Howdy, you might need to clear the disk before you configure it. Try adding this line: clearpart --initlabel --all --drives=sda Rob Fisher Verizon -----Original Message----- From: kickstart-list-bounces@xxxxxxxxxx [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of Netravali, Ganesh Sent: Tuesday, July 21, 2015 6:35 AM To: kickstart-list@xxxxxxxxxx Subject: Install RHEL6 from tmpfs Hi I have a situation where I can access the system remotely from BMC and access the console and need to do the automated kickstart installation. Presently system is installed with RHEL6 and followed the below step for hard disk based installation. 1. Copied automated ks.cfg to vmlinuz, initrd.img and images dir to / folder from ISO. Modified the grub.conf with below lines. title RedHat Install root (hd0,2) kernel /boot/vmlinuz ro root=UUID=9684465d-8ded-43cc-8069-de5ff713dd40 ks=hd:sda2:/ks-sa.cfg repo=/mnt/isodir stage2=hd:sda2:/images/install.img initrd /boot/initrd.img 2. created the tar out of cdrom contents and kept in / dir 3. Below are is the content of kickstart file to copy the repo to tmpfs created out of system RAM. harddrive --partition=tmpfs --dir=/mnt/isodir Preinstall section code to create the install repository mount -t tmpfs -o size=1g tmpfs /mnt/isodir mkdir /mnt/isomount mount /dev/sda2 /mnt/isomount cd /mnt/isodir tar -xzvf /mnt/isomount/repo.tgz umount /dev/sda2 reboot the system and boot from "Redhat Install" and this triggers the installation. Presently I got struck in partitioning the sda. Any one tried this before? Is there any suggestions or good pointers? Thanks Ganesh _______________________________________________ Kickstart-list mailing list Kickstart-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/kickstart-list _______________________________________________ Kickstart-list mailing list Kickstart-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/kickstart-list