Original code was checking for non empty disk source before proceeding
to actually attach disk device to VM. This prevented from creating
empty removable devices like DVD or floppy. Therefore, this patch
re-organizes the loop work-flow to allow such configurations as well as
makes the code follow better libvirt practices. Additionally, adjusted
debug logs to be more helpful - removed old ones and added new which
give more valuable info for troubleshooting.
---
src/vbox/vbox_common.c | 206 +++++++++++++++++++++++++++++++------------------
1 file changed, 130 insertions(+), 76 deletions(-)
diff --git a/src/vbox/vbox_common.c b/src/vbox/vbox_common.c
index 9f4bf18a3..2bd891efb 100644
--- a/src/vbox/vbox_common.c
+++ b/src/vbox/vbox_common.c
@@ -959,11 +959,12 @@ static int
vboxAttachDrives(virDomainDefPtr def, vboxDriverPtr data, IMachine *machine)
{
size_t i;
- int type, format, ret = 0;
+ int type, ret = 0;
const char *src = NULL;
nsresult rc = 0;
virDomainDiskDefPtr disk = NULL;
PRUnichar *storageCtlName = NULL;
+ char *controllerName = NULL;
IMedium *medium = NULL;
PRUnichar *mediumFileUtf16 = NULL;
PRUint32 devicePort, deviceSlot, deviceType, accessMode;
@@ -1015,47 +1016,104 @@ vboxAttachDrives(virDomainDefPtr def, vboxDriverPtr data, IMachine *machine)
disk = def->disks[i];
src = virDomainDiskGetSource(disk);
type = virDomainDiskGetType(disk);
- format = virDomainDiskGetFormat(disk);
deviceType = DeviceType_Null;
accessMode = AccessMode_ReadOnly;
devicePort = disk->info.addr.drive.unit;
deviceSlot = disk->info.addr.drive.bus;
- VIR_DEBUG("disk(%zu) type: %d", i, type);
- VIR_DEBUG("disk(%zu) device: %d", i, disk->device);
- VIR_DEBUG("disk(%zu) bus: %d", i, disk->bus);
- VIR_DEBUG("disk(%zu) src: %s", i, src);
- VIR_DEBUG("disk(%zu) dst: %s", i, disk->dst);
- VIR_DEBUG("disk(%zu) driverName: %s", i,
- virDomainDiskGetDriver(disk));
- VIR_DEBUG("disk(%zu) driverType: %s", i,
- virStorageFileFormatTypeToString(format));
- VIR_DEBUG("disk(%zu) cachemode: %d", i, disk->cachemode);
- VIR_DEBUG("disk(%zu) readonly: %s", i, (disk->src->readonly
- ? "True" : "False"));
- VIR_DEBUG("disk(%zu) shared: %s", i, (disk->src->shared
- ? "True" : "False"));
-
- if (type == VIR_STORAGE_TYPE_FILE && src) {
- VBOX_UTF8_TO_UTF16(src, &mediumFileUtf16);
+ if (type != VIR_STORAGE_TYPE_FILE) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("Unsupported storage type %s, the only supported "
+ "type is %s"),
+ virStorageTypeToString(type),
+ virStorageTypeToString(VIR_STORAGE_TYPE_FILE));
+ ret = -1;
+ goto cleanup;
+ }
- if (disk->device == VIR_DOMAIN_DISK_DEVICE_DISK) {
- deviceType = DeviceType_HardDisk;
- accessMode = AccessMode_ReadWrite;
- } else if (disk->device == VIR_DOMAIN_DISK_DEVICE_CDROM) {
- deviceType = DeviceType_DVD;
- accessMode = AccessMode_ReadOnly;
- } else if (disk->device == VIR_DOMAIN_DISK_DEVICE_FLOPPY) {
- deviceType = DeviceType_Floppy;
- accessMode = AccessMode_ReadWrite;
- } else {
+ switch ((virDomainDiskDevice) disk->device) {
+ case VIR_DOMAIN_DISK_DEVICE_DISK:
+ if (!src) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("Missing disk source file path"));
ret = -1;
goto cleanup;
}
- gVBoxAPI.UIVirtualBox.FindHardDisk(data->vboxObj, mediumFileUtf16,
- deviceType, accessMode, &medium);
+ deviceType = DeviceType_HardDisk;
+ accessMode = AccessMode_ReadWrite;
+
+ break;
+
+ case VIR_DOMAIN_DISK_DEVICE_CDROM:
+ deviceType = DeviceType_DVD;
+ accessMode = AccessMode_ReadOnly;
+
+ break;
+ case VIR_DOMAIN_DISK_DEVICE_FLOPPY:
+ deviceType = DeviceType_Floppy;
+ accessMode = AccessMode_ReadWrite;
+
+ break;
+ case VIR_DOMAIN_DISK_DEVICE_LUN:
+ case VIR_DOMAIN_DISK_DEVICE_LAST:
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("The vbox driver does not support %s disk device"),
+ virDomainDiskDeviceTypeToString(disk->device));
+ ret = -1;
+ goto cleanup;
+ }
+
+ switch ((virDomainDiskBus) disk->bus) {
+ case VIR_DOMAIN_DISK_BUS_IDE:
+ VBOX_UTF8_TO_UTF16("IDE Controller", &storageCtlName);
+ devicePort = def->disks[i]->info.addr.drive.bus;
+ deviceSlot = def->disks[i]->info.addr.drive.unit;
+
+ break;
+ case VIR_DOMAIN_DISK_BUS_SATA:
+ VBOX_UTF8_TO_UTF16("SATA Controller", &storageCtlName);
+
+ break;
+ case VIR_DOMAIN_DISK_BUS_SCSI:
+ VBOX_UTF8_TO_UTF16("SCSI Controller", &storageCtlName);
+
+ break;
+ case VIR_DOMAIN_DISK_BUS_FDC:
+ VBOX_UTF8_TO_UTF16("Floppy Controller", &storageCtlName);
+ devicePort = 0;
+ deviceSlot = disk->info.addr.drive.unit;
+
+ break;
+ case VIR_DOMAIN_DISK_BUS_VIRTIO:
+ case VIR_DOMAIN_DISK_BUS_XEN:
+ case VIR_DOMAIN_DISK_BUS_USB:
+ case VIR_DOMAIN_DISK_BUS_UML:
+ case VIR_DOMAIN_DISK_BUS_SD:
+ case VIR_DOMAIN_DISK_BUS_LAST:
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("The vbox driver does not support %s bus type"),
+ virDomainDiskBusTypeToString(disk->bus));
+ ret = -1;
+ goto cleanup;
+ }
+ /* If disk source is specified, lookup IMedium - removable drives don't
+ * have either.
+ */
+ if (src) {
+ VBOX_UTF8_TO_UTF16(src, &mediumFileUtf16);
+ VIR_DEBUG("Looking up medium %s, type: %d, mode: %d", src,
+ deviceType, accessMode);
+
+ rc = gVBoxAPI.UIVirtualBox.FindHardDisk(data->vboxObj, mediumFileUtf16,
+ deviceType, accessMode, &medium);
+
+ /* The following is not needed for vbox 4.2+ but older versions have
+ * distinct find and open operations where the former looks in vbox
+ * media registry while the latter at storage location. In 4.2+, the
+ * OpenMedium call takes care of both cases internally
+ */
if (!medium) {
rc = gVBoxAPI.UIVirtualBox.OpenMedium(data->vboxObj,
mediumFileUtf16,
@@ -1065,7 +1123,7 @@ vboxAttachDrives(virDomainDefPtr def, vboxDriverPtr data, IMachine *machine)
if (!medium) {
virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Failed to attach the following disk/dvd/floppy "
+ _("Failed to open the following disk/dvd/floppy "
"to the machine: %s, rc=%08x"), src, rc);
ret = -1;
goto cleanup;
@@ -1080,57 +1138,53 @@ vboxAttachDrives(virDomainDefPtr def, vboxDriverPtr data, IMachine *machine)
ret = -1;
goto cleanup;
}
+ }
- if (disk->device == VIR_DOMAIN_DISK_DEVICE_DISK) {
- if (disk->src->readonly) {
- gVBoxAPI.UIMedium.SetType(medium, MediumType_Immutable);
- VIR_DEBUG("Setting harddisk to immutable");
- } else if (!disk->src->readonly) {
- gVBoxAPI.UIMedium.SetType(medium, MediumType_Normal);
- VIR_DEBUG("Setting harddisk type to normal");
- }
+ if (disk->device == VIR_DOMAIN_DISK_DEVICE_DISK) {
+ if (disk->src->readonly) {
+ gVBoxAPI.UIMedium.SetType(medium, MediumType_Immutable);
+ VIR_DEBUG("Setting hard disk to immutable");
+ } else if (!disk->src->readonly) {
+ gVBoxAPI.UIMedium.SetType(medium, MediumType_Normal);
+ VIR_DEBUG("Setting hard disk type to normal");
}
- if (disk->bus == VIR_DOMAIN_DISK_BUS_IDE) {
- VBOX_UTF8_TO_UTF16("IDE Controller", &storageCtlName);
- devicePort = def->disks[i]->info.addr.drive.bus;
- deviceSlot = def->disks[i]->info.addr.drive.unit;
- } else if (disk->bus == VIR_DOMAIN_DISK_BUS_SATA) {
- VBOX_UTF8_TO_UTF16("SATA Controller", &storageCtlName);
- } else if (disk->bus == VIR_DOMAIN_DISK_BUS_SCSI) {
- VBOX_UTF8_TO_UTF16("SCSI Controller", &storageCtlName);
- } else if (disk->bus == VIR_DOMAIN_DISK_BUS_FDC) {
- VBOX_UTF8_TO_UTF16("Floppy Controller", &storageCtlName);
- devicePort = 0;
- deviceSlot = disk->info.addr.drive.unit;
- }
+ }
- /* attach the harddisk/dvd/Floppy to the storage controller */
- rc = gVBoxAPI.UIMachine.AttachDevice(machine,
- storageCtlName,
- devicePort,
- deviceSlot,
- deviceType,
- medium);
+ VBOX_UTF16_TO_UTF8(storageCtlName, &controllerName);
+ VIR_DEBUG("Attaching disk(%zu), controller: %s, port: %d, slot: %d, "
+ "type: %d, medium: %s", i, controllerName, devicePort,
+ deviceSlot, deviceType, medium == NULL ? "empty" : src);
+ VBOX_UTF8_FREE(controllerName);
- if (NS_FAILED(rc)) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Could not attach the file as "
- "harddisk/dvd/floppy: %s, rc=%08x"), src, rc);
- ret = -1;
- goto cleanup;
- } else {
- DEBUGIID("Attached HDD/DVD/Floppy with UUID", &mediumUUID);
- }
- cleanup:
- VBOX_MEDIUM_RELEASE(medium);
- vboxIIDUnalloc(&mediumUUID);
- VBOX_UTF16_FREE(mediumFileUtf16);
- VBOX_UTF16_FREE(storageCtlName);
+ /* Attach the harddisk/dvd/Floppy to the storage controller,
+ * medium == NULL is ok here
+ */
+ rc = gVBoxAPI.UIMachine.AttachDevice(machine,
+ storageCtlName,
+ devicePort,
+ deviceSlot,
+ deviceType,
+ medium);
- if (ret < 0)
- break;
+ if (NS_FAILED(rc)) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Could not attach the file as "
+ "harddisk/dvd/floppy: %s, rc=%08x"), src, rc);
+ ret = -1;
+ goto cleanup;
+ } else {
+ DEBUGIID("Attached HDD/DVD/Floppy with UUID", &mediumUUID);
}
+
+ cleanup:
+ VBOX_MEDIUM_RELEASE(medium);
+ vboxIIDUnalloc(&mediumUUID);
+ VBOX_UTF16_FREE(mediumFileUtf16);
+ VBOX_UTF16_FREE(storageCtlName);
+
+ if (ret < 0)
+ break;
}
return ret;
--
2.14.2
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list
