Remove the qmpOnly attribute of virQEMUCapsNewForBinaryInternal
and instead always assume it's true.
This effectively sets the minimum QEMU version to 1.2.0,
breaking support for QEMU in RHEL6.
Signed-off-by: Ján Tomko <jtomko@xxxxxxxxxx>
---
cfg.mk | 2 +-
src/qemu/qemu_capabilities.c | 866 +-----------------------------
src/qemu/qemu_capspriv.h | 17 +-
tests/Makefile.am | 8 +-
tests/qemucapsprobe.c | 2 +-
tests/qemuhelpdata/qemu-0.12.1 | 198 -------
tests/qemuhelpdata/qemu-0.12.1-device | 62 ---
tests/qemuhelpdata/qemu-1.0 | 253 ---------
tests/qemuhelpdata/qemu-1.0-device | 148 -----
tests/qemuhelpdata/qemu-1.1.0 | 269 ----------
tests/qemuhelpdata/qemu-1.1.0-device | 170 ------
tests/qemuhelpdata/qemu-1.2.0 | 272 ----------
tests/qemuhelpdata/qemu-kvm-0.12.3 | 215 --------
tests/qemuhelpdata/qemu-kvm-0.12.3-device | 63 ---
tests/qemuhelpdata/qemu-kvm-0.13.0 | 242 ---------
tests/qemuhelpdata/qemu-kvm-0.13.0-device | 90 ----
tests/qemuhelpdata/qemu-kvm-1.2.0 | 277 ----------
tests/qemuhelptest.c | 437 ---------------
18 files changed, 8 insertions(+), 3583 deletions(-)
delete mode 100644 tests/qemuhelpdata/qemu-0.12.1
delete mode 100644 tests/qemuhelpdata/qemu-0.12.1-device
delete mode 100644 tests/qemuhelpdata/qemu-1.0
delete mode 100644 tests/qemuhelpdata/qemu-1.0-device
delete mode 100644 tests/qemuhelpdata/qemu-1.1.0
delete mode 100644 tests/qemuhelpdata/qemu-1.1.0-device
delete mode 100644 tests/qemuhelpdata/qemu-1.2.0
delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.3
delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.3-device
delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.13.0
delete mode 100644 tests/qemuhelpdata/qemu-kvm-0.13.0-device
delete mode 100644 tests/qemuhelpdata/qemu-kvm-1.2.0
delete mode 100644 tests/qemuhelptest.c
diff --git a/cfg.mk b/cfg.mk
index 4aa26d434a..980f34bb7d 100644
--- a/cfg.mk
+++ b/cfg.mk
@@ -1225,7 +1225,7 @@ exclude_file_name_regexp--sc_require_config_h_first = \
^(examples/|tools/virsh-edit\.c$$)
exclude_file_name_regexp--sc_trailing_blank = \
- /qemuhelpdata/|/sysinfodata/.*\.data|/virhostcpudata/.*\.cpuinfo|^gnulib/local/.*/.*diff$$
+ /sysinfodata/.*\.data|/virhostcpudata/.*\.cpuinfo|^gnulib/local/.*/.*diff$$
exclude_file_name_regexp--sc_unmarked_diagnostics = \
^(docs/apibuild.py|tests/virt-aa-helper-test|docs/js/.*\.js)$$
diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c
index 959c27f3bf..0be39b76dd 100644
--- a/src/qemu/qemu_capabilities.c
+++ b/src/qemu/qemu_capabilities.c
@@ -625,28 +625,6 @@ virQEMUCapsFindTarget(virArch hostarch,
return guestarch;
}
-static virCommandPtr
-virQEMUCapsProbeCommand(const char *qemu,
- virQEMUCapsPtr qemuCaps,
- uid_t runUid, gid_t runGid)
-{
- virCommandPtr cmd = virCommandNew(qemu);
-
- if (qemuCaps) {
- if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_NO_USER_CONFIG))
- virCommandAddArg(cmd, "-no-user-config");
- else if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG))
- virCommandAddArg(cmd, "-nodefconfig");
- }
-
- virCommandAddEnvPassCommon(cmd);
- virCommandClearCaps(cmd);
- virCommandSetGID(cmd, runGid);
- virCommandSetUID(cmd, runUid);
-
- return cmd;
-}
-
static void
virQEMUCapsSetDefaultMachine(virQEMUCapsPtr qemuCaps,
@@ -661,282 +639,6 @@ virQEMUCapsSetDefaultMachine(virQEMUCapsPtr qemuCaps,
qemuCaps->machineTypes[0] = tmp;
}
-/* Format is:
- * <machine> <desc> [(default)|(alias of <canonical>)]
- */
-static int
-virQEMUCapsParseMachineTypesStr(const char *output,
- virQEMUCapsPtr qemuCaps)
-{
- const char *p = output;
- const char *next;
- size_t defIdx = 0;
-
- do {
- const char *t;
- char *name;
- char *canonical = NULL;
-
- if ((next = strchr(p, '\n')))
- ++next;
-
- if (STRPREFIX(p, "Supported machines are:"))
- continue;
-
- if (!(t = strchr(p, ' ')) || (next && t >= next))
- continue;
-
- if (VIR_STRNDUP(name, p, t - p) < 0)
- return -1;
-
- p = t;
- if ((t = strstr(p, "(default)")) && (!next || t < next))
- defIdx = qemuCaps->nmachineTypes;
-
- if ((t = strstr(p, "(alias of ")) && (!next || t < next)) {
- p = t + strlen("(alias of ");
- if (!(t = strchr(p, ')')) || (next && t >= next)) {
- VIR_FREE(name);
- continue;
- }
-
- if (VIR_STRNDUP(canonical, p, t - p) < 0) {
- VIR_FREE(name);
- return -1;
- }
- }
-
- if (VIR_REALLOC_N(qemuCaps->machineTypes, qemuCaps->nmachineTypes + 1) < 0) {
- VIR_FREE(name);
- VIR_FREE(canonical);
- return -1;
- }
- qemuCaps->nmachineTypes++;
- if (canonical) {
- qemuCaps->machineTypes[qemuCaps->nmachineTypes-1].name = canonical;
- qemuCaps->machineTypes[qemuCaps->nmachineTypes-1].alias = name;
- } else {
- qemuCaps->machineTypes[qemuCaps->nmachineTypes-1].name = name;
- qemuCaps->machineTypes[qemuCaps->nmachineTypes-1].alias = NULL;
- }
- /* When parsing from command line we don't have information about maxCpus */
- qemuCaps->machineTypes[qemuCaps->nmachineTypes-1].maxCpus = 0;
- qemuCaps->machineTypes[qemuCaps->nmachineTypes-1].hotplugCpus = false;
- } while ((p = next));
-
-
- if (defIdx)
- virQEMUCapsSetDefaultMachine(qemuCaps, defIdx);
-
- return 0;
-}
-
-static int
-virQEMUCapsProbeMachineTypes(virQEMUCapsPtr qemuCaps,
- uid_t runUid, gid_t runGid)
-{
- char *output;
- int ret = -1;
- virCommandPtr cmd;
- int status;
-
- /* Make sure the binary we are about to try exec'ing exists.
- * Technically we could catch the exec() failure, but that's
- * in a sub-process so it's hard to feed back a useful error.
- */
- if (!virFileIsExecutable(qemuCaps->binary)) {
- virReportSystemError(errno, _("Cannot find QEMU binary %s"),
- qemuCaps->binary);
- return -1;
- }
-
- cmd = virQEMUCapsProbeCommand(qemuCaps->binary, qemuCaps, runUid, runGid);
- virCommandAddArgList(cmd, "-M", "?", NULL);
- virCommandSetOutputBuffer(cmd, &output);
-
- /* Ignore failure from older qemu that did not understand '-M ?'. */
- if (virCommandRun(cmd, &status) < 0)
- goto cleanup;
-
- if (virQEMUCapsParseMachineTypesStr(output, qemuCaps) < 0)
- goto cleanup;
-
- ret = 0;
-
- cleanup:
- VIR_FREE(output);
- virCommandFree(cmd);
-
- return ret;
-}
-
-
-typedef int
-(*virQEMUCapsParseCPUModels)(const char *output,
- virQEMUCapsPtr qemuCaps);
-
-/* Format:
- * <arch> <model>
- * qemu-0.13 encloses some model names in []:
- * <arch> [<model>]
- */
-static int
-virQEMUCapsParseX86Models(const char *output,
- virQEMUCapsPtr qemuCaps)
-{
- const char *p = output;
- const char *next;
- virDomainCapsCPUModelsPtr cpus;
-
- if (!(cpus = virDomainCapsCPUModelsNew(0)))
- return -1;
-
- do {
- const char *t;
- size_t len;
-
- if ((next = strchr(p, '\n')))
- next++;
-
- if (!(t = strchr(p, ' ')) || (next && t >= next))
- continue;
-
- if (!STRPREFIX(p, "x86"))
- continue;
-
- p = t;
- while (*p == ' ')
- p++;
-
- if (*p == '\0' || *p == '\n')
- continue;
-
- if (next)
- len = next - p - 1;
- else
- len = strlen(p);
-
- if (len > 2 && *p == '[' && p[len - 1] == ']') {
- p++;
- len -= 2;
- }
-
- if (virDomainCapsCPUModelsAdd(cpus, p, len,
- VIR_DOMCAPS_CPU_USABLE_UNKNOWN, NULL) < 0)
- goto error;
- } while ((p = next));
-
- if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_KVM)) {
- virDomainCapsCPUModelsPtr kvmCPUs;
-
- if (!(kvmCPUs = virDomainCapsCPUModelsCopy(cpus)))
- goto error;
-
- qemuCaps->kvmCPUModels = kvmCPUs;
- }
- qemuCaps->tcgCPUModels = cpus;
-
- return 0;
-
- error:
- virObjectUnref(cpus);
- return -1;
-}
-
-/* ppc64 parser.
- * Format : PowerPC <machine> <description>
- */
-static int
-virQEMUCapsParsePPCModels(const char *output,
- virQEMUCapsPtr qemuCaps)
-{
- const char *p = output;
- const char *next;
- virDomainCapsCPUModelsPtr cpus;
-
- if (!(cpus = virDomainCapsCPUModelsNew(0)))
- return -1;
-
- do {
- const char *t;
-
- if ((next = strchr(p, '\n')))
- next++;
-
- if (!STRPREFIX(p, "PowerPC "))
- continue;
-
- /* Skip the preceding sub-string "PowerPC " */
- p += 8;
-
- /*Malformed string, does not obey the format 'PowerPC <model> <desc>'*/
- if (!(t = strchr(p, ' ')) || (next && t >= next))
- continue;
-
- if (*p == '\0')
- break;
-
- if (*p == '\n')
- continue;
-
- if (virDomainCapsCPUModelsAdd(cpus, p, t - p - 1,
- VIR_DOMCAPS_CPU_USABLE_UNKNOWN, NULL) < 0)
- goto error;
- } while ((p = next));
-
- if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_KVM)) {
- virDomainCapsCPUModelsPtr kvmCPUs;
-
- if (!(kvmCPUs = virDomainCapsCPUModelsCopy(cpus)))
- goto error;
-
- qemuCaps->kvmCPUModels = kvmCPUs;
- }
- qemuCaps->tcgCPUModels = cpus;
-
- return 0;
-
- error:
- virObjectUnref(cpus);
- return -1;
-}
-
-static int
-virQEMUCapsProbeCPUModels(virQEMUCapsPtr qemuCaps, uid_t runUid, gid_t runGid)
-{
- char *output = NULL;
- int ret = -1;
- virQEMUCapsParseCPUModels parse;
- virCommandPtr cmd;
-
- if (ARCH_IS_X86(qemuCaps->arch)) {
- parse = virQEMUCapsParseX86Models;
- } else if (ARCH_IS_PPC64(qemuCaps->arch)) {
- parse = virQEMUCapsParsePPCModels;
- } else {
- VIR_DEBUG("don't know how to parse %s CPU models",
- virArchToString(qemuCaps->arch));
- return 0;
- }
-
- cmd = virQEMUCapsProbeCommand(qemuCaps->binary, qemuCaps, runUid, runGid);
- virCommandAddArgList(cmd, "-cpu", "?", NULL);
- virCommandSetOutputBuffer(cmd, &output);
-
- if (virCommandRun(cmd, NULL) < 0)
- goto cleanup;
-
- if (parse(output, qemuCaps) < 0)
- goto cleanup;
-
- ret = 0;
-
- cleanup:
- VIR_FREE(output);
- virCommandFree(cmd);
-
- return ret;
-}
static char *
virQEMUCapsFindBinary(const char *format,
@@ -1255,312 +957,6 @@ virQEMUCapsInit(virFileCachePtr cache)
}
-static int
-virQEMUCapsComputeCmdFlags(const char *help,
- unsigned int version,
- virQEMUCapsPtr qemuCaps,
- bool check_yajl ATTRIBUTE_UNUSED)
-{
- const char *p;
- const char *fsdev, *netdev;
- const char *cache;
-
- if (strstr(help, "-no-kvm"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_KVM);
- if (strstr(help, "-enable-kvm"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_ENABLE_KVM);
- if (strstr(help, ",process="))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NAME_PROCESS);
-
- cache = strstr(help, "cache=");
- if (cache && (p = strchr(cache, ']'))) {
- if (memmem(cache, p - cache, "directsync", sizeof("directsync") - 1))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DRIVE_CACHE_DIRECTSYNC);
- if (memmem(cache, p - cache, "unsafe", sizeof("unsafe") - 1))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DRIVE_CACHE_UNSAFE);
- }
- if (strstr(help, "aio=threads|native"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DRIVE_AIO);
- if (strstr(help, "copy-on-read=on|off"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DRIVE_COPY_ON_READ);
- if (strstr(help, "bps="))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DRIVE_IOTUNE);
-
- if (strstr(help, "-display"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DISPLAY);
- if ((p = strstr(help, "-vga")) && !strstr(help, "-std-vga")) {
- const char *nl = strstr(p, "\n");
- if ((p = strstr(p, "|none")) && p < nl)
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_VGA_NONE);
- }
- if (strstr(help, "-spice"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_SPICE);
- if (strstr(help, "-vnc"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_VNC);
- if (strstr(help, "seamless-migration="))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_SEAMLESS_MIGRATION);
- if (strstr(help, "boot=on"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DRIVE_BOOT);
- if (strstr(help, "serial=s"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DRIVE_SERIAL);
- if (strstr(help, "host=[seg:]bus"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_HOST_PCI_MULTIDOMAIN);
- if (strstr(help, "-mem-path"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_MEM_PATH);
- if (strstr(help, "-chardev spicevmc"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_CHARDEV_SPICEVMC);
- if (strstr(help, "-chardev spiceport"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_CHARDEV_SPICEPORT);
- if (strstr(help, "-nodefconfig"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NODEFCONFIG);
- if (strstr(help, "-no-user-config"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NO_USER_CONFIG);
- /* The trailing ' ' is important to avoid a bogus match */
- if (strstr(help, "-rtc "))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_RTC);
- /* to wit */
- if (strstr(help, "-rtc-td-hack"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_RTC_TD_HACK);
- if (strstr(help, "-no-hpet"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NO_HPET);
- if (strstr(help, "-no-acpi"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NO_ACPI);
- if (strstr(help, "-no-kvm-pit-reinjection"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NO_KVM_PIT);
- if (strstr(help, "-tdf"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_TDF);
- if (strstr(help, "-enable-nesting"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NESTING);
- if (strstr(help, ",menu=on"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_BOOT_MENU);
- if (strstr(help, ",reboot-timeout=rb_time"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_REBOOT_TIMEOUT);
- if (strstr(help, ",splash-time=sp_time"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_SPLASH_TIMEOUT);
- if ((fsdev = strstr(help, "-fsdev"))) {
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_FSDEV);
- if (strstr(fsdev, "readonly"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_FSDEV_READONLY);
- if (strstr(fsdev, "writeout"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_FSDEV_WRITEOUT);
- }
- if (strstr(help, "-smbios type"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_SMBIOS_TYPE);
- if (strstr(help, "-sandbox"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_SECCOMP_SANDBOX);
-
- if ((netdev = strstr(help, "-netdev"))) {
- /* Disable -netdev on 0.12 since although it exists,
- * the corresponding netdev_add/remove monitor commands
- * do not, and we need them to be able to do hotplug. */
- if (version >= 13000) {
- if (strstr(netdev, "bridge"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NETDEV_BRIDGE);
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NETDEV);
- }
- }
-
- if (strstr(help, "-sdl"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_SDL);
-
- if (strstr(help, ",vhost="))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_VHOST_NET);
-
- /* Do not use -no-shutdown if qemu doesn't support it or SIGTERM handling
- * is most likely buggy when used with -no-shutdown (which applies for qemu
- * 0.14.* and 0.15.0)
- */
- if (strstr(help, "-no-shutdown") && (version < 14000 || version > 15000))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NO_SHUTDOWN);
-
- if (strstr(help, "dump-guest-core=on|off"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DUMP_GUEST_CORE);
-
- if (strstr(help, "-dtb"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_DTB);
-
- if (strstr(help, "-machine"))
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_MACHINE_OPT);
-
- /* While JSON mode was available in 0.12.0, it was too
- * incomplete to contemplate using. The 0.13.0 release
- * is good enough to use, even though it lacks one or
- * two features. */
-#if WITH_YAJL
- if (version >= 13000)
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_MONITOR_JSON);
-#else
- /* Starting with qemu 0.15 and newer, upstream qemu no longer
- * promises to keep the human interface stable, but requests that
- * we use QMP (the JSON interface) for everything. If the user
- * forgot to include YAJL libraries when building their own
- * libvirt but is targeting a newer qemu, we are better off
- * telling them to recompile (the spec file includes the
- * dependency, so distros won't hit this). This check is
- * also in m4/virt-yajl.m4 (see $with_yajl). */
- if (version >= 15000) {
- if (check_yajl) {
- virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
- _("this qemu binary requires libvirt to be "
- "compiled with yajl"));
- return -1;
- }
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_NETDEV);
- }
-#endif
-
- if (version >= 13000)
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_PCI_MULTIFUNCTION);
-
- if (version >= 1001000) {
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_IPV6_MIGRATION);
- virQEMUCapsSet(qemuCaps, QEMU_CAPS_VNC_SHARE_POLICY);
- }
-
- return 0;
-}
-
-/* We parse the output of 'qemu -help' to get the QEMU
- * version number. The first bit is easy, just parse
- * 'QEMU PC emulator version x.y.z'
- * or
- * 'QEMU emulator version x.y.z'.
- *
- * With qemu-kvm, however, that is followed by a string
- * in parenthesis as follows:
- * - qemu-kvm-x.y.z in stable releases
- * - kvm-XX for kvm versions up to kvm-85
- * - qemu-kvm-devel-XX for kvm version kvm-86 and later
- *
- * For qemu-kvm versions before 0.10.z, we need to detect
- * the KVM version number for some features. With 0.10.z
- * and later, we just need the QEMU version number and
- * whether it is KVM QEMU or mainline QEMU.
- */
-#define QEMU_VERSION_STR_1 "QEMU emulator version"
-#define QEMU_VERSION_STR_2 "QEMU PC emulator version"
-#define QEMU_KVM_VER_PREFIX "(qemu-kvm-"
-#define KVM_VER_PREFIX "(kvm-"
-
-#define SKIP_BLANKS(p) do { while ((*(p) == ' ') || (*(p) == '\t')) (p)++; } while (0)
-
-int virQEMUCapsParseHelpStr(const char *qemu,
- const char *help,
- virQEMUCapsPtr qemuCaps,
- unsigned int *version,
- bool *is_kvm,
- unsigned int *kvm_version,
- bool check_yajl,
- const char *qmperr)
-{
- unsigned major, minor, micro;
- const char *p = help;
- char *strflags;
-
- *version = *kvm_version = 0;
- *is_kvm = false;
-
- if (STRPREFIX(p, QEMU_VERSION_STR_1))
- p += strlen(QEMU_VERSION_STR_1);
- else if (STRPREFIX(p, QEMU_VERSION_STR_2))
- p += strlen(QEMU_VERSION_STR_2);
- else
- goto fail;
-
- SKIP_BLANKS(p);
-
- major = virParseNumber(&p);
- if (major == -1 || *p != '.')
- goto fail;
-
- ++p;
-
- minor = virParseNumber(&p);
- if (minor == -1)
- goto fail;
-
- if (*p != '.') {
- micro = 0;
- } else {
- ++p;
- micro = virParseNumber(&p);
- if (micro == -1)
- goto fail;
- }
-
- SKIP_BLANKS(p);
-
- if (STRPREFIX(p, QEMU_KVM_VER_PREFIX)) {
- *is_kvm = true;
- p += strlen(QEMU_KVM_VER_PREFIX);
- } else if (STRPREFIX(p, KVM_VER_PREFIX)) {
- int ret;
-
- *is_kvm = true;
- p += strlen(KVM_VER_PREFIX);
-
- ret = virParseNumber(&p);
- if (ret == -1)
- goto fail;
-
- *kvm_version = ret;
- }
-
- *version = (major * 1000 * 1000) + (minor * 1000) + micro;
-
- if (*version < 12000) {
- virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("QEMU version >= 0.12.00 is required, but %d.%d.%d found"),
- major, minor, micro);
- goto cleanup;
- }
-
- /* Refuse to parse -help output for QEMU releases >= 1.2.0 that should be
- * using QMP probing.
- */
- if (*version >= 1002000) {
- if (qmperr && *qmperr) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("QEMU / QMP failed: %s"),
- qmperr);
- } else {
- virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
- _("QEMU %u.%u.%u is too new for help parsing"),
- major, minor, micro);
- }
- goto cleanup;
- }
-
- if (virQEMUCapsComputeCmdFlags(help, *version,
- qemuCaps, check_yajl) < 0)
- goto cleanup;
-
- strflags = virBitmapToString(qemuCaps->flags, true, false);
- VIR_DEBUG("Version %u.%u.%u, cooked version %u, flags %s",
- major, minor, micro, *version, NULLSTR(strflags));
- VIR_FREE(strflags);
-
- if (*kvm_version)
- VIR_DEBUG("KVM version %d detected", *kvm_version);
- else if (*is_kvm)
- VIR_DEBUG("qemu-kvm version %u.%u.%u detected", major, minor, micro);
-
- return 0;
-
- fail:
- p = strchr(help, '\n');
- if (!p)
- p = strchr(help, '\0');
-
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("cannot parse %s version number in '%.*s'"),
- qemu, (int) (p - help), help);
-
- cleanup:
- return -1;
-}
-
-
struct virQEMUCapsStringFlags {
const char *value;
int flag;
@@ -1988,184 +1384,6 @@ virQEMUCapsProcessStringFlags(virQEMUCapsPtr qemuCaps,
}
-#define OBJECT_TYPE_PREFIX "name \""
-
-static int
-virQEMUCapsParseDeviceStrObjectTypes(const char *str,
- char ***types)
-{
- const char *tmp = str;
- int ret = -1;
- size_t ntypelist = 0;
- char **typelist = NULL;
-
- *types = NULL;
-
- while ((tmp = strstr(tmp, OBJECT_TYPE_PREFIX))) {
- char *end;
- tmp += strlen(OBJECT_TYPE_PREFIX);
- end = strstr(tmp, "\"");
- if (!end) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("Malformed QEMU device list string, missing quote"));
- goto cleanup;
- }
-
- if (VIR_EXPAND_N(typelist, ntypelist, 1) < 0)
- goto cleanup;
- if (VIR_STRNDUP(typelist[ntypelist - 1], tmp, end-tmp) < 0)
- goto cleanup;
- }
-
- *types = typelist;
- ret = ntypelist;
-
- cleanup:
- if (ret < 0)
- virStringListFreeCount(typelist, ntypelist);
- return ret;
-}
-
-
-static int
-virQEMUCapsParseDeviceStrObjectProps(const char *str,
- const char *type,
- char ***props)
-{
- const char *tmp = str;
- int ret = -1;
- size_t nproplist = 0;
- char **proplist = NULL;
-
- VIR_DEBUG("Extract type %s", type);
- *props = NULL;
-
- while ((tmp = strchr(tmp, '\n'))) {
- char *end;
- tmp += 1;
-
- if (*tmp == '\0')
- break;
-
- if (STRPREFIX(tmp, OBJECT_TYPE_PREFIX))
- continue;
-
- if (!STRPREFIX(tmp, type))
- continue;
-
- tmp += strlen(type);
- if (*tmp != '.')
- continue;
- tmp++;
-
- end = strstr(tmp, "=");
- if (!end) {
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("Malformed QEMU device list string, missing '='"));
- goto cleanup;
- }
- if (VIR_EXPAND_N(proplist, nproplist, 1) < 0)
- goto cleanup;
- if (VIR_STRNDUP(proplist[nproplist - 1], tmp, end-tmp) < 0)
- goto cleanup;
- }
-
- *props = proplist;
- ret = nproplist;
-
- cleanup:
- if (ret < 0)
- virStringListFreeCount(proplist, nproplist);
- return ret;
-}
-
-
-int
-virQEMUCapsParseDeviceStr(virQEMUCapsPtr qemuCaps, const char *str)
-{
- int nvalues;
- char **values;
- size_t i;
-
- if ((nvalues = virQEMUCapsParseDeviceStrObjectTypes(str, &values)) < 0)
- return -1;
- virQEMUCapsProcessStringFlags(qemuCaps,
- ARRAY_CARDINALITY(virQEMUCapsObjectTypes),
- virQEMUCapsObjectTypes,
- nvalues, values);
- virStringListFreeCount(values, nvalues);
-
- for (i = 0; i < ARRAY_CARDINALITY(virQEMUCapsObjectProps); i++) {
- const char *type = virQEMUCapsObjectProps[i].type;
- if ((nvalues = virQEMUCapsParseDeviceStrObjectProps(str,
- type,
- &values)) < 0)
- return -1;
- virQEMUCapsProcessStringFlags(qemuCaps,
- virQEMUCapsObjectProps[i].nprops,
- virQEMUCapsObjectProps[i].props,
- nvalues, values);
- virStringListFreeCount(values, nvalues);
- }
-
- /* Prefer -chardev spicevmc (detected earlier) over -device spicevmc */
- if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_CHARDEV_SPICEVMC))
- virQEMUCapsClear(qemuCaps, QEMU_CAPS_DEVICE_SPICEVMC);
-
- return 0;
-}
-
-
-static int
-virQEMUCapsExtractDeviceStr(const char *qemu,
- virQEMUCapsPtr qemuCaps,
- uid_t runUid, gid_t runGid)
-{
- char *output = NULL;
- virCommandPtr cmd;
- int ret = -1;
-
- /* Cram together all device-related queries into one invocation;
- * the output format makes it possible to distinguish what we
- * need. With qemu 0.13.0 and later, unrecognized '-device
- * bogus,?' cause an error in isolation, but are silently ignored
- * in combination with '-device ?'. Upstream qemu 0.12.x doesn't
- * understand '-device name,?', and always exits with status 1 for
- * the simpler '-device ?', so this function is really only useful
- * if -help includes "device driver,?". */
- cmd = virQEMUCapsProbeCommand(qemu, qemuCaps, runUid, runGid);
- virCommandAddArgList(cmd,
- "-device", "?",
- "-device", "pci-assign,?",
- "-device", "virtio-blk-pci,?",
- "-device", "virtio-net-pci,?",
- "-device", "scsi-disk,?",
- "-device", "PIIX4_PM,?",
- "-device", "usb-redir,?",
- "-device", "ide-drive,?",
- "-device", "usb-host,?",
- "-device", "scsi-generic,?",
- "-device", "usb-storage,?",
- "-device", "VGA,?",
- "-device", "vmware-svga,?",
- "-device", "qxl,?",
- "-device", "qxl-vga,?",
- NULL);
- /* qemu -help goes to stdout, but qemu -device ? goes to stderr. */
- virCommandSetErrorBuffer(cmd, &output);
-
- if (virCommandRun(cmd, NULL) < 0)
- goto cleanup;
-
- ret = virQEMUCapsParseDeviceStr(qemuCaps, output);
-
- cleanup:
- VIR_FREE(output);
- virCommandFree(cmd);
- return ret;
-}
-
-
int virQEMUCapsGetDefaultVersion(virCapsPtr caps,
virFileCachePtr capsCache,
unsigned int *version)
@@ -4400,76 +3618,6 @@ virQEMUCapsIsValid(void *data,
}
-#define QEMU_SYSTEM_PREFIX "qemu-system-"
-
-static int
-virQEMUCapsInitHelp(virQEMUCapsPtr qemuCaps, uid_t runUid, gid_t runGid, const char *qmperr)
-{
- virCommandPtr cmd = NULL;
- bool is_kvm;
- char *help = NULL;
- int ret = -1;
- const char *tmp;
-
- VIR_DEBUG("qemuCaps=%p", qemuCaps);
-
- tmp = strstr(qemuCaps->binary, QEMU_SYSTEM_PREFIX);
- if (tmp) {
- tmp += strlen(QEMU_SYSTEM_PREFIX);
-
- qemuCaps->arch = virQEMUCapsArchFromString(tmp);
- } else {
- qemuCaps->arch = virArchFromHost();
- }
-
- cmd = virQEMUCapsProbeCommand(qemuCaps->binary, NULL, runUid, runGid);
- virCommandAddArgList(cmd, "-help", NULL);
- virCommandSetOutputBuffer(cmd, &help);
-
- if (virCommandRun(cmd, NULL) < 0)
- goto cleanup;
-
- if (virQEMUCapsParseHelpStr(qemuCaps->binary,
- help, qemuCaps,
- &qemuCaps->version,
- &is_kvm,
- &qemuCaps->kvmVersion,
- false,
- qmperr) < 0)
- goto cleanup;
-
- /* Older QEMU versions reported -no-acpi in the output of -help even
- * though it was not supported by the architecture. The issue has since
- * been fixed, but to maintain compatibility with all release we still
- * need to filter out the capability for architectures that we know
- * don't support the feature, eg. anything but x86 and aarch64 */
- if (!ARCH_IS_X86(qemuCaps->arch) &&
- qemuCaps->arch != VIR_ARCH_AARCH64) {
- virQEMUCapsClear(qemuCaps, QEMU_CAPS_NO_ACPI);
- }
-
- /* virQEMUCapsExtractDeviceStr will only set additional caps if qemu
- * understands the 0.13.0+ notion of "-device driver,". */
- if (strstr(help, "-device driver,?") &&
- virQEMUCapsExtractDeviceStr(qemuCaps->binary,
- qemuCaps, runUid, runGid) < 0) {
- goto cleanup;
- }
-
- if (virQEMUCapsProbeCPUModels(qemuCaps, runUid, runGid) < 0)
- goto cleanup;
-
- if (virQEMUCapsProbeMachineTypes(qemuCaps, runUid, runGid) < 0)
- goto cleanup;
-
- ret = 0;
- cleanup:
- virCommandFree(cmd);
- VIR_FREE(help);
- return ret;
-}
-
-
static void virQEMUCapsMonitorNotify(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
virDomainObjPtr vm ATTRIBUTE_UNUSED,
void *opaque ATTRIBUTE_UNUSED)
@@ -5077,8 +4225,7 @@ virQEMUCapsNewForBinaryInternal(virArch hostArch,
uid_t runUid,
gid_t runGid,
unsigned int microcodeVersion,
- const char *kernelVersion,
- bool qmpOnly)
+ const char *kernelVersion)
{
virQEMUCapsPtr qemuCaps;
struct stat sb;
@@ -5114,7 +4261,7 @@ virQEMUCapsNewForBinaryInternal(virArch hostArch,
goto error;
}
- if (qmpOnly && !qemuCaps->usedQMP) {
+ if (!qemuCaps->usedQMP) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to probe QEMU binary with QMP: %s"),
qmperr ? qmperr : _("unknown error"));
@@ -5122,12 +4269,6 @@ virQEMUCapsNewForBinaryInternal(virArch hostArch,
goto error;
}
- if (!qemuCaps->usedQMP &&
- virQEMUCapsInitHelp(qemuCaps, runUid, runGid, qmperr) < 0) {
- virQEMUCapsLogProbeFailure(binary);
- goto error;
- }
-
qemuCaps->libvirtCtime = virGetSelfLastChanged();
qemuCaps->libvirtVersion = LIBVIR_VERSION_NUMBER;
@@ -5163,8 +4304,7 @@ virQEMUCapsNewData(const char *binary,
priv->runUid,
priv->runGid,
priv->microcodeVersion,
- priv->kernelVersion,
- false);
+ priv->kernelVersion);
}
diff --git a/src/qemu/qemu_capspriv.h b/src/qemu/qemu_capspriv.h
index 222f3368e3..0199501c93 100644
--- a/src/qemu/qemu_capspriv.h
+++ b/src/qemu/qemu_capspriv.h
@@ -37,8 +37,7 @@ virQEMUCapsNewForBinaryInternal(virArch hostArch,
uid_t runUid,
gid_t runGid,
unsigned int microcodeVersion,
- const char *kernelVersion,
- bool qmpOnly);
+ const char *kernelVersion);
int virQEMUCapsLoadCache(virArch hostArch,
virQEMUCapsPtr qemuCaps,
@@ -86,20 +85,6 @@ virQEMUCapsSetGICCapabilities(virQEMUCapsPtr qemuCaps,
virGICCapability *capabilities,
size_t ncapabilities);
-int
-virQEMUCapsParseHelpStr(const char *qemu,
- const char *str,
- virQEMUCapsPtr qemuCaps,
- unsigned int *version,
- bool *is_kvm,
- unsigned int *kvm_version,
- bool check_yajl,
- const char *qmperr);
-
-int
-virQEMUCapsParseDeviceStr(virQEMUCapsPtr qemuCaps,
- const char *str);
-
int
virQEMUCapsProbeQMPCPUDefinitions(virQEMUCapsPtr qemuCaps,
qemuMonitorPtr mon,
diff --git a/tests/Makefile.am b/tests/Makefile.am
index f2f5caed4f..53857df201 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -121,7 +121,6 @@ EXTRA_DIST = \
qemuargv2xmldata \
qemucapabilitiesdata \
qemucaps2xmldata \
- qemuhelpdata \
qemuhotplugtestcpus \
qemuhotplugtestdevices \
qemuhotplugtestdomains \
@@ -284,7 +283,7 @@ endif WITH_LIBXL
if WITH_QEMU
test_programs += qemuxml2argvtest qemuxml2xmltest \
- qemuargv2xmltest qemuhelptest domainsnapshotxml2xmltest \
+ qemuargv2xmltest domainsnapshotxml2xmltest \
qemumonitortest qemumonitorjsontest qemuhotplugtest \
qemuagenttest qemucapabilitiestest qemucaps2xmltest \
qemumemlocktest \
@@ -604,9 +603,6 @@ qemuargv2xmltest_SOURCES = \
testutils.c testutils.h
qemuargv2xmltest_LDADD = $(qemu_LDADDS) $(LDADDS)
-qemuhelptest_SOURCES = qemuhelptest.c testutils.c testutils.h
-qemuhelptest_LDADD = $(qemu_LDADDS) $(LDADDS)
-
qemumonitortest_SOURCES = \
qemumonitortest.c \
testutils.c testutils.h \
@@ -694,7 +690,7 @@ qemumemlocktest_SOURCES = \
qemumemlocktest_LDADD = $(qemu_LDADDS) $(LDADDS)
else ! WITH_QEMU
EXTRA_DIST += qemuxml2argvtest.c qemuxml2xmltest.c qemuargv2xmltest.c \
- qemuhelptest.c domainsnapshotxml2xmltest.c \
+ domainsnapshotxml2xmltest.c \
qemumonitortest.c testutilsqemu.c testutilsqemu.h \
testutilsqemuschema.c testutilsqemuschema.h \
qemumonitorjsontest.c qemuhotplugtest.c \
diff --git a/tests/qemucapsprobe.c b/tests/qemucapsprobe.c
index 7d60246949..54084218b7 100644
--- a/tests/qemucapsprobe.c
+++ b/tests/qemucapsprobe.c
@@ -72,7 +72,7 @@ main(int argc, char **argv)
return EXIT_FAILURE;
if (!(caps = virQEMUCapsNewForBinaryInternal(VIR_ARCH_NONE, argv[1], "/tmp",
- -1, -1, 0, NULL, true)))
+ -1, -1, 0, NULL)))
return EXIT_FAILURE;
virObjectUnref(caps);
diff --git a/tests/qemuhelpdata/qemu-0.12.1 b/tests/qemuhelpdata/qemu-0.12.1
deleted file mode 100644
index 0caa3b36a2..0000000000
--- a/tests/qemuhelpdata/qemu-0.12.1
+++ /dev/null
@@ -1,198 +0,0 @@
-QEMU PC emulator version 0.12.1, Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--version display version information and exit
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
- set the number of CPUs to 'n' [default=1]
- maxcpus= maximum number of total cpus, including
- offline CPUs for hotplug etc.
- cores= number of CPU cores on one socket
- threads= number of threads on one CPU core
- sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none][,format=f][,serial=s]
- [,addr=A][,id=name][,aio=threads|native]
- use 'file' as a drive image
--set group.id.arg=value
- set <arg> parameter for item <id> of type <group>
- i.e. -set drive.$id.file=/path/to/image
--global driver.property=value
- set a global default for a driver property
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
- 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--k language use keyboard layout (for example 'fr' for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,options] add device
--name string1[,process=string2] set the name of the guest
- string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--nographic disable graphical output and redirect serial I/Os to console
--curses use a curses/ncurses interface instead of SDL
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--portrait rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|xenfb|none]
- select video card type
--full-screen start in full screen
--vnc display start a VNC server on display
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--balloon none disable balloon device
--balloon virtio[,addr=str]
- enable virtio balloon device (default)
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
- ACPI table description
--smbios file=binary
- Load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- Specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- Specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n]
- [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
- [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
- connect the user mode network stack to VLAN 'n', configure its
- DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown);
- use '[down]script=no' to disable script execution;
- use 'fd=h' to connect to an already opened TAP interface
- use 'sndbuf=nbytes' to limit the size of the send buffer; the
- default of 'sndbuf=1048576' can be disabled using 'sndbuf=0'
- use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag; use
- vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net dump[,vlan=n][,file=f][,len=n]
- dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none use it alone to have zero network devices; if no -net option
- is provided, the default is '-net nic -net user'
--netdev [user|tap|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
- [,server][,nowait][,telnet] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
- [,localport=localport][,ipv4][,ipv6]
--chardev msmouse,id=id
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
--chardev file,id=id,path=path
--chardev pipe,id=id,path=path
--chardev pty,id=id
--chardev stdio,id=id
--chardev tty,id=id,path=path
--chardev parport,id=id,path=path
-
-Bluetooth(R) options:
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--qmp dev like -monitor but opens in 'control' mode.
--mon chardev=[name][,mode=readline|control][,default]
--pidfile file write PID to 'file'
--singlestep always run in singlestep mode
--S freeze CPU at startup (use 'c' to start execution)
--gdb dev wait for gdb connection on 'dev'
--s shorthand for -gdb tcp::1234
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--enable-kvm enable KVM full virtualization support
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew]
- set the RTC base and clock, enable drift fix for clock ticks
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per
- instruction
--watchdog i6300esb|ib700
- enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
- action when watchdog fires [default=reset]
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--nodefaults don't create default devices.
--chroot dir Chroot to dir just before starting the VM.
--runas user Change to user id user just before starting the VM.
--readconfig <file>
--writeconfig <file>
- read/write config file
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-0.12.1-device b/tests/qemuhelpdata/qemu-0.12.1-device
deleted file mode 100644
index 63c7bef4d6..0000000000
--- a/tests/qemuhelpdata/qemu-0.12.1-device
+++ /dev/null
@@ -1,62 +0,0 @@
-name "pci-bridge", bus PCI
-name "virtio-balloon-pci", bus PCI
-name "virtio-console-pci", bus PCI
-name "virtio-net-pci", bus PCI
-name "virtio-blk-pci", bus PCI
-name "i82562", bus PCI
-name "i82559er", bus PCI
-name "i82559c", bus PCI
-name "i82559b", bus PCI
-name "i82559a", bus PCI
-name "i82558b", bus PCI
-name "i82558a", bus PCI
-name "i82557c", bus PCI
-name "i82557b", bus PCI
-name "i82557a", bus PCI
-name "i82551", bus PCI
-name "i82550", bus PCI
-name "pcnet", bus PCI
-name "rtl8139", bus PCI
-name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
-name "ide-drive", bus IDE
-name "isa-ide", bus ISA
-name "piix4-ide", bus PCI, no-user
-name "piix3-ide", bus PCI, no-user
-name "i8042", bus ISA, no-user
-name "sb16", bus ISA, desc "Creative Sound Blaster 16"
-name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
-name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
-name "VGA", bus PCI
-name "SUNW,fdtwo", bus System
-name "sysbus-fdc", bus System
-name "isa-fdc", bus ISA, no-user
-name "mc146818rtc", bus ISA, no-user
-name "isa-serial", bus ISA
-name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
-name "isa-parallel", bus ISA
-name "PIIX3", bus PCI, desc "ISA bridge", no-user
-name "i440FX", bus PCI, desc "Host bridge", no-user
-name "i440FX-pcihost", bus System, no-user
-name "piix4-usb-uhci", bus PCI
-name "piix3-usb-uhci", bus PCI
-name "vmware-svga", bus PCI
-name "ib700", bus ISA
-name "ne2k_isa", bus ISA
-name "smbus-eeprom", bus I2C
-name "scsi-disk", bus SCSI, desc "virtual scsi disk or cdrom"
-name "scsi-generic", bus SCSI, desc "pass through generic scsi device (/dev/sg*)"
-name "usb-hub", bus USB
-name "usb-host", bus USB
-name "usb-kbd", bus USB
-name "usb-mouse", bus USB
-name "usb-tablet", bus USB
-name "usb-storage", bus USB
-name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet"
-name "usb-braille", bus USB
-name "usb-serial", bus USB
-name "usb-net", bus USB
-name "usb-bt-dongle", bus USB
-name "i6300esb", bus PCI
-name "ne2k_pci", bus PCI
-name "lsi53c895a", bus PCI, alias "lsi"
-name "isabus-bridge", bus System, no-user
diff --git a/tests/qemuhelpdata/qemu-1.0 b/tests/qemuhelpdata/qemu-1.0
deleted file mode 100644
index d6af0ec552..0000000000
--- a/tests/qemuhelpdata/qemu-1.0
+++ /dev/null
@@ -1,253 +0,0 @@
-QEMU emulator version 1.0, Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard disk image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--version display version information and exit
--machine [type=]name[,prop[=value][,...]]
- selects emulated machine (-machine ? for list)
- property accel=accel1[:accel2[:...]] selects accelerator
- supported accelerators are kvm, xen, tcg (default: tcg)
--cpu cpu select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
- set the number of CPUs to 'n' [default=1]
- maxcpus= maximum number of total cpus, including
- offline CPUs for hotplug, etc
- cores= number of CPU cores on one socket
- threads= number of threads on one CPU core
- sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]
- [,serial=s][,addr=A][,id=name][,aio=threads|native]
- [,readonly=on|off]
- use 'file' as a drive image
--set group.id.arg=value
- set <arg> parameter for item <id> of type <group>
- i.e. -set drive.$id.file=/path/to/image
--global driver.property=value
- set a global default for a driver property
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
- [,splash=sp_name][,splash-time=sp_time]
- 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
- 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on
- 'sp_time': the period that splash picture last if menu=on, unit is ms
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--mem-path FILE provide backing storage for guest RAM
--mem-prealloc preallocate guest memory (use with -mem-path)
--k language use keyboard layout (for example 'fr' for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,prop[=value][,...]]
- add device (based on driver)
- prop=value,... sets driver properties
- use -device ? to print all possible drivers
- use -device driver,? to print all possible properties
-
-File system options:
--fsdev fsdriver,id=id,path=path,[security_model={mapped|passthrough|none}]
- [,writeout=immediate][,readonly]
-
-Virtual File system pass-through options:
--virtfs local,path=path,mount_tag=tag,security_model=[mapped|passthrough|none]
- [,writeout=immediate][,readonly]
--virtfs_synth Create synthetic file system image
-
--name string1[,process=string2]
- set the name of the guest
- string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]
- [,window_close=on|off]|curses|none|
- vnc=<display>[,<optargs>]
- select display type
--nographic disable graphical output and redirect serial I/Os to console
--curses use a curses/ncurses interface instead of SDL
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--spice <args> enable spice
--portrait rotate graphical output 90 deg left (only PXA LCD)
--rotate <deg> rotate graphical output some deg left (only PXA LCD)
--vga [std|cirrus|vmware|qxl|xenfb|none]
- select video card type
--full-screen start in full screen
--g WxH[xDEPTH] Set the initial graphical resolution and depth
--vnc display start a VNC server on display
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--balloon none disable balloon device
--balloon virtio[,addr=str]
- enable virtio balloon device (default)
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]
- ACPI table description
--smbios file=binary
- load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]
- [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
- [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
- connect the user mode network stack to VLAN 'n', configure its
- DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown)
- use '[down]script=no' to disable script execution
- use 'fd=h' to connect to an already opened TAP interface
- use 'sndbuf=nbytes' to limit the size of the send buffer (the
- default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')
- use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag
- use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
- use vhost=on to enable experimental in kernel accelerator
- (only has effect for virtio guests which use MSIX)
- use vhostforce=on to force vhost on for non-MSIX virtio guests
- use 'vhostfd=h' to connect to an already opened vhost net device
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]]
- connect the vlan 'n' to multicast maddr and port
- use 'localaddr=addr' to specify the host address to send packets from
--net dump[,vlan=n][,file=f][,len=n]
- dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none use it alone to have zero network devices. If no -net option
- is provided, the default is '-net nic -net user'
--netdev [user|tap|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id[,mux=on|off]
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
- [,server][,nowait][,telnet][,mux=on|off] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
- [,localport=localport][,ipv4][,ipv6][,mux=on|off]
--chardev msmouse,id=id[,mux=on|off]
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
- [,mux=on|off]
--chardev file,id=id,path=path[,mux=on|off]
--chardev pipe,id=id,path=path[,mux=on|off]
--chardev pty,id=id[,mux=on|off]
--chardev stdio,id=id[,mux=on|off][,signal=on|off]
--chardev braille,id=id[,mux=on|off]
--chardev tty,id=id,path=path[,mux=on|off]
--chardev parport,id=id,path=path[,mux=on|off]
--chardev spicevmc,id=id,name=name[,debug=debug]
-
-Bluetooth(R) options:
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--qmp dev like -monitor but opens in 'control' mode
--mon chardev=[name][,mode=readline|control][,default]
--debugcon dev redirect the debug console to char device 'dev'
--pidfile file write PID to 'file'
--singlestep always run in singlestep mode
--S freeze CPU at startup (use 'c' to start execution)
--gdb dev wait for gdb connection on 'dev'
--s shorthand for -gdb tcp::1234
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--D logfile output log to logfile (instead of the default /tmp/qemu.log)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--enable-kvm enable KVM full virtualization support
--xen-domid id specify xen guest domain id
--xen-create create domain using xen hypercalls, bypassing xend
- warning: should not be used when xend is in use
--xen-attach attach to existing xen domain
- xend will use this when starting qemu
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew]
- set the RTC base and clock, enable drift fix for clock ticks (x86 only)
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per
- instruction
--watchdog i6300esb|ib700
- enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
- action when watchdog fires [default=reset]
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--nodefaults don't create default devices
--chroot dir chroot to dir just before starting the VM
--runas user change to user id user just before starting the VM
--prom-env variable=value
- set OpenBIOS nvram variables
--semihosting semihosting mode
--old-param old param mode
--readconfig <file>
--writeconfig <file>
- read/write config file
--nodefconfig
- do not load default config files at startup
--trace [events=<file>][,file=<file>]
- specify tracing options
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-1.0-device b/tests/qemuhelpdata/qemu-1.0-device
deleted file mode 100644
index a249dd2e9f..0000000000
--- a/tests/qemuhelpdata/qemu-1.0-device
+++ /dev/null
@@ -1,148 +0,0 @@
-name "ib700", bus ISA
-name "sga", bus ISA, desc "Serial Graphics Adapter"
-name "qxl", bus PCI, desc "Spice QXL GPU (secondary)"
-name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)"
-name "ivshmem", bus PCI
-name "isa-debugcon", bus ISA
-name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
-name "virtio-9p-pci", bus PCI
-name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet"
-name "usb-braille", bus USB
-name "usb-serial", bus USB
-name "usb-net", bus USB
-name "usb-storage", bus USB
-name "usb-host", bus USB
-name "usb-hub", bus USB
-name "usb-kbd", bus USB
-name "usb-mouse", bus USB
-name "usb-tablet", bus USB
-name "usb-bt-dongle", bus USB
-name "smbus-eeprom", bus I2C
-name "scsi-generic", bus SCSI, desc "pass through generic scsi device (/dev/sg*)"
-name "scsi-disk", bus SCSI, desc "virtual SCSI disk or CD-ROM (legacy)"
-name "scsi-block", bus SCSI, desc "SCSI block device passthrough"
-name "scsi-cd", bus SCSI, desc "virtual SCSI CD-ROM"
-name "scsi-hd", bus SCSI, desc "virtual SCSI disk"
-name "x3130-upstream", bus PCI, desc "TI X3130 Upstream Port of PCI Express Switch"
-name "xio3130-downstream", bus PCI, desc "TI X3130 Downstream Port of PCI Express Switch"
-name "i6300esb", bus PCI
-name "vmware-svga", bus PCI
-name "virtio-balloon-pci", bus PCI, alias "virtio-balloon"
-name "virtio-serial-pci", bus PCI, alias "virtio-serial"
-name "virtio-net-pci", bus PCI, alias "virtio-net"
-name "virtio-blk-pci", bus PCI, alias "virtio-blk"
-name "virtserialport", bus virtio-serial-bus
-name "virtconsole", bus virtio-serial-bus
-name "VGA", bus PCI
-name "isa-vga", bus ISA
-name "ich9-usb-uhci3", bus PCI
-name "ich9-usb-uhci2", bus PCI
-name "ich9-usb-uhci1", bus PCI
-name "vt82c686b-usb-uhci", bus PCI
-name "piix4-usb-uhci", bus PCI
-name "piix3-usb-uhci", bus PCI
-name "sysbus-ohci", bus System, desc "OHCI USB Controller"
-name "pci-ohci", bus PCI, desc "Apple USB Controller"
-name "ich9-usb-ehci1", bus PCI
-name "usb-ehci", bus PCI
-name "usb-ccid", bus USB, desc "CCID Rev 1.1 smartcard reader"
-name "isa-serial", bus ISA
-name "sb16", bus ISA, desc "Creative Sound Blaster 16"
-name "rtl8139", bus PCI
-name "pcnet", bus PCI
-name "isa-parallel", bus ISA
-name "ne2k_pci", bus PCI
-name "ne2k_isa", bus ISA
-name "lsi53c895a", bus PCI, alias "lsi"
-name "ioh3420", bus PCI, desc "Intel IOH device id 3420 PCIE Root Port"
-name "intel-hda", bus PCI, desc "Intel HD Audio Controller"
-name "ide-drive", bus IDE, desc "virtual IDE disk or CD-ROM (legacy)"
-name "ide-cd", bus IDE, desc "virtual IDE CD-ROM"
-name "ide-hd", bus IDE, desc "virtual IDE disk"
-name "isa-ide", bus ISA
-name "ich9-ahci", bus PCI, alias "ahci"
-name "hda-duplex", bus HDA, desc "HDA Audio Codec, duplex"
-name "hda-output", bus HDA, desc "HDA Audio Codec, output-only"
-name "SUNW,fdtwo", bus System
-name "sysbus-fdc", bus System
-name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
-name "i82801", bus PCI, desc "Intel i82801 Ethernet"
-name "i82562", bus PCI, desc "Intel i82562 Ethernet"
-name "i82559er", bus PCI, desc "Intel i82559ER Ethernet"
-name "i82559c", bus PCI, desc "Intel i82559C Ethernet"
-name "i82559b", bus PCI, desc "Intel i82559B Ethernet"
-name "i82559a", bus PCI, desc "Intel i82559A Ethernet"
-name "i82558b", bus PCI, desc "Intel i82558B Ethernet"
-name "i82558a", bus PCI, desc "Intel i82558A Ethernet"
-name "i82557c", bus PCI, desc "Intel i82557C Ethernet"
-name "i82557b", bus PCI, desc "Intel i82557B Ethernet"
-name "i82557a", bus PCI, desc "Intel i82557A Ethernet"
-name "i82551", bus PCI, desc "Intel i82551 Ethernet"
-name "i82550", bus PCI, desc "Intel i82550 Ethernet"
-name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
-name "ccid-card-passthru", bus ccid-bus, desc "passthrough smartcard"
-name "ccid-card-emulated", bus ccid-bus, desc "emulated smartcard"
-name "isa-applesmc", bus ISA
-name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
-virtio-blk-pci.class=hex32
-virtio-blk-pci.drive=drive
-virtio-blk-pci.logical_block_size=uint16
-virtio-blk-pci.physical_block_size=uint16
-virtio-blk-pci.min_io_size=uint16
-virtio-blk-pci.opt_io_size=uint32
-virtio-blk-pci.bootindex=int32
-virtio-blk-pci.discard_granularity=uint32
-virtio-blk-pci.serial=string
-virtio-blk-pci.ioeventfd=on/off
-virtio-blk-pci.vectors=uint32
-virtio-blk-pci.indirect_desc=on/off
-virtio-blk-pci.event_idx=on/off
-virtio-blk-pci.scsi=on/off
-virtio-blk-pci.addr=pci-devfn
-virtio-blk-pci.romfile=string
-virtio-blk-pci.rombar=uint32
-virtio-blk-pci.multifunction=on/off
-virtio-blk-pci.command_serr_enable=on/off
-virtio-net-pci.ioeventfd=on/off
-virtio-net-pci.vectors=uint32
-virtio-net-pci.indirect_desc=on/off
-virtio-net-pci.event_idx=on/off
-virtio-net-pci.csum=on/off
-virtio-net-pci.guest_csum=on/off
-virtio-net-pci.gso=on/off
-virtio-net-pci.guest_tso4=on/off
-virtio-net-pci.guest_tso6=on/off
-virtio-net-pci.guest_ecn=on/off
-virtio-net-pci.guest_ufo=on/off
-virtio-net-pci.host_tso4=on/off
-virtio-net-pci.host_tso6=on/off
-virtio-net-pci.host_ecn=on/off
-virtio-net-pci.host_ufo=on/off
-virtio-net-pci.mrg_rxbuf=on/off
-virtio-net-pci.status=on/off
-virtio-net-pci.ctrl_vq=on/off
-virtio-net-pci.ctrl_rx=on/off
-virtio-net-pci.ctrl_vlan=on/off
-virtio-net-pci.ctrl_rx_extra=on/off
-virtio-net-pci.mac=macaddr
-virtio-net-pci.vlan=vlan
-virtio-net-pci.netdev=netdev
-virtio-net-pci.bootindex=int32
-virtio-net-pci.x-txtimer=uint32
-virtio-net-pci.x-txburst=int32
-virtio-net-pci.tx=string
-virtio-net-pci.addr=pci-devfn
-virtio-net-pci.romfile=string
-virtio-net-pci.rombar=uint32
-virtio-net-pci.multifunction=on/off
-virtio-net-pci.command_serr_enable=on/off
-scsi-generic.drive=drive
-scsi-generic.logical_block_size=uint16
-scsi-generic.physical_block_size=uint16
-scsi-generic.min_io_size=uint16
-scsi-generic.opt_io_size=uint32
-scsi-generic.bootindex=int32
-scsi-generic.discard_granularity=uint32
-scsi-generic.channel=uint32
-scsi-generic.scsi-id=uint32
-scsi-generic.lun=uint32
diff --git a/tests/qemuhelpdata/qemu-1.1.0 b/tests/qemuhelpdata/qemu-1.1.0
deleted file mode 100644
index 43c189d2b8..0000000000
--- a/tests/qemuhelpdata/qemu-1.1.0
+++ /dev/null
@@ -1,269 +0,0 @@
-QEMU emulator version 1.1.0, Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu-system-x86_64 [options] [disk_image]
-
-'disk_image' is a raw hard disk image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--version display version information and exit
--machine [type=]name[,prop[=value][,...]]
- selects emulated machine (-machine ? for list)
- property accel=accel1[:accel2[:...]] selects accelerator
- supported accelerators are kvm, xen, tcg (default: tcg)
- kernel_irqchip=on|off controls accelerated irqchip support
- kvm_shadow_mem=size of KVM shadow MMU
--cpu cpu select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
- set the number of CPUs to 'n' [default=1]
- maxcpus= maximum number of total cpus, including
- offline CPUs for hotplug, etc
- cores= number of CPU cores on one socket
- threads= number of threads on one CPU core
- sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]
- [,serial=s][,addr=A][,id=name][,aio=threads|native]
- [,readonly=on|off][,copy-on-read=on|off]
- [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]
- use 'file' as a drive image
--set group.id.arg=value
- set <arg> parameter for item <id> of type <group>
- i.e. -set drive.$id.file=/path/to/image
--global driver.prop=value
- set a global default for a driver property
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
- [,splash=sp_name][,splash-time=sp_time]
- 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
- 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on
- 'sp_time': the period that splash picture last if menu=on, unit is ms
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--mem-path FILE provide backing storage for guest RAM
--mem-prealloc preallocate guest memory (use with -mem-path)
--k language use keyboard layout (for example 'fr' for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--balloon none disable balloon device
--balloon virtio[,addr=str]
- enable virtio balloon device (default)
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,prop[=value][,...]]
- add device (based on driver)
- prop=value,... sets driver properties
- use -device ? to print all possible drivers
- use -device driver,? to print all possible properties
-
-File system options:
--fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]
- [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
-
-Virtual File system pass-through options:
--virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]
- [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
--virtfs_synth Create synthetic file system image
-
--name string1[,process=string2]
- set the name of the guest
- string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]
- [,window_close=on|off]|curses|none|
- vnc=<display>[,<optargs>]
- select display type
--nographic disable graphical output and redirect serial I/Os to console
--curses use a curses/ncurses interface instead of SDL
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--spice <args> enable spice
--portrait rotate graphical output 90 deg left (only PXA LCD)
--rotate <deg> rotate graphical output some deg left (only PXA LCD)
--vga [std|cirrus|vmware|qxl|xenfb|none]
- select video card type
--full-screen start in full screen
--vnc display start a VNC server on display
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]
- ACPI table description
--smbios file=binary
- load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]
- [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
- [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
- connect the user mode network stack to VLAN 'n', configure its
- DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]
- connect the host TAP network interface to VLAN 'n'
- use network scripts 'file' (default=/etc/qemu-ifup)
- to configure it and 'dfile' (default=/etc/qemu-ifdown)
- to deconfigure it
- use '[down]script=no' to disable script execution
- use network helper 'helper' (default=/usr/libexec/qemu-bridge-helper) to
- configure it
- use 'fd=h' to connect to an already opened TAP interface
- use 'sndbuf=nbytes' to limit the size of the send buffer (the
- default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')
- use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag
- use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
- use vhost=on to enable experimental in kernel accelerator
- (only has effect for virtio guests which use MSIX)
- use vhostforce=on to force vhost on for non-MSIX virtio guests
- use 'vhostfd=h' to connect to an already opened vhost net device
--net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]
- connects a host TAP network interface to a host bridge device 'br'
- (default=br0) using the program 'helper'
- (default=/usr/libexec/qemu-bridge-helper)
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]]
- connect the vlan 'n' to multicast maddr and port
- use 'localaddr=addr' to specify the host address to send packets from
--net socket[,vlan=n][,name=str][,fd=h][,udp=host:port][,localaddr=host:port]
- connect the vlan 'n' to another VLAN using an UDP tunnel
--net dump[,vlan=n][,file=f][,len=n]
- dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none use it alone to have zero network devices. If no -net option
- is provided, the default is '-net nic -net user'
--netdev [user|tap|bridge|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id[,mux=on|off]
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
- [,server][,nowait][,telnet][,mux=on|off] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
- [,localport=localport][,ipv4][,ipv6][,mux=on|off]
--chardev msmouse,id=id[,mux=on|off]
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
- [,mux=on|off]
--chardev file,id=id,path=path[,mux=on|off]
--chardev pipe,id=id,path=path[,mux=on|off]
--chardev pty,id=id[,mux=on|off]
--chardev stdio,id=id[,mux=on|off][,signal=on|off]
--chardev braille,id=id[,mux=on|off]
--chardev tty,id=id,path=path[,mux=on|off]
--chardev parport,id=id,path=path[,mux=on|off]
--chardev spicevmc,id=id,name=name[,debug=debug]
-
--iscsi [user=user][,password=password]
- [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE
- [,initiator-name=iqn]
- iSCSI session parameters
-Bluetooth(R) options:
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
--dtb file use 'file' as device tree image
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--qmp dev like -monitor but opens in 'control' mode
--mon chardev=[name][,mode=readline|control][,default]
--debugcon dev redirect the debug console to char device 'dev'
--pidfile file write PID to 'file'
--singlestep always run in singlestep mode
--S freeze CPU at startup (use 'c' to start execution)
--gdb dev wait for gdb connection on 'dev'
--s shorthand for -gdb tcp::1234
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--D logfile output log to logfile (instead of the default /tmp/qemu.log)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually QEMU can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--enable-kvm enable KVM full virtualization support
--xen-domid id specify xen guest domain id
--xen-create create domain using xen hypercalls, bypassing xend
- warning: should not be used when xend is in use
--xen-attach attach to existing xen domain
- xend will use this when starting QEMU
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]
- set the RTC base and clock, enable drift fix for clock ticks (x86 only)
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per
- instruction
--watchdog i6300esb|ib700
- enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
- action when watchdog fires [default=reset]
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--nodefaults don't create default devices
--chroot dir chroot to dir just before starting the VM
--runas user change to user id user just before starting the VM
--readconfig <file>
--writeconfig <file>
- read/write config file
--nodefconfig
- do not load default config files at startup
--no-user-config
- do not load user-provided config files at startup
--trace [events=<file>][,file=<file>]
- specify tracing options
--qtest CHR specify tracing options
--qtest-log LOG specify tracing options
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-1.1.0-device b/tests/qemuhelpdata/qemu-1.1.0-device
deleted file mode 100644
index 218690662a..0000000000
--- a/tests/qemuhelpdata/qemu-1.1.0-device
+++ /dev/null
@@ -1,170 +0,0 @@
-name "usb-storage", bus USB
-name "VGA", bus PCI
-name "scsi-hd", bus SCSI, desc "virtual SCSI disk"
-name "i82559a", bus PCI, desc "Intel i82559A Ethernet"
-name "i82559b", bus PCI, desc "Intel i82559B Ethernet"
-name "i82559c", bus PCI, desc "Intel i82559C Ethernet"
-name "sysbus-ohci", bus System, desc "OHCI USB Controller"
-name "virtio-blk-pci", bus PCI, alias "virtio-blk"
-name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)"
-name "x3130-upstream", bus PCI, desc "TI X3130 Upstream Port of PCI Express Switch"
-name "ide-drive", bus IDE, desc "virtual IDE disk or CD-ROM (legacy)"
-name "virtio-9p-pci", bus PCI
-name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
-name "ide-hd", bus IDE, desc "virtual IDE disk"
-name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
-name "ioh3420", bus PCI, desc "Intel IOH device id 3420 PCIE Root Port"
-name "sga", bus ISA, desc "Serial Graphics Adapter"
-name "scsi-block", bus SCSI, desc "SCSI block device passthrough"
-name "usb-serial", bus USB
-name "pc-sysfw", bus System, desc "PC System Firmware"
-name "usb-mouse", bus USB
-name "usb-hub", bus USB
-name "usb-net", bus USB
-name "ccid-card-emulated", bus ccid-bus, desc "emulated smartcard"
-name "ne2k_isa", bus ISA
-name "scsi-generic", bus SCSI, desc "pass through generic scsi device (/dev/sg*)"
-name "pcnet", bus PCI
-name "lsi53c895a", bus PCI, alias "lsi"
-name "scsi-disk", bus SCSI, desc "virtual SCSI disk or CD-ROM (legacy)"
-name "hda-micro", bus HDA, desc "HDA Audio Codec, duplex (speaker, microphone)"
-name "xio3130-downstream", bus PCI, desc "TI X3130 Downstream Port of PCI Express Switch"
-name "virtserialport", bus virtio-serial-bus
-name "nec-usb-xhci", bus PCI
-name "pci-ohci", bus PCI, desc "Apple USB Controller"
-name "usb-braille", bus USB
-name "scsi-cd", bus SCSI, desc "virtual SCSI CD-ROM"
-name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet"
-name "isa-serial", bus ISA
-name "i82550", bus PCI, desc "Intel i82550 Ethernet"
-name "i82551", bus PCI, desc "Intel i82551 Ethernet"
-name "isa-debugcon", bus ISA
-name "ide-cd", bus IDE, desc "virtual IDE CD-ROM"
-name "SUNW,fdtwo", bus System
-name "ich9-usb-uhci1", bus PCI
-name "ich9-usb-uhci2", bus PCI
-name "ich9-usb-uhci3", bus PCI
-name "isa-parallel", bus ISA
-name "virtconsole", bus virtio-serial-bus
-name "ne2k_pci", bus PCI
-name "virtio-serial-pci", bus PCI, alias "virtio-serial"
-name "hda-duplex", bus HDA, desc "HDA Audio Codec, duplex (line-out, line-in)"
-name "intel-hda", bus PCI, desc "Intel HD Audio Controller"
-name "i82559er", bus PCI, desc "Intel i82559ER Ethernet"
-name "hda-output", bus HDA, desc "HDA Audio Codec, output-only (line-out)"
-name "i82562", bus PCI, desc "Intel i82562 Ethernet"
-name "sysbus-ahci", bus System
-name "usb-ccid", bus USB, desc "CCID Rev 1.1 smartcard reader"
-name "ivshmem", bus PCI
-name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
-name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
-name "sysbus-fdc", bus System
-name "usb-bt-dongle", bus USB
-name "usb-tablet", bus USB
-name "isa-vga", bus ISA
-name "usb-kbd", bus USB
-name "isa-applesmc", bus ISA
-name "rtl8139", bus PCI
-name "qxl", bus PCI, desc "Spice QXL GPU (secondary)"
-name "i82557a", bus PCI, desc "Intel i82557A Ethernet"
-name "i82557b", bus PCI, desc "Intel i82557B Ethernet"
-name "i82557c", bus PCI, desc "Intel i82557C Ethernet"
-name "usb-audio", bus USB
-name "piix3-usb-uhci", bus PCI
-name "ccid-card-passthru", bus ccid-bus, desc "passthrough smartcard"
-name "ib700", bus ISA
-name "i82801", bus PCI, desc "Intel i82801 Ethernet"
-name "smbus-eeprom", bus I2C
-name "vmware-svga", bus PCI
-name "isa-cirrus-vga", bus ISA
-name "piix4-usb-uhci", bus PCI
-name "sb16", bus ISA, desc "Creative Sound Blaster 16"
-name "pci-bridge", bus PCI, desc "Standard PCI Bridge"
-name "usb-ehci", bus PCI
-name "i82558a", bus PCI, desc "Intel i82558A Ethernet"
-name "i82558b", bus PCI, desc "Intel i82558B Ethernet"
-name "virtio-net-pci", bus PCI, alias "virtio-net"
-name "virtio-balloon-pci", bus PCI, alias "virtio-balloon"
-name "ich9-usb-ehci1", bus PCI
-name "isa-ide", bus ISA
-name "i6300esb", bus PCI
-name "ich9-ahci", bus PCI, alias "ahci"
-name "usb-host", bus USB
-name "vt82c686b-usb-uhci", bus PCI
-name "virtio-scsi-pci", bus PCI
-virtio-blk-pci.class=hex32
-virtio-blk-pci.drive=drive
-virtio-blk-pci.logical_block_size=blocksize
-virtio-blk-pci.physical_block_size=blocksize
-virtio-blk-pci.min_io_size=uint16
-virtio-blk-pci.opt_io_size=uint32
-virtio-blk-pci.bootindex=int32
-virtio-blk-pci.discard_granularity=uint32
-virtio-blk-pci.serial=string
-virtio-blk-pci.scsi=on/off
-virtio-blk-pci.ioeventfd=on/off
-virtio-blk-pci.vectors=uint32
-virtio-blk-pci.indirect_desc=on/off
-virtio-blk-pci.event_idx=on/off
-virtio-blk-pci.addr=pci-devfn
-virtio-blk-pci.romfile=string
-virtio-blk-pci.rombar=uint32
-virtio-blk-pci.multifunction=on/off
-virtio-blk-pci.command_serr_enable=on/off
-virtio-net-pci.ioeventfd=on/off
-virtio-net-pci.vectors=uint32
-virtio-net-pci.indirect_desc=on/off
-virtio-net-pci.event_idx=on/off
-virtio-net-pci.csum=on/off
-virtio-net-pci.guest_csum=on/off
-virtio-net-pci.gso=on/off
-virtio-net-pci.guest_tso4=on/off
-virtio-net-pci.guest_tso6=on/off
-virtio-net-pci.guest_ecn=on/off
-virtio-net-pci.guest_ufo=on/off
-virtio-net-pci.host_tso4=on/off
-virtio-net-pci.host_tso6=on/off
-virtio-net-pci.host_ecn=on/off
-virtio-net-pci.host_ufo=on/off
-virtio-net-pci.mrg_rxbuf=on/off
-virtio-net-pci.status=on/off
-virtio-net-pci.ctrl_vq=on/off
-virtio-net-pci.ctrl_rx=on/off
-virtio-net-pci.ctrl_vlan=on/off
-virtio-net-pci.ctrl_rx_extra=on/off
-virtio-net-pci.mac=macaddr
-virtio-net-pci.vlan=vlan
-virtio-net-pci.netdev=netdev
-virtio-net-pci.bootindex=int32
-virtio-net-pci.x-txtimer=uint32
-virtio-net-pci.x-txburst=int32
-virtio-net-pci.tx=string
-virtio-net-pci.addr=pci-devfn
-virtio-net-pci.romfile=string
-virtio-net-pci.rombar=uint32
-virtio-net-pci.multifunction=on/off
-virtio-net-pci.command_serr_enable=on/off
-scsi-disk.drive=drive
-scsi-disk.logical_block_size=blocksize
-scsi-disk.physical_block_size=blocksize
-scsi-disk.min_io_size=uint16
-scsi-disk.opt_io_size=uint32
-scsi-disk.bootindex=int32
-scsi-disk.discard_granularity=uint32
-scsi-disk.ver=string
-scsi-disk.serial=string
-scsi-disk.removable=on/off
-scsi-disk.dpofua=on/off
-scsi-disk.channel=uint32
-scsi-disk.scsi-id=uint32
-scsi-disk.lun=uint32
-scsi-generic.drive=drive
-scsi-generic.logical_block_size=blocksize
-scsi-generic.physical_block_size=blocksize
-scsi-generic.min_io_size=uint16
-scsi-generic.opt_io_size=uint32
-scsi-generic.bootindex=int32
-scsi-generic.discard_granularity=uint32
-scsi-generic.channel=uint32
-scsi-generic.scsi-id=uint32
-scsi-generic.lun=uint32
diff --git a/tests/qemuhelpdata/qemu-1.2.0 b/tests/qemuhelpdata/qemu-1.2.0
deleted file mode 100644
index 32a243192b..0000000000
--- a/tests/qemuhelpdata/qemu-1.2.0
+++ /dev/null
@@ -1,272 +0,0 @@
-QEMU emulator version 1.2.0, Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu-system-x86_64 [options] [disk_image]
-
-'disk_image' is a raw hard disk image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--version display version information and exit
--machine [type=]name[,prop[=value][,...]]
- selects emulated machine (-machine ? for list)
- property accel=accel1[:accel2[:...]] selects accelerator
- supported accelerators are kvm, xen, tcg (default: tcg)
- kernel_irqchip=on|off controls accelerated irqchip support
- kvm_shadow_mem=size of KVM shadow MMU
- dump-guest-core=on|off include guest memory in a core dump (default=on)
--cpu cpu select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
- set the number of CPUs to 'n' [default=1]
- maxcpus= maximum number of total cpus, including
- offline CPUs for hotplug, etc
- cores= number of CPU cores on one socket
- threads= number of threads on one CPU core
- sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]
- [,serial=s][,addr=A][,id=name][,aio=threads|native]
- [,readonly=on|off][,copy-on-read=on|off]
- [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]
- use 'file' as a drive image
--set group.id.arg=value
- set <arg> parameter for item <id> of type <group>
- i.e. -set drive.$id.file=/path/to/image
--global driver.prop=value
- set a global default for a driver property
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
- [,splash=sp_name][,splash-time=sp_time]
- 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
- 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on
- 'sp_time': the period that splash picture last if menu=on, unit is ms
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--mem-path FILE provide backing storage for guest RAM
--mem-prealloc preallocate guest memory (use with -mem-path)
--k language use keyboard layout (for example 'fr' for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--balloon none disable balloon device
--balloon virtio[,addr=str]
- enable virtio balloon device (default)
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,prop[=value][,...]]
- add device (based on driver)
- prop=value,... sets driver properties
- use -device ? to print all possible drivers
- use -device driver,? to print all possible properties
-
-File system options:
--fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]
- [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
-
-Virtual File system pass-through options:
--virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]
- [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
--virtfs_synth Create synthetic file system image
-
--name string1[,process=string2]
- set the name of the guest
- string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]
- [,window_close=on|off]|curses|none|
- vnc=<display>[,<optargs>]
- select display type
--nographic disable graphical output and redirect serial I/Os to console
--curses use a curses/ncurses interface instead of SDL
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--spice <args> enable spice
--portrait rotate graphical output 90 deg left (only PXA LCD)
--rotate <deg> rotate graphical output some deg left (only PXA LCD)
--vga [std|cirrus|vmware|qxl|xenfb|none]
- select video card type
--full-screen start in full screen
--vnc display start a VNC server on display
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]
- ACPI table description
--smbios file=binary
- load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]
- [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
- [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
- connect the user mode network stack to VLAN 'n', configure its
- DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]
- connect the host TAP network interface to VLAN 'n'
- use network scripts 'file' (default=/etc/qemu-ifup)
- to configure it and 'dfile' (default=/etc/qemu-ifdown)
- to deconfigure it
- use '[down]script=no' to disable script execution
- use network helper 'helper' (default=/usr/local/libexec/qemu-bridge-helper) to
- configure it
- use 'fd=h' to connect to an already opened TAP interface
- use 'sndbuf=nbytes' to limit the size of the send buffer (the
- default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')
- use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag
- use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
- use vhost=on to enable experimental in kernel accelerator
- (only has effect for virtio guests which use MSIX)
- use vhostforce=on to force vhost on for non-MSIX virtio guests
- use 'vhostfd=h' to connect to an already opened vhost net device
--net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]
- connects a host TAP network interface to a host bridge device 'br'
- (default=br0) using the program 'helper'
- (default=/usr/local/libexec/qemu-bridge-helper)
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]]
- connect the vlan 'n' to multicast maddr and port
- use 'localaddr=addr' to specify the host address to send packets from
--net socket[,vlan=n][,name=str][,fd=h][,udp=host:port][,localaddr=host:port]
- connect the vlan 'n' to another VLAN using an UDP tunnel
--net dump[,vlan=n][,file=f][,len=n]
- dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none use it alone to have zero network devices. If no -net option
- is provided, the default is '-net nic -net user'
--netdev [user|tap|bridge|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id[,mux=on|off]
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
- [,server][,nowait][,telnet][,mux=on|off] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
- [,localport=localport][,ipv4][,ipv6][,mux=on|off]
--chardev msmouse,id=id[,mux=on|off]
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
- [,mux=on|off]
--chardev file,id=id,path=path[,mux=on|off]
--chardev pipe,id=id,path=path[,mux=on|off]
--chardev pty,id=id[,mux=on|off]
--chardev stdio,id=id[,mux=on|off][,signal=on|off]
--chardev braille,id=id[,mux=on|off]
--chardev tty,id=id,path=path[,mux=on|off]
--chardev parport,id=id,path=path[,mux=on|off]
--chardev spicevmc,id=id,name=name[,debug=debug]
-
--iscsi [user=user][,password=password]
- [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE
- [,initiator-name=iqn]
- iSCSI session parameters
-Bluetooth(R) options:
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
--dtb file use 'file' as device tree image
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--qmp dev like -monitor but opens in 'control' mode
--mon chardev=[name][,mode=readline|control][,default]
--debugcon dev redirect the debug console to char device 'dev'
--pidfile file write PID to 'file'
--singlestep always run in singlestep mode
--S freeze CPU at startup (use 'c' to start execution)
--gdb dev wait for gdb connection on 'dev'
--s shorthand for -gdb tcp::1234
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--D logfile output log to logfile (instead of the default /tmp/qemu.log)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually QEMU can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--enable-kvm enable KVM full virtualization support
--xen-domid id specify xen guest domain id
--xen-create create domain using xen hypercalls, bypassing xend
- warning: should not be used when xend is in use
--xen-attach attach to existing xen domain
- xend will use this when starting QEMU
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]
- set the RTC base and clock, enable drift fix for clock ticks (x86 only)
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per
- instruction
--watchdog i6300esb|ib700
- enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
- action when watchdog fires [default=reset]
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--nodefaults don't create default devices
--chroot dir chroot to dir just before starting the VM
--runas user change to user id user just before starting the VM
--sandbox <arg> Enable seccomp mode 2 system call filter (default 'off').
--readconfig <file>
--writeconfig <file>
- read/write config file
--nodefconfig
- do not load default config files at startup
--no-user-config
- do not load user-provided config files at startup
--trace [events=<file>][,file=<file>]
- specify tracing options
--qtest CHR specify tracing options
--qtest-log LOG specify tracing options
--enable-fips enable FIPS 140-2 compliance
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.3 b/tests/qemuhelpdata/qemu-kvm-0.12.3
deleted file mode 100644
index 268d36fbe1..0000000000
--- a/tests/qemuhelpdata/qemu-kvm-0.12.3
+++ /dev/null
@@ -1,215 +0,0 @@
-QEMU PC emulator version 0.12.3 (qemu-kvm-0.12.3), Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard image image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--version display version information and exit
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
- set the number of CPUs to 'n' [default=1]
- maxcpus= maximum number of total cpus, including
- offline CPUs for hotplug etc.
- cores= number of CPU cores on one socket
- threads= number of threads on one CPU core
- sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none][,format=f][,serial=s]
- [,addr=A][,id=name][,aio=threads|native]
- [,boot=on|off]
- use 'file' as a drive image
--set group.id.arg=value
- set <arg> parameter for item <id> of type <group>
- i.e. -set drive.$id.file=/path/to/image
--global driver.property=value
- set a global default for a driver property
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
- 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--k language use keyboard layout (for example 'fr' for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,options] add device
--name string1[,process=string2] set the name of the guest
- string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--nographic disable graphical output and redirect serial I/Os to console
--curses use a curses/ncurses interface instead of SDL
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--portrait rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|xenfb|none]
- select video card type
--full-screen start in full screen
--vnc display start a VNC server on display
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--balloon none disable balloon device
--balloon virtio[,addr=str]
- enable virtio balloon device (default)
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
- ACPI table description
--smbios file=binary
- Load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- Specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- Specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n]
- [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
- [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
- connect the user mode network stack to VLAN 'n', configure its
- DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown);
- use '[down]script=no' to disable script execution;
- use 'fd=h' to connect to an already opened TAP interface
- use 'sndbuf=nbytes' to limit the size of the send buffer; the
- default of 'sndbuf=1048576' can be disabled using 'sndbuf=0'
- use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag; use
- vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net dump[,vlan=n][,file=f][,len=n]
- dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none use it alone to have zero network devices; if no -net option
- is provided, the default is '-net nic -net user'
--netdev [user|tap|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
- [,server][,nowait][,telnet] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
- [,localport=localport][,ipv4][,ipv6]
--chardev msmouse,id=id
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
--chardev file,id=id,path=path
--chardev pipe,id=id,path=path
--chardev pty,id=id
--chardev stdio,id=id
--chardev tty,id=id,path=path
--chardev parport,id=id,path=path
-
-Bluetooth(R) options:
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--qmp dev like -monitor but opens in 'control' mode.
--mon chardev=[name][,mode=readline|control][,default]
--pidfile file write PID to 'file'
--singlestep always run in singlestep mode
--S freeze CPU at startup (use 'c' to start execution)
--gdb dev wait for gdb connection on 'dev'
--s shorthand for -gdb tcp::1234
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--enable-kvm enable KVM full virtualization support
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew]
- set the RTC base and clock, enable drift fix for clock ticks
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per
- instruction
--watchdog i6300esb|ib700
- enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
- action when watchdog fires [default=reset]
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--nodefaults don't create default devices.
--chroot dir Chroot to dir just before starting the VM.
--runas user Change to user id user just before starting the VM.
--readconfig <file>
--writeconfig <file>
- read/write config file
--no-kvm disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit disable KVM kernel mode PIT
--no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection
--pcidevice host=bus:dev.func[,dma=none][,name=string]
- expose a PCI device to the guest OS.
- dma=none: don't perform any dma translations (default is to use an iommu)
- 'string' is used in log output.
--enable-nesting enable support for running a VM inside the VM (AMD only)
--nvram FILE provide ia64 nvram contents
--tdf enable guest time drift compensation
--kvm-shadow-memory MEGABYTES
- allocate MEGABYTES for kvm mmu shadowing
--mem-path FILE provide backing storage for guest RAM
--mem-prealloc preallocate guest memory (use with -mempath)
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.3-device b/tests/qemuhelpdata/qemu-kvm-0.12.3-device
deleted file mode 100644
index 814dcaf74d..0000000000
--- a/tests/qemuhelpdata/qemu-kvm-0.12.3-device
+++ /dev/null
@@ -1,63 +0,0 @@
-name "pci-bridge", bus PCI
-name "virtio-balloon-pci", bus PCI
-name "virtio-console-pci", bus PCI
-name "virtio-net-pci", bus PCI
-name "virtio-blk-pci", bus PCI
-name "i82562", bus PCI
-name "i82559er", bus PCI
-name "i82559c", bus PCI
-name "i82559b", bus PCI
-name "i82559a", bus PCI
-name "i82558b", bus PCI
-name "i82558a", bus PCI
-name "i82557c", bus PCI
-name "i82557b", bus PCI
-name "i82557a", bus PCI
-name "i82551", bus PCI
-name "i82550", bus PCI
-name "pcnet", bus PCI
-name "rtl8139", bus PCI
-name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
-name "ide-drive", bus IDE
-name "isa-ide", bus ISA
-name "piix4-ide", bus PCI, no-user
-name "piix3-ide", bus PCI, no-user
-name "i8042", bus ISA, no-user
-name "sb16", bus ISA, desc "Creative Sound Blaster 16"
-name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
-name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
-name "VGA", bus PCI
-name "SUNW,fdtwo", bus System
-name "sysbus-fdc", bus System
-name "isa-fdc", bus ISA, no-user
-name "mc146818rtc", bus ISA, no-user
-name "isa-serial", bus ISA
-name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
-name "isa-parallel", bus ISA
-name "PIIX3", bus PCI, desc "ISA bridge", no-user
-name "i440FX", bus PCI, desc "Host bridge", no-user
-name "i440FX-pcihost", bus System, no-user
-name "piix4-usb-uhci", bus PCI
-name "piix3-usb-uhci", bus PCI
-name "vmware-svga", bus PCI
-name "ib700", bus ISA
-name "ne2k_isa", bus ISA
-name "testdev", bus ISA
-name "smbus-eeprom", bus I2C
-name "scsi-disk", bus SCSI, desc "virtual scsi disk or cdrom"
-name "scsi-generic", bus SCSI, desc "pass through generic scsi device (/dev/sg*)"
-name "usb-hub", bus USB
-name "usb-host", bus USB
-name "usb-kbd", bus USB
-name "usb-mouse", bus USB
-name "usb-tablet", bus USB
-name "usb-storage", bus USB
-name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet"
-name "usb-braille", bus USB
-name "usb-serial", bus USB
-name "usb-net", bus USB
-name "usb-bt-dongle", bus USB
-name "i6300esb", bus PCI
-name "ne2k_pci", bus PCI
-name "lsi53c895a", bus PCI, alias "lsi"
-name "isabus-bridge", bus System, no-user
diff --git a/tests/qemuhelpdata/qemu-kvm-0.13.0 b/tests/qemuhelpdata/qemu-kvm-0.13.0
deleted file mode 100644
index af29d11f7d..0000000000
--- a/tests/qemuhelpdata/qemu-kvm-0.13.0
+++ /dev/null
@@ -1,242 +0,0 @@
-QEMU emulator version 0.13.0 (qemu-kvm-0.13.0), Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu [options] [disk_image]
-
-'disk_image' is a raw hard disk image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--version display version information and exit
--M machine select emulated machine (-M ? for list)
--cpu cpu select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
- set the number of CPUs to 'n' [default=1]
- maxcpus= maximum number of total cpus, including
- offline CPUs for hotplug, etc
- cores= number of CPU cores on one socket
- threads= number of threads on one CPU core
- sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none|unsafe][,format=f]
- [,serial=s][,addr=A][,id=name][,aio=threads|native]
- [,readonly=on|off][,boot=on|off]
- use 'file' as a drive image
--set group.id.arg=value
- set <arg> parameter for item <id> of type <group>
- i.e. -set drive.$id.file=/path/to/image
--global driver.property=value
- set a global default for a driver property
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
- 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--mem-path FILE provide backing storage for guest RAM
--mem-prealloc preallocate guest memory (use with -mem-path)
--k language use keyboard layout (for example 'fr' for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,prop[=value][,...]]
- add device (based on driver)
- prop=value,... sets driver properties
- use -device ? to print all possible drivers
- use -device driver,? to print all possible properties
-File system options:
--fsdev local,id=id,path=path,security_model=[mapped|passthrough]
-Virtual File system pass-through options:
--virtfs local,path=path,mount_tag=tag,security_model=[mapped|passthrough]
-
--name string1[,process=string2]
- set the name of the guest
- string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--nographic disable graphical output and redirect serial I/Os to console
--curses use a curses/ncurses interface instead of SDL
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--portrait rotate graphical output 90 deg left (only PXA LCD)
--vga [std|cirrus|vmware|xenfb|none]
- select video card type
--full-screen start in full screen
--g WxH[xDEPTH] Set the initial graphical resolution and depth
--vnc display start a VNC server on display
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--balloon none disable balloon device
--balloon virtio[,addr=str]
- enable virtio balloon device (default)
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
- ACPI table description
--smbios file=binary
- load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n]
- [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
- [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
- connect the user mode network stack to VLAN 'n', configure its
- DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h]
- connect the host TAP network interface to VLAN 'n' and use the
- network scripts 'file' (default=/etc/qemu-ifup)
- and 'dfile' (default=/etc/qemu-ifdown)
- use '[down]script=no' to disable script execution
- use 'fd=h' to connect to an already opened TAP interface
- use 'sndbuf=nbytes' to limit the size of the send buffer (the
- default of 'sndbuf=1048576' can be disabled using 'sndbuf=0')
- use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag
- use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
- use vhost=on to enable experimental in kernel accelerator
- use 'vhostfd=h' to connect to an already opened vhost net device
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port]
- connect the vlan 'n' to multicast maddr and port
--net dump[,vlan=n][,file=f][,len=n]
- dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none use it alone to have zero network devices. If no -net option
- is provided, the default is '-net nic -net user'
--netdev [user|tap|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id[,mux=on|off]
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
- [,server][,nowait][,telnet][,mux=on|off] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
- [,localport=localport][,ipv4][,ipv6][,mux=on|off]
--chardev msmouse,id=id[,mux=on|off]
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
- [,mux=on|off]
--chardev file,id=id,path=path[,mux=on|off]
--chardev pipe,id=id,path=path[,mux=on|off]
--chardev pty,id=id[,mux=on|off]
--chardev stdio,id=id[,mux=on|off][,signal=on|off]
--chardev tty,id=id,path=path[,mux=on|off]
--chardev parport,id=id,path=path[,mux=on|off]
-
-Bluetooth(R) options:
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--qmp dev like -monitor but opens in 'control' mode
--mon chardev=[name][,mode=readline|control][,default]
--debugcon dev redirect the debug console to char device 'dev'
--pidfile file write PID to 'file'
--singlestep always run in singlestep mode
--S freeze CPU at startup (use 'c' to start execution)
--gdb dev wait for gdb connection on 'dev'
--s shorthand for -gdb tcp::1234
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually qemu can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--enable-kvm enable KVM full virtualization support
--xen-domid id specify xen guest domain id
--xen-create create domain using xen hypercalls, bypassing xend
- warning: should not be used when xend is in use
--xen-attach attach to existing xen domain
- xend will use this when starting qemu
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew]
- set the RTC base and clock, enable drift fix for clock ticks (x86 only)
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per
- instruction
--watchdog i6300esb|ib700
- enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
- action when watchdog fires [default=reset]
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--nodefaults don't create default devices
--chroot dir chroot to dir just before starting the VM
--runas user change to user id user just before starting the VM
--prom-env variable=value
- set OpenBIOS nvram variables
--semihosting semihosting mode
--old-param old param mode
--readconfig <file>
--writeconfig <file>
- read/write config file
--nodefconfig
- do not load default config files at startup
--no-kvm disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit disable KVM kernel mode PIT
--no-kvm-pit-reinjection
- disable KVM kernel mode PIT interrupt reinjection
--pcidevice host=[seg:]bus:dev.func[,dma=none][,name=string]
- expose a PCI device to the guest OS
- dma=none: don't perform any dma translations (default is to use an iommu)
- 'string' is used in log output
--enable-nesting enable support for running a VM inside the VM (AMD only)
--nvram FILE provide ia64 nvram contents
--tdf enable guest time drift compensation
--kvm-shadow-memory MEGABYTES
- allocate MEGABYTES for kvm mmu shadowing
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-kvm-0.13.0-device b/tests/qemuhelpdata/qemu-kvm-0.13.0-device
deleted file mode 100644
index 6dd2d09c56..0000000000
--- a/tests/qemuhelpdata/qemu-kvm-0.13.0-device
+++ /dev/null
@@ -1,90 +0,0 @@
-name "pci-bridge", bus PCI
-name "virtio-balloon-pci", bus PCI
-name "virtio-serial-pci", bus PCI, alias "virtio-serial"
-name "virtio-net-pci", bus PCI
-name "virtio-blk-pci", bus PCI
-name "sysbus-ohci", bus System, desc "OHCI USB Controller"
-name "pci-ohci", bus PCI, desc "Apple USB Controller"
-name "rtl8139", bus PCI
-name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
-name "ivshmem", bus PCI
-name "smbus-eeprom", bus I2C
-name "scsi-disk", bus SCSI, desc "virtual scsi disk or cdrom"
-name "scsi-generic", bus SCSI, desc "pass through generic scsi device (/dev/sg*)"
-name "usb-hub", bus USB
-name "usb-host", bus USB
-name "usb-kbd", bus USB
-name "usb-mouse", bus USB
-name "usb-tablet", bus USB
-name "usb-storage", bus USB
-name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet"
-name "usb-braille", bus USB
-name "usb-serial", bus USB
-name "usb-net", bus USB
-name "usb-bt-dongle", bus USB
-name "virtserialport", bus virtio-serial-bus
-name "virtconsole", bus virtio-serial-bus
-name "isa-serial", bus ISA
-name "isa-parallel", bus ISA
-name "vt82c686b-usb-uhci", bus PCI
-name "piix4-usb-uhci", bus PCI
-name "piix3-usb-uhci", bus PCI
-name "SUNW,fdtwo", bus System
-name "sysbus-fdc", bus System
-name "i6300esb", bus PCI
-name "ne2k_pci", bus PCI
-name "i82801", bus PCI, desc "Intel i82801 Ethernet"
-name "i82562", bus PCI, desc "Intel i82562 Ethernet"
-name "i82559er", bus PCI, desc "Intel i82559ER Ethernet"
-name "i82559c", bus PCI, desc "Intel i82559C Ethernet"
-name "i82559b", bus PCI, desc "Intel i82559B Ethernet"
-name "i82559a", bus PCI, desc "Intel i82559A Ethernet"
-name "i82558b", bus PCI, desc "Intel i82558B Ethernet"
-name "i82558a", bus PCI, desc "Intel i82558A Ethernet"
-name "i82557c", bus PCI, desc "Intel i82557C Ethernet"
-name "i82557b", bus PCI, desc "Intel i82557B Ethernet"
-name "i82557a", bus PCI, desc "Intel i82557A Ethernet"
-name "i82551", bus PCI, desc "Intel i82551 Ethernet"
-name "i82550", bus PCI, desc "Intel i82550 Ethernet"
-name "pcnet", bus PCI
-name "ne2k_isa", bus ISA
-name "ide-drive", bus IDE
-name "isa-ide", bus ISA
-name "lsi53c895a", bus PCI, alias "lsi"
-name "VGA", bus PCI
-name "vmware-svga", bus PCI
-name "sb16", bus ISA, desc "Creative Sound Blaster 16"
-name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
-name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
-name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
-name "isa-applesmc", bus ISA
-name "ib700", bus ISA
-name "isa-debugcon", bus ISA
-name "testdev", bus ISA
-name "PIIX4_PM", bus PCI, desc "PM"
-name "pci-assign", bus PCI, desc "pass through host pci devices to the guest"
-pci-assign.host=pci-hostaddr
-pci-assign.iommu=uint32
-pci-assign.configfd=string
-virtio-net-pci.vectors=uint32
-virtio-net-pci.indirect_desc=on/off
-virtio-net-pci.csum=on/off
-virtio-net-pci.guest_csum=on/off
-virtio-net-pci.gso=on/off
-virtio-net-pci.guest_tso4=on/off
-virtio-net-pci.guest_tso6=on/off
-virtio-net-pci.guest_ecn=on/off
-virtio-net-pci.guest_ufo=on/off
-virtio-net-pci.host_tso4=on/off
-virtio-net-pci.host_tso6=on/off
-virtio-net-pci.host_ecn=on/off
-virtio-net-pci.host_ufo=on/off
-virtio-net-pci.mrg_rxbuf=on/off
-virtio-net-pci.status=on/off
-virtio-net-pci.ctrl_vq=on/off
-virtio-net-pci.ctrl_rx=on/off
-virtio-net-pci.ctrl_vlan=on/off
-virtio-net-pci.ctrl_rx_extra=on/off
-virtio-net-pci.mac=macaddr
-virtio-net-pci.vlan=vlan
-virtio-net-pci.netdev=netdev
diff --git a/tests/qemuhelpdata/qemu-kvm-1.2.0 b/tests/qemuhelpdata/qemu-kvm-1.2.0
deleted file mode 100644
index 08c3f9362f..0000000000
--- a/tests/qemuhelpdata/qemu-kvm-1.2.0
+++ /dev/null
@@ -1,277 +0,0 @@
-QEMU emulator version 1.2.0 (qemu-kvm-devel), Copyright (c) 2003-2008 Fabrice Bellard
-usage: qemu-system-x86_64 [options] [disk_image]
-
-'disk_image' is a raw hard disk image for IDE hard disk 0
-
-Standard options:
--h or -help display this help and exit
--version display version information and exit
--machine [type=]name[,prop[=value][,...]]
- selects emulated machine (-machine ? for list)
- property accel=accel1[:accel2[:...]] selects accelerator
- supported accelerators are kvm, xen, tcg (default: tcg)
- kernel_irqchip=on|off controls accelerated irqchip support
- kvm_shadow_mem=size of KVM shadow MMU
- dump-guest-core=on|off include guest memory in a core dump (default=on)
--cpu cpu select CPU (-cpu ? for list)
--smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
- set the number of CPUs to 'n' [default=1]
- maxcpus= maximum number of total cpus, including
- offline CPUs for hotplug, etc
- cores= number of CPU cores on one socket
- threads= number of threads on one CPU core
- sockets= number of discrete sockets in the system
--numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
--fda/-fdb file use 'file' as floppy disk 0/1 image
--hda/-hdb file use 'file' as IDE hard disk 0/1 image
--hdc/-hdd file use 'file' as IDE hard disk 2/3 image
--cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
--drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
- [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
- [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]
- [,serial=s][,addr=A][,id=name][,aio=threads|native]
- [,readonly=on|off][,copy-on-read=on|off]
- [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]
- use 'file' as a drive image
--set group.id.arg=value
- set <arg> parameter for item <id> of type <group>
- i.e. -set drive.$id.file=/path/to/image
--global driver.prop=value
- set a global default for a driver property
--mtdblock file use 'file' as on-board Flash memory image
--sd file use 'file' as SecureDigital card image
--pflash file use 'file' as a parallel flash image
--boot [order=drives][,once=drives][,menu=on|off]
- [,splash=sp_name][,splash-time=sp_time]
- 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
- 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on
- 'sp_time': the period that splash picture last if menu=on, unit is ms
--snapshot write to temporary files instead of disk image files
--m megs set virtual RAM size to megs MB [default=128]
--mem-path FILE provide backing storage for guest RAM
--mem-prealloc preallocate guest memory (use with -mem-path)
--k language use keyboard layout (for example 'fr' for French)
--audio-help print list of audio drivers and their options
--soundhw c1,... enable audio support
- and only specified sound cards (comma separated list)
- use -soundhw ? to get the list of supported cards
- use -soundhw all to enable all of them
--balloon none disable balloon device
--balloon virtio[,addr=str]
- enable virtio balloon device (default)
--usb enable the USB driver (will be the default soon)
--usbdevice name add the host or guest USB device 'name'
--device driver[,prop[=value][,...]]
- add device (based on driver)
- prop=value,... sets driver properties
- use -device ? to print all possible drivers
- use -device driver,? to print all possible properties
-
-File system options:
--fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]
- [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
-
-Virtual File system pass-through options:
--virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]
- [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
--virtfs_synth Create synthetic file system image
-
--name string1[,process=string2]
- set the name of the guest
- string1 sets the window title and string2 the process name (on Linux)
--uuid %08x-%04x-%04x-%04x-%012x
- specify machine UUID
-
-Display options:
--display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]
- [,window_close=on|off]|curses|none|
- vnc=<display>[,<optargs>]
- select display type
--nographic disable graphical output and redirect serial I/Os to console
--curses use a curses/ncurses interface instead of SDL
--no-frame open SDL window without a frame and window decorations
--alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
--ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
--no-quit disable SDL window close capability
--sdl enable SDL
--spice <args> enable spice
--portrait rotate graphical output 90 deg left (only PXA LCD)
--rotate <deg> rotate graphical output some deg left (only PXA LCD)
--vga [std|cirrus|vmware|qxl|xenfb|none]
- select video card type
--full-screen start in full screen
--vnc display start a VNC server on display
-
-i386 target only:
--win2k-hack use it when installing Windows 2000 to avoid a disk full bug
--no-fd-bootchk disable boot signature checking for floppy disks
--no-acpi disable ACPI
--no-hpet disable HPET
--acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]
- ACPI table description
--smbios file=binary
- load SMBIOS entry from binary file
--smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
- specify SMBIOS type 0 fields
--smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
- [,uuid=uuid][,sku=str][,family=str]
- specify SMBIOS type 1 fields
-
-Network options:
--net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
- create a new Network Interface Card and connect it to VLAN 'n'
--net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]
- [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
- [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
- connect the user mode network stack to VLAN 'n', configure its
- DHCP server and enabled optional services
--net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]
- connect the host TAP network interface to VLAN 'n'
- use network scripts 'file' (default=/etc/qemu-ifup)
- to configure it and 'dfile' (default=/etc/qemu-ifdown)
- to deconfigure it
- use '[down]script=no' to disable script execution
- use network helper 'helper' (default=/usr/local/libexec/qemu-bridge-helper) to
- configure it
- use 'fd=h' to connect to an already opened TAP interface
- use 'sndbuf=nbytes' to limit the size of the send buffer (the
- default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')
- use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag
- use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition
- use vhost=on to enable experimental in kernel accelerator
- (only has effect for virtio guests which use MSIX)
- use vhostforce=on to force vhost on for non-MSIX virtio guests
- use 'vhostfd=h' to connect to an already opened vhost net device
--net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]
- connects a host TAP network interface to a host bridge device 'br'
- (default=br0) using the program 'helper'
- (default=/usr/local/libexec/qemu-bridge-helper)
--net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
- connect the vlan 'n' to another VLAN using a socket connection
--net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]]
- connect the vlan 'n' to multicast maddr and port
- use 'localaddr=addr' to specify the host address to send packets from
--net socket[,vlan=n][,name=str][,fd=h][,udp=host:port][,localaddr=host:port]
- connect the vlan 'n' to another VLAN using an UDP tunnel
--net dump[,vlan=n][,file=f][,len=n]
- dump traffic on vlan 'n' to file 'f' (max n bytes per packet)
--net none use it alone to have zero network devices. If no -net option
- is provided, the default is '-net nic -net user'
--netdev [user|tap|bridge|socket],id=str[,option][,option][,...]
-
-Character device options:
--chardev null,id=id[,mux=on|off]
--chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
- [,server][,nowait][,telnet][,mux=on|off] (tcp)
--chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)
--chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
- [,localport=localport][,ipv4][,ipv6][,mux=on|off]
--chardev msmouse,id=id[,mux=on|off]
--chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
- [,mux=on|off]
--chardev file,id=id,path=path[,mux=on|off]
--chardev pipe,id=id,path=path[,mux=on|off]
--chardev pty,id=id[,mux=on|off]
--chardev stdio,id=id[,mux=on|off][,signal=on|off]
--chardev braille,id=id[,mux=on|off]
--chardev tty,id=id,path=path[,mux=on|off]
--chardev parport,id=id,path=path[,mux=on|off]
--chardev spicevmc,id=id,name=name[,debug=debug]
-
--iscsi [user=user][,password=password]
- [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE
- [,initiator-name=iqn]
- iSCSI session parameters
-Bluetooth(R) options:
--bt hci,null dumb bluetooth HCI - doesn't respond to commands
--bt hci,host[:id]
- use host's HCI with the given name
--bt hci[,vlan=n]
- emulate a standard HCI in virtual scatternet 'n'
--bt vhci[,vlan=n]
- add host computer to virtual scatternet 'n' using VHCI
--bt device:dev[,vlan=n]
- emulate a bluetooth device 'dev' in scatternet 'n'
-
-Linux/Multiboot boot specific:
--kernel bzImage use 'bzImage' as kernel image
--append cmdline use 'cmdline' as kernel command line
--initrd file use 'file' as initial ram disk
--dtb file use 'file' as device tree image
-
-Debug/Expert options:
--serial dev redirect the serial port to char device 'dev'
--parallel dev redirect the parallel port to char device 'dev'
--monitor dev redirect the monitor to char device 'dev'
--qmp dev like -monitor but opens in 'control' mode
--mon chardev=[name][,mode=readline|control][,default]
--debugcon dev redirect the debug console to char device 'dev'
--pidfile file write PID to 'file'
--singlestep always run in singlestep mode
--S freeze CPU at startup (use 'c' to start execution)
--gdb dev wait for gdb connection on 'dev'
--s shorthand for -gdb tcp::1234
--d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
--D logfile output log to logfile (instead of the default /tmp/qemu.log)
--hdachs c,h,s[,t]
- force hard disk 0 physical geometry and the optional BIOS
- translation (t=none or lba) (usually QEMU can guess them)
--L path set the directory for the BIOS, VGA BIOS and keymaps
--bios file set the filename for the BIOS
--enable-kvm enable KVM full virtualization support
--xen-domid id specify xen guest domain id
--xen-create create domain using xen hypercalls, bypassing xend
- warning: should not be used when xend is in use
--xen-attach attach to existing xen domain
- xend will use this when starting QEMU
--no-reboot exit instead of rebooting
--no-shutdown stop before shutdown
--loadvm [tag|id]
- start right away with a saved state (loadvm in monitor)
--daemonize daemonize QEMU after initializing
--option-rom rom load a file, rom, into the option ROM space
--clock force the use of the given methods for timer alarm.
- To see what timers are available use -clock ?
--rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]
- set the RTC base and clock, enable drift fix for clock ticks (x86 only)
--icount [N|auto]
- enable virtual instruction counter with 2^N clock ticks per
- instruction
--watchdog i6300esb|ib700
- enable virtual hardware watchdog [default=none]
--watchdog-action reset|shutdown|poweroff|pause|debug|none
- action when watchdog fires [default=reset]
--echr chr set terminal escape character instead of ctrl-a
--virtioconsole c
- set virtio console
--show-cursor show cursor
--tb-size n set TB size
--incoming p prepare for incoming migration, listen on port p
--nodefaults don't create default devices
--chroot dir chroot to dir just before starting the VM
--runas user change to user id user just before starting the VM
--sandbox <arg> Enable seccomp mode 2 system call filter (default 'off').
--readconfig <file>
--writeconfig <file>
- read/write config file
--nodefconfig
- do not load default config files at startup
--no-user-config
- do not load user-provided config files at startup
--trace [events=<file>][,file=<file>]
- specify tracing options
--qtest CHR specify tracing options
--qtest-log LOG specify tracing options
--enable-fips enable FIPS 140-2 compliance
--no-kvm disable KVM hardware virtualization
--no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC
--no-kvm-pit disable KVM kernel mode PIT
--no-kvm-pit-reinjection
- disable KVM kernel mode PIT interrupt reinjection
-
-During emulation, the following keys are useful:
-ctrl-alt-f toggle full screen
-ctrl-alt-n switch to virtual console 'n'
-ctrl-alt toggle mouse and keyboard grab
-
-When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c
deleted file mode 100644
index 1336eeef5e..0000000000
--- a/tests/qemuhelptest.c
+++ /dev/null
@@ -1,437 +0,0 @@
-#include <config.h>
-
-#include "testutils.h"
-
-#ifdef WITH_QEMU
-
-# include <stdio.h>
-# include <stdlib.h>
-
-# include "qemu/qemu_capabilities.h"
-# define __QEMU_CAPSPRIV_H_ALLOW__
-# include "qemu/qemu_capspriv.h"
-# undef __QEMU_CAPSPRIV_H_ALLOW__
-
-# include "viralloc.h"
-# include "virstring.h"
-
-# define VIR_FROM_THIS VIR_FROM_NONE
-
-struct testInfo {
- const char *name;
- virQEMUCapsPtr flags;
- unsigned int version;
- bool is_kvm;
- unsigned int kvm_version;
- int error;
-};
-
-static void printMismatchedFlags(virQEMUCapsPtr got,
- virQEMUCapsPtr expect)
-{
- size_t i;
-
- for (i = 0; i < QEMU_CAPS_LAST; i++) {
- bool gotFlag = virQEMUCapsGet(got, i);
- bool expectFlag = virQEMUCapsGet(expect, i);
- if (gotFlag && !expectFlag)
- fprintf(stderr, "Extra flag %zu\n", i);
- if (!gotFlag && expectFlag)
- fprintf(stderr, "Missing flag %zu\n", i);
- }
-}
-
-static int testHelpStrParsing(const void *data)
-{
- const struct testInfo *info = data;
- char *help = NULL;
- unsigned int version, kvm_version;
- bool is_kvm;
- virQEMUCapsPtr flags = NULL;
- int ret = -1;
- char *got = NULL;
- char *expected = NULL;
-
- if (!(help = virTestLoadFilePath("qemuhelpdata/", info->name, NULL)))
- goto cleanup;
-
- if (!(flags = virQEMUCapsNew()))
- goto cleanup;
-
- if (virQEMUCapsParseHelpStr("QEMU", help, flags,
- &version, &is_kvm, &kvm_version, false, NULL) == -1) {
- virErrorPtr err = virGetLastError();
-
- if (info->error && err && err->code == info->error)
- ret = 0;
- goto cleanup;
- }
-
-# ifndef WITH_YAJL
- if (virQEMUCapsGet(info->flags, QEMU_CAPS_MONITOR_JSON))
- virQEMUCapsSet(flags, QEMU_CAPS_MONITOR_JSON);
-# endif
-
- VIR_FREE(help);
- if (!(help = virTestLoadFilePath("qemuhelpdata/", info->name, "-device", NULL)))
- goto cleanup;
-
- if (virQEMUCapsParseDeviceStr(flags, help) < 0)
- goto cleanup;
-
- got = virQEMUCapsFlagsString(flags);
- expected = virQEMUCapsFlagsString(info->flags);
- if (!got || !expected)
- goto cleanup;
-
- if (STRNEQ(got, expected)) {
- VIR_TEST_DEBUG("%s: computed flags do not match: got %s, expected %s\n",
- info->name, got, expected);
-
- if (virTestGetDebug())
- printMismatchedFlags(flags, info->flags);
-
- goto cleanup;
- }
-
- if (version != info->version) {
- fprintf(stderr, "%s: parsed versions do not match: got %u, expected %u\n",
- info->name, version, info->version);
- goto cleanup;
- }
-
- if (is_kvm != info->is_kvm) {
- fprintf(stderr,
- "%s: parsed is_kvm flag does not match: got %u, expected %u\n",
- info->name, is_kvm, info->is_kvm);
- goto cleanup;
- }
-
- if (kvm_version != info->kvm_version) {
- fprintf(stderr,
- "%s: parsed KVM versions do not match: got %u, expected %u\n",
- info->name, kvm_version, info->kvm_version);
- goto cleanup;
- }
-
- ret = 0;
- cleanup:
- VIR_FREE(help);
- virObjectUnref(flags);
- VIR_FREE(got);
- VIR_FREE(expected);
- return ret;
-}
-
-static int
-mymain(void)
-{
- int ret = 0;
-
-# define DO_TEST_FULL(name, version, is_kvm, kvm_version, error, ...) \
- do { \
- struct testInfo info = { \
- name, NULL, version, is_kvm, kvm_version, error \
- }; \
- if (!(info.flags = virQEMUCapsNew())) \
- return EXIT_FAILURE; \
- virQEMUCapsSetList(info.flags, __VA_ARGS__, QEMU_CAPS_LAST); \
- if (virTestRun("QEMU Help String Parsing " name, \
- testHelpStrParsing, &info) < 0) \
- ret = -1; \
- virObjectUnref(info.flags); \
- } while (0)
-
-# define DO_TEST(name, version, is_kvm, kvm_version, ...) \
- DO_TEST_FULL(name, version, is_kvm, kvm_version, VIR_ERR_OK, __VA_ARGS__)
-
- DO_TEST("qemu-0.12.1", 12001, 0, 0,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_ENABLE_KVM,
- QEMU_CAPS_SDL,
- QEMU_CAPS_RTC,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_BOOT_MENU,
- QEMU_CAPS_NAME_PROCESS,
- QEMU_CAPS_SMBIOS_TYPE,
- QEMU_CAPS_VGA_NONE,
- QEMU_CAPS_DRIVE_AIO,
- QEMU_CAPS_PIIX3_USB_UHCI,
- QEMU_CAPS_PIIX4_USB_UHCI,
- QEMU_CAPS_USB_HUB,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_SCSI_LSI,
- QEMU_CAPS_VNC,
- QEMU_CAPS_DEVICE_VGA,
- QEMU_CAPS_DEVICE_CIRRUS_VGA,
- QEMU_CAPS_DEVICE_VMWARE_SVGA,
- QEMU_CAPS_DEVICE_USB_SERIAL,
- QEMU_CAPS_DEVICE_USB_NET,
- QEMU_CAPS_DEVICE_PCI_BRIDGE,
- QEMU_CAPS_DEVICE_SCSI_GENERIC,
- QEMU_CAPS_DEVICE_USB_STORAGE,
- QEMU_CAPS_DEVICE_USB_KBD,
- QEMU_CAPS_DEVICE_RTL8139,
- QEMU_CAPS_DEVICE_E1000,
- QEMU_CAPS_DEVICE_ISA_SERIAL,
- QEMU_CAPS_DEVICE_VIRTIO_NET);
- DO_TEST("qemu-kvm-0.12.3", 12003, 1, 0,
- QEMU_CAPS_DRIVE_BOOT,
- QEMU_CAPS_KVM,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_MEM_PATH,
- QEMU_CAPS_SDL,
- QEMU_CAPS_ENABLE_KVM,
- QEMU_CAPS_RTC,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_NO_KVM_PIT,
- QEMU_CAPS_TDF,
- QEMU_CAPS_BOOT_MENU,
- QEMU_CAPS_NESTING,
- QEMU_CAPS_NAME_PROCESS,
- QEMU_CAPS_SMBIOS_TYPE,
- QEMU_CAPS_VGA_NONE,
- QEMU_CAPS_DRIVE_AIO,
- QEMU_CAPS_PIIX3_USB_UHCI,
- QEMU_CAPS_PIIX4_USB_UHCI,
- QEMU_CAPS_USB_HUB,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_SCSI_LSI,
- QEMU_CAPS_VNC,
- QEMU_CAPS_DEVICE_VGA,
- QEMU_CAPS_DEVICE_CIRRUS_VGA,
- QEMU_CAPS_DEVICE_VMWARE_SVGA,
- QEMU_CAPS_DEVICE_USB_SERIAL,
- QEMU_CAPS_DEVICE_USB_NET,
- QEMU_CAPS_DEVICE_PCI_BRIDGE,
- QEMU_CAPS_DEVICE_SCSI_GENERIC,
- QEMU_CAPS_DEVICE_USB_STORAGE,
- QEMU_CAPS_DEVICE_USB_KBD,
- QEMU_CAPS_DEVICE_RTL8139,
- QEMU_CAPS_DEVICE_E1000,
- QEMU_CAPS_DEVICE_ISA_SERIAL,
- QEMU_CAPS_DEVICE_VIRTIO_NET);
- DO_TEST("qemu-kvm-0.13.0", 13000, 1, 0,
- QEMU_CAPS_DRIVE_BOOT,
- QEMU_CAPS_DRIVE_CACHE_UNSAFE,
- QEMU_CAPS_KVM,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_MEM_PATH,
- QEMU_CAPS_SDL,
- QEMU_CAPS_ENABLE_KVM,
- QEMU_CAPS_MONITOR_JSON,
- QEMU_CAPS_NETDEV,
- QEMU_CAPS_RTC,
- QEMU_CAPS_VHOST_NET,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_NO_KVM_PIT,
- QEMU_CAPS_TDF,
- QEMU_CAPS_PCI_CONFIGFD,
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_BOOT_MENU,
- QEMU_CAPS_FSDEV,
- QEMU_CAPS_NESTING,
- QEMU_CAPS_NAME_PROCESS,
- QEMU_CAPS_SMBIOS_TYPE,
- QEMU_CAPS_VGA_NONE,
- QEMU_CAPS_DRIVE_AIO,
- QEMU_CAPS_PCI_MULTIFUNCTION,
- QEMU_CAPS_PIIX3_USB_UHCI,
- QEMU_CAPS_PIIX4_USB_UHCI,
- QEMU_CAPS_VT82C686B_USB_UHCI,
- QEMU_CAPS_PCI_OHCI,
- QEMU_CAPS_USB_HUB,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_SCSI_LSI,
- QEMU_CAPS_VNC,
- QEMU_CAPS_DEVICE_VGA,
- QEMU_CAPS_DEVICE_CIRRUS_VGA,
- QEMU_CAPS_DEVICE_VMWARE_SVGA,
- QEMU_CAPS_DEVICE_USB_SERIAL,
- QEMU_CAPS_DEVICE_USB_NET,
- QEMU_CAPS_DEVICE_PCI_BRIDGE,
- QEMU_CAPS_DEVICE_SCSI_GENERIC,
- QEMU_CAPS_DEVICE_USB_KBD,
- QEMU_CAPS_DEVICE_USB_STORAGE,
- QEMU_CAPS_HOST_PCI_MULTIDOMAIN,
- QEMU_CAPS_DEVICE_IVSHMEM,
- QEMU_CAPS_DEVICE_RTL8139,
- QEMU_CAPS_DEVICE_E1000,
- QEMU_CAPS_DEVICE_ISA_SERIAL,
- QEMU_CAPS_DEVICE_VIRTIO_NET);
- DO_TEST("qemu-1.0", 1000000, 0, 0,
- QEMU_CAPS_DRIVE_CACHE_UNSAFE,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_MEM_PATH,
- QEMU_CAPS_SDL,
- QEMU_CAPS_ENABLE_KVM,
- QEMU_CAPS_MONITOR_JSON,
- QEMU_CAPS_NETDEV,
- QEMU_CAPS_RTC,
- QEMU_CAPS_VHOST_NET,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_BOOT_MENU,
- QEMU_CAPS_FSDEV,
- QEMU_CAPS_NAME_PROCESS,
- QEMU_CAPS_SMBIOS_TYPE,
- QEMU_CAPS_SPICE,
- QEMU_CAPS_VGA_NONE,
- QEMU_CAPS_BOOTINDEX,
- QEMU_CAPS_HDA_DUPLEX,
- QEMU_CAPS_DRIVE_AIO,
- QEMU_CAPS_CCID_EMULATED,
- QEMU_CAPS_CCID_PASSTHRU,
- QEMU_CAPS_CHARDEV_SPICEVMC,
- QEMU_CAPS_VIRTIO_TX_ALG,
- QEMU_CAPS_PCI_MULTIFUNCTION,
- QEMU_CAPS_VIRTIO_IOEVENTFD,
- QEMU_CAPS_SGA,
- QEMU_CAPS_VIRTIO_BLK_EVENT_IDX,
- QEMU_CAPS_VIRTIO_NET_EVENT_IDX,
- QEMU_CAPS_DRIVE_CACHE_DIRECTSYNC,
- QEMU_CAPS_PIIX3_USB_UHCI,
- QEMU_CAPS_PIIX4_USB_UHCI,
- QEMU_CAPS_USB_EHCI,
- QEMU_CAPS_ICH9_USB_EHCI1,
- QEMU_CAPS_VT82C686B_USB_UHCI,
- QEMU_CAPS_PCI_OHCI,
- QEMU_CAPS_USB_HUB,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_ICH9_AHCI,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_FSDEV_READONLY,
- QEMU_CAPS_VIRTIO_BLK_SCSI,
- QEMU_CAPS_FSDEV_WRITEOUT,
- QEMU_CAPS_SCSI_BLOCK,
- QEMU_CAPS_SCSI_CD,
- QEMU_CAPS_IDE_CD,
- QEMU_CAPS_SCSI_LSI,
- QEMU_CAPS_BLOCKIO,
- QEMU_CAPS_VNC,
- QEMU_CAPS_MACHINE_OPT,
- QEMU_CAPS_DEVICE_QXL,
- QEMU_CAPS_DEVICE_VGA,
- QEMU_CAPS_DEVICE_CIRRUS_VGA,
- QEMU_CAPS_DEVICE_VMWARE_SVGA,
- QEMU_CAPS_DEVICE_USB_SERIAL,
- QEMU_CAPS_DEVICE_USB_NET,
- QEMU_CAPS_DEVICE_SCSI_GENERIC,
- QEMU_CAPS_DEVICE_SCSI_GENERIC_BOOTINDEX,
- QEMU_CAPS_DEVICE_USB_KBD,
- QEMU_CAPS_DEVICE_USB_STORAGE,
- QEMU_CAPS_SPLASH_TIMEOUT,
- QEMU_CAPS_DEVICE_IVSHMEM,
- QEMU_CAPS_DEVICE_IOH3420,
- QEMU_CAPS_DEVICE_X3130_UPSTREAM,
- QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
- QEMU_CAPS_DEVICE_RTL8139,
- QEMU_CAPS_DEVICE_E1000,
- QEMU_CAPS_DEVICE_VIRTIO_NET,
- QEMU_CAPS_DEVICE_ISA_SERIAL,
- QEMU_CAPS_DISPLAY);
- DO_TEST("qemu-1.1.0", 1001000, 0, 0,
- QEMU_CAPS_DRIVE_CACHE_UNSAFE,
- QEMU_CAPS_DRIVE_SERIAL,
- QEMU_CAPS_MEM_PATH,
- QEMU_CAPS_SDL,
- QEMU_CAPS_ENABLE_KVM,
- QEMU_CAPS_MONITOR_JSON,
- QEMU_CAPS_NETDEV,
- QEMU_CAPS_RTC,
- QEMU_CAPS_VHOST_NET,
- QEMU_CAPS_NO_HPET,
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_BOOT_MENU,
- QEMU_CAPS_FSDEV,
- QEMU_CAPS_NAME_PROCESS,
- QEMU_CAPS_SMBIOS_TYPE,
- QEMU_CAPS_SPICE,
- QEMU_CAPS_VGA_NONE,
- QEMU_CAPS_BOOTINDEX,
- QEMU_CAPS_HDA_DUPLEX,
- QEMU_CAPS_DRIVE_AIO,
- QEMU_CAPS_CCID_EMULATED,
- QEMU_CAPS_CCID_PASSTHRU,
- QEMU_CAPS_CHARDEV_SPICEVMC,
- QEMU_CAPS_VIRTIO_TX_ALG,
- QEMU_CAPS_PCI_MULTIFUNCTION,
- QEMU_CAPS_VIRTIO_IOEVENTFD,
- QEMU_CAPS_SGA,
- QEMU_CAPS_VIRTIO_BLK_EVENT_IDX,
- QEMU_CAPS_VIRTIO_NET_EVENT_IDX,
- QEMU_CAPS_DRIVE_CACHE_DIRECTSYNC,
- QEMU_CAPS_PIIX3_USB_UHCI,
- QEMU_CAPS_PIIX4_USB_UHCI,
- QEMU_CAPS_USB_EHCI,
- QEMU_CAPS_ICH9_USB_EHCI1,
- QEMU_CAPS_VT82C686B_USB_UHCI,
- QEMU_CAPS_PCI_OHCI,
- QEMU_CAPS_USB_HUB,
- QEMU_CAPS_NO_SHUTDOWN,
- QEMU_CAPS_ICH9_AHCI,
- QEMU_CAPS_NO_ACPI,
- QEMU_CAPS_FSDEV_READONLY,
- QEMU_CAPS_VIRTIO_BLK_SCSI,
- QEMU_CAPS_DRIVE_COPY_ON_READ,
- QEMU_CAPS_FSDEV_WRITEOUT,
- QEMU_CAPS_DRIVE_IOTUNE,
- QEMU_CAPS_SCSI_DISK_CHANNEL,
- QEMU_CAPS_SCSI_BLOCK,
- QEMU_CAPS_SCSI_CD,
- QEMU_CAPS_IDE_CD,
- QEMU_CAPS_NO_USER_CONFIG,
- QEMU_CAPS_HDA_MICRO,
- QEMU_CAPS_NEC_USB_XHCI,
- QEMU_CAPS_NETDEV_BRIDGE,
- QEMU_CAPS_SCSI_LSI,
- QEMU_CAPS_VIRTIO_SCSI,
- QEMU_CAPS_BLOCKIO,
- QEMU_CAPS_VNC,
- QEMU_CAPS_MACHINE_OPT,
- QEMU_CAPS_DEVICE_QXL,
- QEMU_CAPS_DEVICE_VGA,
- QEMU_CAPS_DEVICE_CIRRUS_VGA,
- QEMU_CAPS_DEVICE_VMWARE_SVGA,
- QEMU_CAPS_DEVICE_USB_SERIAL,
- QEMU_CAPS_DEVICE_USB_NET,
- QEMU_CAPS_DTB,
- QEMU_CAPS_IPV6_MIGRATION,
- QEMU_CAPS_DEVICE_PCI_BRIDGE,
- QEMU_CAPS_DEVICE_SCSI_GENERIC,
- QEMU_CAPS_DEVICE_SCSI_GENERIC_BOOTINDEX,
- QEMU_CAPS_VNC_SHARE_POLICY,
- QEMU_CAPS_DEVICE_USB_KBD,
- QEMU_CAPS_DEVICE_USB_STORAGE,
- QEMU_CAPS_OBJECT_USB_AUDIO,
- QEMU_CAPS_SPLASH_TIMEOUT,
- QEMU_CAPS_DEVICE_IVSHMEM,
- QEMU_CAPS_DEVICE_IOH3420,
- QEMU_CAPS_DEVICE_X3130_UPSTREAM,
- QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
- QEMU_CAPS_DEVICE_RTL8139,
- QEMU_CAPS_DEVICE_E1000,
- QEMU_CAPS_DEVICE_VIRTIO_NET,
- QEMU_CAPS_DEVICE_ISA_SERIAL,
- QEMU_CAPS_DISPLAY);
- DO_TEST_FULL("qemu-1.2.0", 1002000, 0, 0, VIR_ERR_CONFIG_UNSUPPORTED,
- QEMU_CAPS_LAST);
- DO_TEST_FULL("qemu-kvm-1.2.0", 1002000, 1, 0, VIR_ERR_CONFIG_UNSUPPORTED,
- QEMU_CAPS_LAST);
-
- return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE;
-}
-
-VIR_TEST_MAIN(mymain)
-
-#else
-
-int main(void)
-{
- return EXIT_AM_SKIP;
-}
-
-#endif /* WITH_QEMU */
--
2.16.1
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
