Allow libxl to handle channel element which creates a Xen
console visible to the guest as a low-bandwitdh communication
channel. If type is PTY we also fetch the tty after boot using
libxl_channel_getinfo to fetch the tty path. On socket case,
we autogenerate a path if not specified in the XML. Path autogenerated
is slightly different from qemu driver: qemu stores also on
"channels/target" but it creates then a directory per domain with
each channel target name. libxl doesn't appear to have a clear
definition of private files associated with each domain, so for
simplicity we do it slightly different. On qemu each autogenerated
channel goes like:
channels/target/<domain-name>/<target name>
Whereas for libxl:
channels/target/<domain-name>-<target name>
Should note that if path is not specified it won't persist,
existing only on live XML, unless user had initially specified it.
Since support for libxl channels only came on Xen >= 4.5 we therefore
need to conditionally compile it with LIBXL_HAVE_DEVICE_CHANNEL.
After this patch and having a qemu guest agent:
$ cat domain.xml | grep -a1 channel | head -n 5 | tail -n 4
<channel type='unix'>
<source mode='bind' path='/tmp/channel'/>
<target type='xen' name='org.qemu.guest_agent.0'/>
</channel>
$ virsh create domain.xml
$ echo '{"execute":"guest-network-get-interfaces"}' | socat
stdio,ignoreeof unix-connect:/tmp/channel
{"execute":"guest-network-get-interfaces"}
{"return": [{"name": "lo", "ip-addresses": [{"ip-address-type": "ipv4",
"ip-address": "127.0.0.1", "prefix": 8}, {"ip-address-type": "ipv6",
"ip-address": "::1", "prefix": 128}], "hardware-address":
"00:00:00:00:00:00"}, {"name": "eth0", "ip-addresses":
[{"ip-address-type": "ipv4", "ip-address": "10.100.0.6", "prefix": 24},
{"ip-address-type": "ipv6", "ip-address": "fe80::216:3eff:fe40:88eb",
"prefix": 64}], "hardware-address": "00:16:3e:40:88:eb"}, {"name":
"sit0"}]}
Signed-off-by: Joao Martins <joao.m.martins@xxxxxxxxxx>
---
Since v1:
* Autogenerated paths, and updated commit message explaning it the different
naming. Despite per domain name being slightly different, parent
directory is same across both drivers.
* Remove the switch case from target type xen and rework the function structure
a bit.
---
src/libxl/libxl_conf.c | 120 ++++++++++++++++++++++++++++++++++++++++++++++-
src/libxl/libxl_conf.h | 4 +-
src/libxl/libxl_domain.c | 44 ++++++++++++++++-
src/libxl/libxl_driver.c | 7 +++
4 files changed, 171 insertions(+), 4 deletions(-)
diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c
index 306e441..824f2d2 100644
--- a/src/libxl/libxl_conf.c
+++ b/src/libxl/libxl_conf.c
@@ -88,6 +88,7 @@ libxlDriverConfigDispose(void *obj)
VIR_FREE(cfg->saveDir);
VIR_FREE(cfg->autoDumpDir);
VIR_FREE(cfg->lockManagerName);
+ VIR_FREE(cfg->channelDir);
virFirmwareFreeList(cfg->firmwares, cfg->nfirmwares);
}
@@ -1339,6 +1340,8 @@ libxlDriverConfigNew(void)
goto error;
if (VIR_STRDUP(cfg->autoDumpDir, LIBXL_DUMP_DIR) < 0)
goto error;
+ if (VIR_STRDUP(cfg->channelDir, LIBXL_CHANNEL_DIR) < 0)
+ goto error;
if (virAsprintf(&log_file, "%s/libxl-driver.log", cfg->logDir) < 0)
goto error;
@@ -1490,6 +1493,114 @@ int libxlDriverConfigLoadFile(libxlDriverConfigPtr cfg,
}
+#ifdef LIBXL_HAVE_DEVICE_CHANNEL
+static int
+libxlPrepareChannel(virDomainChrDefPtr channel,
+ const char *channelDir,
+ const char *domainName)
+{
+ if (channel->targetType == VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_XEN &&
+ channel->source.type == VIR_DOMAIN_CHR_TYPE_UNIX &&
+ !channel->source.data.nix.path) {
+ if (virAsprintf(&channel->source.data.nix.path,
+ "%s/%s-%s", channelDir, domainName,
+ channel->target.name ? channel->target.name
+ : "unknown.sock") < 0)
+ return -1;
+
+ channel->source.data.nix.listen = true;
+ }
+
+ return 0;
+}
+
+static int
+libxlMakeChannel(virDomainChrDefPtr l_channel,
+ libxl_device_channel *x_channel)
+{
+ int ret = -1;
+
+ libxl_device_channel_init(x_channel);
+
+ if (l_channel->targetType != VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_XEN) {
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("channel target type not supported"));
+ return ret;
+ }
+
+ switch (l_channel->source.type) {
+ case VIR_DOMAIN_CHR_TYPE_PTY:
+ x_channel->connection = LIBXL_CHANNEL_CONNECTION_PTY;
+ break;
+ case VIR_DOMAIN_CHR_TYPE_UNIX:
+ x_channel->connection = LIBXL_CHANNEL_CONNECTION_SOCKET;
+ if (VIR_STRDUP(x_channel->u.socket.path,
+ l_channel->source.data.nix.path) < 0)
+ return ret;
+ break;
+ default:
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+ _("channel source type not supported"));
+ break;
+ }
+
+ if (!l_channel->target.name) {
+ virReportError(VIR_ERR_OPERATION_INVALID, "%s",
+ _("channel target name missing"));
+ return ret;
+ }
+
+ if (VIR_STRDUP(x_channel->name, l_channel->target.name) < 0)
+ return ret;
+
+ return 0;
+}
+
+static int
+libxlMakeChannelList(libxlDriverPrivatePtr driver,
+ virDomainDefPtr def,
+ libxl_domain_config *d_config)
+{
+ virDomainChrDefPtr *l_channels = def->channels;
+ size_t nchannels = def->nchannels;
+ libxl_device_channel *x_channels;
+ libxlDriverConfigPtr cfg;
+ size_t i, nvchannels = 0;
+
+ if (VIR_ALLOC_N(x_channels, nchannels) < 0)
+ return -1;
+
+ cfg = libxlDriverConfigGet(driver);
+
+ for (i = 0; i < nchannels; i++) {
+ if (l_channels[i]->deviceType != VIR_DOMAIN_CHR_DEVICE_TYPE_CHANNEL)
+ continue;
+
+ if (libxlPrepareChannel(l_channels[i], cfg->channelDir, def->name) < 0)
+ goto error;
+
+ if (libxlMakeChannel(l_channels[i], &x_channels[nvchannels]) < 0)
+ goto error;
+
+ nvchannels++;
+ }
+
+ VIR_SHRINK_N(x_channels, nchannels, nchannels - nvchannels);
+ d_config->channels = x_channels;
+ d_config->num_channels = nvchannels;
+ virObjectUnref(cfg);
+
+ return 0;
+
+ error:
+ for (i = 0; i < nchannels; i++)
+ libxl_device_channel_dispose(&x_channels[i]);
+ VIR_FREE(x_channels);
+ virObjectUnref(cfg);
+ return -1;
+}
+#endif
+
#ifdef LIBXL_HAVE_PVUSB
int
libxlMakeUSBController(virDomainControllerDefPtr controller,
@@ -1828,11 +1939,13 @@ libxlDriverNodeGetInfo(libxlDriverPrivatePtr driver, virNodeInfoPtr info)
}
int
-libxlBuildDomainConfig(virPortAllocatorPtr graphicsports,
+libxlBuildDomainConfig(libxlDriverPrivatePtr driver,
virDomainDefPtr def,
libxl_ctx *ctx,
libxl_domain_config *d_config)
{
+ virPortAllocatorPtr graphicsports = driver->reservedGraphicsPorts;
+
libxl_domain_config_init(d_config);
if (libxlMakeDomCreateInfo(ctx, def, &d_config->c_info) < 0)
@@ -1864,6 +1977,11 @@ libxlBuildDomainConfig(virPortAllocatorPtr graphicsports,
return -1;
#endif
+#ifdef LIBXL_HAVE_DEVICE_CHANNEL
+ if (libxlMakeChannelList(driver, def, d_config) < 0)
+ return -1;
+#endif
+
/*
* Now that any potential VFBs are defined, update the build info with
* the data of the primary display. Some day libxl might implicitely do
diff --git a/src/libxl/libxl_conf.h b/src/libxl/libxl_conf.h
index ed5a3de..56a3d4a 100644
--- a/src/libxl/libxl_conf.h
+++ b/src/libxl/libxl_conf.h
@@ -57,6 +57,7 @@
# define LIBXL_LIB_DIR LOCALSTATEDIR "/lib/libvirt/libxl"
# define LIBXL_SAVE_DIR LIBXL_LIB_DIR "/save"
# define LIBXL_DUMP_DIR LIBXL_LIB_DIR "/dump"
+# define LIBXL_CHANNEL_DIR LIBXL_LIB_DIR "/channel/target"
# define LIBXL_BOOTLOADER_PATH "pygrub"
@@ -98,6 +99,7 @@ struct _libxlDriverConfig {
char *libDir;
char *saveDir;
char *autoDumpDir;
+ char *channelDir;
virFirmwarePtr *firmwares;
size_t nfirmwares;
@@ -197,7 +199,7 @@ virDomainXMLOptionPtr
libxlCreateXMLConf(void);
int
-libxlBuildDomainConfig(virPortAllocatorPtr graphicsports,
+libxlBuildDomainConfig(libxlDriverPrivatePtr driver,
virDomainDefPtr def,
libxl_ctx *ctx,
libxl_domain_config *d_config);
diff --git a/src/libxl/libxl_domain.c b/src/libxl/libxl_domain.c
index 43f4a7f..0540afb 100644
--- a/src/libxl/libxl_domain.c
+++ b/src/libxl/libxl_domain.c
@@ -1059,6 +1059,42 @@ libxlDomainCreateIfaceNames(virDomainDefPtr def, libxl_domain_config *d_config)
}
}
+#ifdef LIBXL_HAVE_DEVICE_CHANNEL
+static void
+libxlDomainCreateChannelPTY(virDomainDefPtr def, libxl_ctx *ctx)
+{
+ libxl_device_channel *x_channels;
+ virDomainChrDefPtr chr;
+ size_t i;
+ int nchannels;
+
+ x_channels = libxl_device_channel_list(ctx, def->id, &nchannels);
+ if (!x_channels)
+ return;
+
+ for (i = 0; i < def->nchannels; i++) {
+ libxl_channelinfo channelinfo;
+ int ret;
+
+ chr = def->channels[i];
+ if (chr->source.type != VIR_DOMAIN_CHR_TYPE_PTY)
+ continue;
+
+ ret = libxl_device_channel_getinfo(ctx, def->id, &x_channels[i],
+ &channelinfo);
+
+ if (!ret && channelinfo.u.pty.path &&
+ channelinfo.u.pty.path != '\0') {
+ VIR_FREE(chr->source.data.file.path);
+ ignore_value(VIR_STRDUP(chr->source.data.file.path,
+ channelinfo.u.pty.path));
+ }
+ }
+
+ for (i = 0; i < nchannels; i++)
+ libxl_device_channel_dispose(&x_channels[i]);
+}
+#endif
#ifdef LIBXL_HAVE_SRM_V2
# define LIBXL_DOMSTART_RESTORE_VER_ATTR /* empty */
@@ -1181,8 +1217,7 @@ libxlDomainStart(libxlDriverPrivatePtr driver,
if (libxlNetworkPrepareDevices(vm->def) < 0)
goto cleanup_dom;
- if (libxlBuildDomainConfig(driver->reservedGraphicsPorts, vm->def,
- cfg->ctx, &d_config) < 0)
+ if (libxlBuildDomainConfig(driver, vm->def, cfg->ctx, &d_config) < 0)
goto cleanup_dom;
if (cfg->autoballoon && libxlDomainFreeMem(cfg->ctx, &d_config) < 0)
@@ -1263,6 +1298,11 @@ libxlDomainStart(libxlDriverPrivatePtr driver,
libxlDomainCreateIfaceNames(vm->def, &d_config);
+#ifdef LIBXL_HAVE_DEVICE_CHANNEL
+ if (vm->def->nchannels > 0)
+ libxlDomainCreateChannelPTY(vm->def, cfg->ctx);
+#endif
+
if ((dom_xml = virDomainDefFormat(vm->def, cfg->caps, 0)) == NULL)
goto destroy_dom;
diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c
index 42fa129..d555202 100644
--- a/src/libxl/libxl_driver.c
+++ b/src/libxl/libxl_driver.c
@@ -718,6 +718,13 @@ libxlStateInitialize(bool privileged,
virStrerror(errno, ebuf, sizeof(ebuf)));
goto error;
}
+ if (virFileMakePath(cfg->channelDir) < 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("failed to create channel dir '%s': %s"),
+ cfg->channelDir,
+ virStrerror(errno, ebuf, sizeof(ebuf)));
+ goto error;
+ }
if (!(libxl_driver->lockManager =
virLockManagerPluginNew(cfg->lockManagerName ?
--
2.1.4
--
libvir-list mailing list
libvir-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/libvir-list