[PATCH v3] travis: switch to using Ubuntu 16.04 and 18.04

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The container images provided by Travis only support Ubuntu 14.04,
however, Travis has ability to run docker, which allows the build
script to use arbitrary OS images. This takes advantage of that to
convert the build over to Ubuntu 16.04 and 18.04

This is using the official Ubuntu provided images and installing
extra build deps required, as we previously did with Travis container
images. With the switch to Docker though, this can be improved, by
building custom Docker images with all the deps pre-installed which
will cut down build time. This can be driven from the package lists
in libvirt-jenkins-ci repo, to remove the duplication. This work
for future improvement though, this just does the minimal conversion
to match what we already do, but with newer distro.

Signed-off-by: Daniel P. Berrangé <berrange@xxxxxxxxxx>
---
 .travis.yml | 214 +++++++++++++++++++++++++++++-----------------------
 1 file changed, 118 insertions(+), 96 deletions(-)

diff --git a/.travis.yml b/.travis.yml
index c71411dcae..771cd93604 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -1,6 +1,5 @@
-sudo: false
-language: c
-cache: ccache
+sudo: required
+language: generic
 
 branches:
   except:
@@ -8,17 +7,38 @@ branches:
 
 matrix:
   include:
-    - compiler: gcc
-      dist: trusty
+    - services:
+        - docker
       env:
-        - PYTHON=$(which python2)
-        - DISTCHECK_CONFIGURE_FLAGS="--with-init-script=upstart"
-    - compiler: clang
-      dist: trusty
-      env:
-        - PYTHON=$(which python3)
+        - IMAGE=ubuntu:18.04
         - DISTCHECK_CONFIGURE_FLAGS="--with-init-script=systemd"
+      script:
+        - docker run
+            --privileged
+            -v $(pwd):/build
+            -w /build
+            -e VIR_TEST_DEBUG="$VIR_TEST_DEBUG"
+            -e PACKAGES="$PACKAGES"
+            -e DISTCHECK_CONFIGURE_FLAGS="$DISTCHECK_CONFIGURE_FLAGS"
+            "$IMAGE"
+            /bin/sh -xc "$DOCKER_CMD"
+    - services:
+        - docker
+      env:
+        - IMAGE=ubuntu:16.04
+        - DISTCHECK_CONFIGURE_FLAGS="--with-init-script=upstart"
+      script:
+        - docker run
+            --privileged
+            -v $(pwd):/build
+            -w /build
+            -e VIR_TEST_DEBUG="$VIR_TEST_DEBUG"
+            -e PACKAGES="$PACKAGES"
+            -e DISTCHECK_CONFIGURE_FLAGS="$DISTCHECK_CONFIGURE_FLAGS"
+            "$IMAGE"
+            /bin/sh -xc "$DOCKER_CMD"
     - compiler: clang
+      language: c
       os: osx
       env:
         - PATH="/usr/local/opt/gettext/bin:/usr/local/opt/ccache/libexec:/usr/local/opt/rpcgen/bin:$PATH"
@@ -27,80 +47,18 @@ matrix:
         - brew update
         - brew upgrade
         - brew install python ccache rpcgen yajl
+      before_script:
+        - ./autogen.sh --prefix=$(pwd)/install-root
       script:
         # We can't run make distcheck/syntax-check because they
         # fail on macOS, but doing 'install' and 'dist' gives us
         # some useful coverage
         - make -j3 && make -j3 install && make -j3 dist
+      after_failure:
+        - echo '=== LOG FILE(S) START ==='
+        - find -name test-suite.log | xargs cat
+        - echo '=== LOG FILE(S) END ==='
 
-addons:
-  apt:
-    # Please keep this list sorted alphabetically
-    packages:
-      - augeas-tools
-      - autoconf
-      - automake
-      - autopoint
-      - bash-completion
-      - ccache
-      - dnsmasq-base
-      - dwarves
-      - ebtables
-      - gcc
-      - gettext
-      - glusterfs-client
-      - libacl1-dev
-      - libapparmor-dev
-      - libattr1-dev
-      - libaudit-dev
-      - libavahi-client-dev
-      - libblkid-dev
-      - libc6-dev
-      - libcap-ng-dev
-      - libc-dev-bin
-      - libcurl4-gnutls-dev
-      - libdbus-1-dev
-      - libdevmapper-dev
-      - libfuse-dev
-      - libgnutls-dev
-      - libnetcf-dev
-      - libnl-3-dev
-      - libnl-route-3-dev
-      - libnuma-dev
-      - libopenwsman-dev
-      - libparted-dev
-      - libpcap-dev
-      - libpciaccess-dev
-      - librbd-dev
-      - libreadline-dev
-      - libsanlock-dev
-      - libsasl2-dev
-      - libselinux1-dev
-      - libssh2-1-dev
-      - libssh-dev
-      - libtirpc-dev
-      - libtool
-      - libudev-dev
-      - libxen-dev
-      - libxml2-dev
-      - libxml2-utils
-      - libyajl-dev
-      - lvm2
-      - make
-#     - nfs-common    # broken on trusty since build #807 (2018-01-09)
-      - open-iscsi
-      - parted
-      - patch
-      - perl
-      - pkgconf
-      - policykit-1
-      - qemu-utils
-      - radvd
-      - scrub
-      - sheepdog
-      - systemtap-sdt-dev
-      - xsltproc
-      - zfs-fuse
 
 git:
   submodules: true
@@ -108,23 +66,87 @@ git:
 env:
   global:
     - VIR_TEST_DEBUG=1
-
-before_script:
-  - ./autogen.sh --prefix=$(pwd)/install-root
-
-script:
-  - make -j3 && make -j3 syntax-check && make -j3 distcheck DISTCHECK_CONFIGURE_FLAGS=$DISTCHECK_CONFIGURE_FLAGS
-
-after_failure:
-  - echo '============================================================================'
-  - 'ver=$(sed -n "s/AC_INIT(\[libvirt\], \[\([0-9.]*\)\],.*/\1/p" configure.ac);
-    if [ -f $(pwd)/tests/test-suite.log ]; then
-        cat $(pwd)/tests/test-suite.log;
-    elif [ -f libvirt-$ver/_build/tests/test-suite.log ]; then
-        cat libvirt-$ver/_build/tests/test-suite.log;
-    else
-        echo "=== NO LOG FILE FOUND ===";
-    fi'
+    - DOCKER_CMD="
+        apt-get update &&
+        apt-get install -y \$PACKAGES &&
+        ./autogen.sh &&
+        make -j3 &&
+        make -j3 syntax-check &&
+        make -j3 distcheck DISTCHECK_CONFIGURE_FLAGS=\"\$DISTCHECK_CONFIGURE_FLAGS\" ||
+        (
+          echo '=== LOG FILE(S) START ==='
+          find -name test-suite.log | xargs cat
+          echo '=== LOG FILE(S) END ==='
+          exit 1
+        )
+      "
+    # Please keep this list sorted alphabetically
+    - PACKAGES="
+        augeas-tools
+        autoconf
+        automake
+        autopoint
+        bash-completion
+        ccache
+        dnsmasq-base
+        dwarves
+        ebtables
+        gcc
+        gettext
+        git
+        glusterfs-client
+        libacl1-dev
+        libapparmor-dev
+        libattr1-dev
+        libaudit-dev
+        libavahi-client-dev
+        libblkid-dev
+        libc6-dev
+        libcap-ng-dev
+        libc-dev-bin
+        libdbus-1-dev
+        libdevmapper-dev
+        libfuse-dev
+        libgnutls28-dev
+        libnetcf-dev
+        libnl-3-dev
+        libnl-route-3-dev
+        libnuma-dev
+        libopenwsman-dev
+        libparted-dev
+        libpcap-dev
+        libpciaccess-dev
+        librbd-dev
+        libreadline-dev
+        libsanlock-dev
+        libsasl2-dev
+        libselinux1-dev
+        libssh2-1-dev
+        libssh-dev
+        libtirpc-dev
+        libtool
+        libudev-dev
+        libxen-dev
+        libxml2-dev
+        libxml2-utils
+        libyajl-dev
+        lvm2
+        make
+        nfs-common
+        open-iscsi
+        parted
+        patch
+        perl
+        pkgconf
+        policykit-1
+        qemu-utils
+        radvd
+        scrub
+        sheepdog
+        systemtap-sdt-dev
+        xsltproc
+        zfs-fuse
+      "
 
 notifications:
   irc:
-- 
2.17.0

--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list




[Index of Archives]     [Virt Tools]     [Libvirt Users]     [Lib OS Info]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux