %endif + %if 0%{?fedora} || 0%{?rhel} >= 9 Recommends: passt Recommends: passt-selinux - %endif - %if %{with_nbdkit} + %endif + %if %{with_nbdkit} Recommends: nbdkit Recommends: nbdkit-curl-plugin Recommends: nbdkit-ssh-plugin - %endif + %endif %description daemon-driver-qemu The qemu driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using QEMU -%endif + %endif -%if %{with_lxc} + %if %{with_lxc} %package daemon-driver-lxc Summary: LXC driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} @@ -824,17 +837,17 @@ Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: systemd-container # for modprobe of nbd driver Requires: module-init-tools - %if %{with_numad} + %if %{with_numad} Requires: numad - %endif + %endif %description daemon-driver-lxc The LXC driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using the Linux kernel -%endif + %endif -%if %{with_vbox} + %if %{with_vbox} %package daemon-driver-vbox Summary: VirtualBox driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} @@ -844,9 +857,9 @@ Requires: libvirt-libs = %{version}-%{release} The vbox driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using VirtualBox -%endif + %endif -%if %{with_libxl} + %if %{with_libxl} %package daemon-driver-libxl Summary: Libxl driver plugin for the libvirtd daemon Requires: libvirt-daemon-common = %{version}-%{release} @@ -857,22 +870,22 @@ Obsoletes: libvirt-daemon-driver-xen < 4.3.0 The Libxl driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Libxl -%endif + %endif -%if %{with_qemu_tcg} + %if %{with_qemu_tcg} %package daemon-qemu Summary: Server side daemon & driver required to run QEMU guests - %if %{with_modular_daemons} + %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-log = %{version}-%{release} Requires: libvirt-daemon-lock = %{version}-%{release} Requires: libvirt-daemon-plugin-lockd = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} Recommends: libvirt-daemon = %{version}-%{release} - %else + %else Requires: libvirt-daemon = %{version}-%{release} - %endif + %endif Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} @@ -885,22 +898,22 @@ Requires: qemu %description daemon-qemu Server side daemon and driver required to manage the virtualization capabilities of the QEMU TCG emulators -%endif + %endif -%if %{with_qemu_kvm} + %if %{with_qemu_kvm} %package daemon-kvm Summary: Server side daemon & driver required to run KVM guests - %if %{with_modular_daemons} + %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-log = %{version}-%{release} Requires: libvirt-daemon-lock = %{version}-%{release} Requires: libvirt-daemon-plugin-lockd = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} Recommends: libvirt-daemon = %{version}-%{release} - %else + %else Requires: libvirt-daemon = %{version}-%{release} - %endif + %endif Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} @@ -913,19 +926,19 @@ Requires: qemu-kvm %description daemon-kvm Server side daemon and driver required to manage the virtualization capabilities of the KVM hypervisor -%endif + %endif -%if %{with_lxc} + %if %{with_lxc} %package daemon-lxc Summary: Server side daemon & driver required to run LXC guests - %if %{with_modular_daemons} + %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} Recommends: libvirt-daemon = %{version}-%{release} - %else + %else Requires: libvirt-daemon = %{version}-%{release} - %endif + %endif Requires: libvirt-daemon-driver-lxc = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} @@ -937,21 +950,21 @@ Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-lxc Server side daemon and driver required to manage the virtualization capabilities of LXC -%endif + %endif -%if %{with_libxl} + %if %{with_libxl} %package daemon-xen Summary: Server side daemon & driver required to run XEN guests - %if %{with_modular_daemons} + %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-lock = %{version}-%{release} Requires: libvirt-daemon-plugin-lockd = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} Recommends: libvirt-daemon = %{version}-%{release} - %else + %else Requires: libvirt-daemon = %{version}-%{release} - %endif + %endif Requires: libvirt-daemon-driver-libxl = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} @@ -964,19 +977,19 @@ Requires: xen %description daemon-xen Server side daemon and driver required to manage the virtualization capabilities of XEN -%endif + %endif -%if %{with_vbox} + %if %{with_vbox} %package daemon-vbox Summary: Server side daemon & driver required to run VirtualBox guests - %if %{with_modular_daemons} + %if %{with_modular_daemons} Requires: libvirt-daemon-common = %{version}-%{release} Requires: libvirt-daemon-proxy = %{version}-%{release} Recommends: libvirt-daemon = %{version}-%{release} - %else + %else Requires: libvirt-daemon = %{version}-%{release} - %endif + %endif Requires: libvirt-daemon-driver-vbox = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} @@ -988,7 +1001,7 @@ Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-vbox Server side daemon and driver required to manage the virtualization capabilities of VirtualBox -%endif + %endif %package client Summary: Client side utilities of the libvirt library @@ -1025,7 +1038,7 @@ Requires: cyrus-sasl-gssapi %description libs Shared libraries for accessing the libvirt daemon. -%if %{with_wireshark} + %if %{with_wireshark} %package wireshark Summary: Wireshark dissector plugin for libvirt RPC transactions Requires: wireshark @@ -1033,9 +1046,9 @@ Requires: libvirt-libs = %{version}-%{release} %description wireshark Wireshark dissector plugin for better analysis of libvirt RPC traffic. -%endif + %endif -%if %{with_lxc} + %if %{with_lxc} %package login-shell Summary: Login shell for connecting users to an LXC container Requires: libvirt-libs = %{version}-%{release} @@ -1044,7 +1057,7 @@ Requires: libvirt-libs = %{version}-%{release} Provides the set-uid virt-login-shell binary that is used to connect a user to an LXC container when they login, by switching namespaces. -%endif + %endif %package devel Summary: Libraries, includes, etc. to compile with the libvirt library @@ -1054,7 +1067,7 @@ Requires: pkgconfig %description devel Include header files & development libraries for the libvirt C library. -%if %{with_sanlock} + %if %{with_sanlock} %package daemon-plugin-sanlock Summary: Sanlock lock manager plugin for QEMU driver Requires: sanlock >= 2.4 @@ -1067,7 +1080,7 @@ Provides: libvirt-lock-sanlock = %{version}-%{release} %description daemon-plugin-sanlock Includes the Sanlock lock manager plugin for the QEMU driver -%endif + %endif %package nss Summary: Libvirt plugin for Name Service Switch @@ -1075,6 +1088,7 @@ Requires: libvirt-daemon-driver-network = %{version}-%{release} %description nss Libvirt plugin for NSS for translating domain names into IP addresses. +%endif %if %{with_mingw32} %package -n mingw32-libvirt @@ -1266,6 +1280,7 @@ exit 1 export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/libvirt.spec) +%if %{with_native} %meson \ -Drunstatedir=%{_rundir} \ -Dinitconfdir=%{_sysconfdir}/sysconfig \ @@ -1341,6 +1356,7 @@ export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/libvirt.spec) %{?arg_login_shell} %meson_build +%endif %if %{with_mingw32} || %{with_mingw64} %mingw_meson \ @@ -1417,7 +1433,7 @@ export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/libvirt.spec) -Dudev=disabled \ -Dwireshark_dissector=disabled \ -Dyajl=disabled -%mingw_ninja + %mingw_ninja %endif %install @@ -1425,6 +1441,7 @@ rm -fr %{buildroot} export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/libvirt.spec) +%if %{with_native} %meson_install # We don't want to install /etc/libvirt/qemu/networks in the main %%files list @@ -1444,47 +1461,48 @@ cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \ # libvirt saves these files with mode 600 chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml -%if ! %{with_qemu} + %if ! %{with_qemu} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug -%endif + %endif %find_lang %{name} -%if ! %{with_sanlock} + %if ! %{with_sanlock} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug -%endif + %endif -%if ! %{with_lxc} + %if ! %{with_lxc} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug -%endif + %endif -%if ! %{with_qemu} + %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu -%endif -%if ! %{with_lxc} + %endif + %if ! %{with_lxc} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc -%endif -%if ! %{with_libxl} + %endif + %if ! %{with_libxl} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug -%endif + %endif # Copied into libvirt-docs subpackage eventually mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs -%ifarch %{arches_systemtap_64bit} + %ifarch %{arches_systemtap_64bit} mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp - %if %{with_qemu} + %if %{with_qemu} mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp + %endif %endif %endif @@ -1516,9 +1534,12 @@ rm -rf $RPM_BUILD_ROOT%{mingw64_libexecdir}/libvirt-guests.sh %endif %check + +%if %{with_native} # Building on slow archs, like emulated s390x in Fedora copr, requires # raising the test timeout VIR_TEST_DEBUG=1 %meson_test --no-suite syntax-check --timeout-multiplier 10 +%endif %define libvirt_rpmstatedir %{_localstatedir}/lib/rpm-state/libvirt @@ -1664,6 +1685,7 @@ VIR_TEST_DEBUG=1 %meson_test --no-suite syntax-check --timeout-multiplier 10 %define libvirt_systemd_config_pre() %libvirt_systemd_schedule_restart %1.service %define libvirt_systemd_config_posttrans() %libvirt_systemd_perform_restart %1.service +%if %{with_native} %pre daemon %libvirt_sysconfig_pre libvirtd %libvirt_systemd_inet_pre libvirtd @@ -1728,9 +1750,9 @@ exit 0 %libvirt_systemd_unix_pre virtnetworkd %post daemon-driver-network -%if %{with_firewalld_zone} + %if %{with_firewalld_zone} %firewalld_reload -%endif + %endif %posttrans daemon-driver-network %libvirt_sysconfig_posttrans virtnetworkd @@ -1740,9 +1762,9 @@ exit 0 %libvirt_systemd_unix_preun virtnetworkd %postun daemon-driver-network -%if %{with_firewalld_zone} + %if %{with_firewalld_zone} %firewalld_reload -%endif + %endif %pre daemon-driver-nwfilter %libvirt_sysconfig_pre virtnwfilterd @@ -1799,7 +1821,7 @@ exit 0 %preun daemon-driver-storage-core %libvirt_systemd_unix_preun virtstoraged -%if %{with_qemu} + %if %{with_qemu} %pre daemon-driver-qemu %libvirt_sysconfig_pre virtqemud %libvirt_systemd_unix_pre virtqemud @@ -1823,9 +1845,9 @@ exit 0 %preun daemon-driver-qemu %libvirt_systemd_unix_preun virtqemud -%endif + %endif -%if %{with_lxc} + %if %{with_lxc} %pre daemon-driver-lxc %libvirt_sysconfig_pre virtlxcd %libvirt_systemd_unix_pre virtlxcd @@ -1836,9 +1858,9 @@ exit 0 %preun daemon-driver-lxc %libvirt_systemd_unix_preun virtlxcd -%endif + %endif -%if %{with_vbox} + %if %{with_vbox} %pre daemon-driver-vbox %libvirt_sysconfig_pre virtvboxd %libvirt_systemd_unix_pre virtvboxd @@ -1849,9 +1871,9 @@ exit 0 %preun daemon-driver-vbox %libvirt_systemd_unix_preun virtvboxd -%endif + %endif -%if %{with_libxl} + %if %{with_libxl} %pre daemon-driver-libxl %libvirt_sysconfig_pre virtxend %libvirt_systemd_unix_pre virtxend @@ -1862,7 +1884,7 @@ exit 0 %preun daemon-driver-libxl %libvirt_systemd_unix_preun virtxend -%endif + %endif %pre daemon-config-network %libvirt_systemd_config_pre libvirtd @@ -1927,12 +1949,14 @@ done %libvirt_systemd_config_posttrans libvirtd %libvirt_systemd_config_posttrans virtnwfilterd -%if %{with_lxc} + %if %{with_lxc} %pre login-shell getent group virtlogin >/dev/null || groupadd -r virtlogin exit 0 + %endif %endif +%if %{with_native} %files %files docs @@ -1993,9 +2017,9 @@ exit 0 %{_datadir}/augeas/lenses/virtlockd.aug %{_datadir}/augeas/lenses/tests/test_virtlockd.aug %{_datadir}/augeas/lenses/libvirt_lockd.aug -%if %{with_qemu} + %if %{with_qemu} %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug -%endif + %endif %attr(0755, root, root) %{_sbindir}/virtlockd %{_mandir}/man8/virtlockd.8* @@ -2068,13 +2092,13 @@ exit 0 %attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper %{_libdir}/libvirt/connection-driver/libvirt_driver_network.so %{_mandir}/man8/virtnetworkd.8* -%if %{with_firewalld_zone} + %if %{with_firewalld_zone} %{_prefix}/lib/firewalld/zones/libvirt.xml %{_prefix}/lib/firewalld/zones/libvirt-routed.xml %{_prefix}/lib/firewalld/policies/libvirt-routed-in.xml %{_prefix}/lib/firewalld/policies/libvirt-routed-out.xml %{_prefix}/lib/firewalld/policies/libvirt-to-host.xml -%endif + %endif %files daemon-driver-nodedev %config(noreplace) %{_sysconfdir}/libvirt/virtnodedevd.conf @@ -2151,31 +2175,31 @@ exit 0 %files daemon-driver-storage-iscsi %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_iscsi.so -%if %{with_storage_iscsi_direct} + %if %{with_storage_iscsi_direct} %files daemon-driver-storage-iscsi-direct %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_iscsi-direct.so -%endif + %endif %files daemon-driver-storage-mpath %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_mpath.so -%if %{with_storage_gluster} + %if %{with_storage_gluster} %files daemon-driver-storage-gluster %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_gluster.so %{_libdir}/libvirt/storage-file/libvirt_storage_file_gluster.so -%endif + %endif -%if %{with_storage_rbd} + %if %{with_storage_rbd} %files daemon-driver-storage-rbd %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_rbd.so -%endif + %endif -%if %{with_storage_zfs} + %if %{with_storage_zfs} %files daemon-driver-storage-zfs %{_libdir}/libvirt/storage-backend/libvirt_storage_backend_zfs.so -%endif + %endif -%if %{with_qemu} + %if %{with_qemu} %files daemon-driver-qemu %config(noreplace) %{_sysconfdir}/libvirt/virtqemud.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-qemu-postcopy-migration.conf @@ -2213,9 +2237,9 @@ exit 0 %{_bindir}/virt-qemu-run %{_mandir}/man1/virt-qemu-run.1* %{_mandir}/man8/virtqemud.8* -%endif + %endif -%if %{with_lxc} + %if %{with_lxc} %files daemon-driver-lxc %config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf %{_datadir}/augeas/lenses/virtlxcd.aug @@ -2237,9 +2261,9 @@ exit 0 %attr(0755, root, root) %{_libexecdir}/libvirt_lxc %{_libdir}/libvirt/connection-driver/libvirt_driver_lxc.so %{_mandir}/man8/virtlxcd.8* -%endif + %endif -%if %{with_libxl} + %if %{with_libxl} %files daemon-driver-libxl %config(noreplace) %{_sysconfdir}/libvirt/virtxend.conf %{_datadir}/augeas/lenses/virtxend.aug @@ -2265,9 +2289,9 @@ exit 0 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/save/ %{_libdir}/libvirt/connection-driver/libvirt_driver_libxl.so %{_mandir}/man8/virtxend.8* -%endif + %endif -%if %{with_vbox} + %if %{with_vbox} %files daemon-driver-vbox %config(noreplace) %{_sysconfdir}/libvirt/virtvboxd.conf %{_datadir}/augeas/lenses/virtvboxd.aug @@ -2279,36 +2303,36 @@ exit 0 %attr(0755, root, root) %{_sbindir}/virtvboxd %{_libdir}/libvirt/connection-driver/libvirt_driver_vbox.so %{_mandir}/man8/virtvboxd.8* -%endif + %endif -%if %{with_qemu_tcg} + %if %{with_qemu_tcg} %files daemon-qemu -%endif + %endif -%if %{with_qemu_kvm} + %if %{with_qemu_kvm} %files daemon-kvm -%endif + %endif -%if %{with_lxc} + %if %{with_lxc} %files daemon-lxc -%endif + %endif -%if %{with_libxl} + %if %{with_libxl} %files daemon-xen -%endif + %endif -%if %{with_vbox} + %if %{with_vbox} %files daemon-vbox -%endif + %endif -%if %{with_sanlock} + %if %{with_sanlock} %files daemon-plugin-sanlock - %if %{with_qemu} + %if %{with_qemu} %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf - %endif - %if %{with_libxl} + %endif + %if %{with_libxl} %config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf - %endif + %endif %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/ %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so %{_datadir}/augeas/lenses/libvirt_sanlock.aug @@ -2317,7 +2341,7 @@ exit 0 %{_sbindir}/virt-sanlock-cleanup %{_mandir}/man8/virt-sanlock-cleanup.8* %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper -%endif + %endif %files client %{_mandir}/man1/virsh.1* @@ -2331,13 +2355,13 @@ exit 0 %{_bindir}/virt-pki-validate %{_datadir}/bash-completion/completions/virsh -%if %{with_qemu} + %if %{with_qemu} %files client-qemu %{_mandir}/man1/virt-qemu-qmp-proxy.1* %{_mandir}/man1/virt-qemu-sev-validate.1* %{_bindir}/virt-qemu-qmp-proxy %{_bindir}/virt-qemu-sev-validate -%endif + %endif %files libs -f %{name}.lang %license COPYING COPYING.LESSER @@ -2352,29 +2376,29 @@ exit 0 %dir %{_datadir}/libvirt/schemas/ %{_datadir}/systemtap/tapset/libvirt_probes*.stp %{_datadir}/systemtap/tapset/libvirt_functions.stp -%if %{with_qemu} + %if %{with_qemu} %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp -%endif + %endif %{_datadir}/libvirt/schemas/*.rng %{_datadir}/libvirt/cpu_map/*.xml %{_datadir}/libvirt/test-screenshot.png -%if %{with_wireshark} + %if %{with_wireshark} %files wireshark %{wireshark_plugindir}/libvirt.so -%endif + %endif %files nss %{_libdir}/libnss_libvirt.so.2 %{_libdir}/libnss_libvirt_guest.so.2 -%if %{with_lxc} + %if %{with_lxc} %files login-shell %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell %{_libexecdir}/virt-login-shell-helper %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf %{_mandir}/man1/virt-login-shell.1* -%endif + %endif %files devel %{_libdir}/libvirt.so @@ -2409,6 +2433,7 @@ exit 0 %{_datadir}/libvirt/api/libvirt-admin-api.xml %{_datadir}/libvirt/api/libvirt-qemu-api.xml %{_datadir}/libvirt/api/libvirt-lxc-api.xml +%endif %if %{with_mingw32} %files -n mingw32-libvirt -f mingw32-libvirt.lang -- 2.41.0 _______________________________________________ Devel mailing list -- devel@xxxxxxxxxxxxxxxxx To unsubscribe send an email to devel-leave@xxxxxxxxxxxxxxxxx