Nope. Nothing in the error logs. In my troubleshooting, this is what I've found... When I remove the ks=http://<ServerIP>/<PATH>/ks.cfg from my "default" file Client PXE boots, shows menu and loads vmlinuz/initrd. Then it shows up the Language selection. No luck. However, when I change my default file to read: ks=/<PATH>/ks.cfg, Client PXE boots, shows menu and loads vmlinuz/initrd. Then it gives the error "Error opening kickstart file (null): Bad address" I do some more research (see link below) http://linux.derkeiler.com/Mailing-Lists/Fedora/2004-06/5939.html and modified the ks.cfg file...add more network parameters like so: network --device=eth0 --bootproto=static --ip=171.67.39.139 --netmask=255.255.255.224 --gateway=171.67.39.129 --nameserver=171.64.7.77 --hostname=as-test.stanford.edu Still no luck. I then changed my --device=eth0 to --device=link and then to --device=eth1...still no luck. Then put it back to --device=eth0. Then I change my PATH from: url --url http://171.67.39.130/ENT_LINUX_64/Enterprise to url --url http://171.67.39.130/ENT_LINUX_64 Still no luck. Again nothing in the http logs. It looks like the installer is reading the ks.cfg file silently since it complained that it couldn't find it from the default file when I didn't specify the http://<servername>. Can I figure out what is reading and stopping. Is there a way to look at the kickstart logs (If there is any...I haven't seen one). I tried to create logging as well in my ks.cfg file...no luck...no output: %pre --log=/tmp/my-pre-log echo 'Hello, World!' Here is my directory/file setup: TFTP: /tftpboot/linux-install/pxelinux.cfg [root@as-kickball pxelinux.cfg]# ls default pxeos.xml [root@as-kickball linux-install]# ls -lR .: total 32 drwxr-xr-x 2 root root 4096 May 14 00:31 ENT_LINUX_32 drwxr-xr-x 2 root root 4096 May 16 00:30 ENT_LINUX_64 drwxr-xr-x 2 root root 4096 May 14 21:09 msgs -rwxr-xr-x 1 root root 12952 Oct 24 2006 pxelinux.0 drwxr-xr-x 2 root root 4096 May 16 00:25 pxelinux.cfg ./ENT_LINUX_32: total 0 ./ENT_LINUX_64: total 5984 -rwxr-xr-x 1 root root 4310479 May 14 15:29 initrd.img -rwxr-xr-x 1 root root 85 May 16 00:30 ks.cfg -rwxr-xr-x 1 root root 1792835 May 14 15:29 vmlinuz ./msgs: total 24 -rwxr-xr-x 1 root root 534 May 14 21:00 boot.msg -rwxr-xr-x 1 root root 668 Oct 24 2006 expert.msg -rwxr-xr-x 1 root root 871 Oct 24 2006 general.msg -rwxr-xr-x 1 root root 860 Oct 24 2006 param.msg -rwxr-xr-x 1 root root 530 Oct 24 2006 rescue.msg -rwxr-xr-x 1 root root 545 Oct 24 2006 snake.msg ./pxelinux.cfg: total 20 -rwxr-xr-x 1 root root 511 May 16 00:25 default -rwxr-xr-x 1 root root 511 May 15 23:34 default.bak -rwxr-xr-x 1 root root 461 May 15 14:44 default.dhcp -rwxr-xr-x 1 root root 573 May 15 13:30 default.staticIP -rwxr-xr-x 1 root root 42 May 14 16:28 pxeos.xml My HTTP directory: [root@as-kickball /]# ls -lart /var/www/html total 24 drwxr-xr-x 8 root root 4096 Mar 21 19:17 .. drwxr-xr-x 4 root root 4096 May 14 00:35 . drwxr-xr-x 3 root root 4096 May 14 00:40 ENT_LINUX_32 drwxr-xr-x 3 root root 4096 May 15 15:49 ENT_LINUX_64 [root@as-kickball /]# ls -lart /var/www/html/ENT_LINUX_64/Enterprise/ total 136 drwxr-xr-x 2 root root 114688 Feb 24 13:15 RPMS drwxr-xr-x 2 root root 4096 May 14 15:53 base -rwxr-xr-x 1 root root 1386 May 15 15:05 ks_ent_linux_64.cfg drwxr-xr-x 3 root root 4096 May 15 15:49 .. -rw-r--r-- 1 root root 1242 May 16 01:08 ks.cfg drwxr-xr-x 4 root root 4096 May 16 01:08 . I am at a loss now. I am sure it's something simple as it mostly is. Help is appreciated. Tomorrow, I'll tell my networking guy to enable "spanning tree" so I could use dhcp and get the static crap out of my way. Will let you know more. -Mukarram. -----Original Message----- From: kickstart-list-bounces@xxxxxxxxxx [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of Mike Jennings Sent: Tuesday, May 15, 2007 8:47 PM To: Discussion list about Kickstart Subject: Re: Unable to get any http requests:Unable to retreive netstg2.imgfile Is the apache log showing any 404 errors? My stupid screwups are always shown in the error log when I typo something. Mike On May 15, 2007, at 10:39 PM, Mukarram Syed wrote: > > Colin, > I changed it from ksdevice=eth0 to ksdevice=link > > Sorry, that didn't help. > > Wonder what else could it be, why is it not connecting to the http > server? > I don't see any traffic in tcpdump after pxeboot. > > -Mukarram. > > -----Original Message----- > From: kickstart-list-bounces@xxxxxxxxxx > [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of Coe, Colin > C. (Unix > Engineer) > Sent: Tuesday, May 15, 2007 5:56 PM > To: Discussion list about Kickstart > Subject: RE: Unable to get any http requests:Unabletoretreive > netstg2.imgfile > > > Try changing 'ksdevice=eth0' to 'ksdevice=link'. With 2.6 kernels, > the > kernel's idea of what eth0 and eth1 are often differs from the BIOS/ > PXE > stack. > > CC > >> -----Original Message----- >> From: kickstart-list-bounces@xxxxxxxxxx >> [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of Mukarram Syed >> Sent: Wednesday, 16 May 2007 8:42 AM >> To: 'Discussion list about Kickstart' >> Subject: RE: Unable to get any http requests: >> Unabletoretreive netstg2.imgfile >> >> John, >> Sorry...just to make things clear. >> eth0 works to get the dhcp/tftp request and eth1 does not. >> However, I tried using both is what I meant. >> >> We have a problem with dhcp, the networking folks here did >> not enable "spanning tree" on the switch ports, until that >> happens I am using static >> ip. I double checked the syntax etc. >> >> Thanks >> -Mukarram. >> >> -----Original Message----- >> From: kickstart-list-bounces@xxxxxxxxxx >> [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of John >> Summerfield >> Sent: Tuesday, May 15, 2007 5:32 PM >> To: Discussion list about Kickstart >> Subject: Re: Unable to get any http requests: Unable >> toretreive netstg2.imgfile >> >> Mukarram Syed wrote: >>> Thanks Colin for the quick response >>> >>> >>> >>> Yes. It does have. It's a Dell PE2950. >>> >>> >>> >>> I have already tried that option as well. >>> >>> I tried both ksdevice=eth0 and ksdevice=eth1 and they don't work. >>> >> >> If you can connect all network interfaces, that might help, >> because it then doesn't matter whether either one or both is used. >> >> If you run arpwatch that will report on which interfaces are >> used (by mac address and IP). >> >> More below... >> >>> >>> >>> -Mukarram. >>> >>> >>> >>> >>> >>> _____ >>> >>> From: kickstart-list-bounces@xxxxxxxxxx >>> [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of >> Coe, Colin C. >> (Unix >>> Engineer) >>> Sent: Tuesday, May 15, 2007 4:52 PM >>> To: Discussion list about Kickstart >>> Subject: RE: Unable to get any http requests: Unable to retreive >>> netstg2.imgfile >>> >>> >>> >>> Does the machine you're on have multiple Ethernet >> interfaces? If so, >>> what you may find is adding 'ksdevice=link' will assist. >>> >>> >>> >>> CC >>> >>> >>> >>> >>> _____ >>> >>> >>> From: kickstart-list-bounces@xxxxxxxxxx >>> [mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of >> Mukarram Syed >>> Sent: Wednesday, 16 May 2007 7:50 AM >>> To: kickstart-list@xxxxxxxxxx >>> Subject: Unable to get any http requests: Unable to retreive >>> netstg2.img file >>> >>> Hi >>> >>> I am sure there is some information regarding my request, but I am >>> unable >> to >>> find it, hence the post. >>> >>> >>> >>> I configured my kickstart server using http. >>> >>> I am able to pxeboot the client, but my client is not able >> to get the >>> netstg2.img file from the server. >>> >>> I am able to http into my netstg2.img directory from a web browser >>> from another server in the same subnet successfully. >>> >>> >>> >>> Also I tried to put in a boot cdrom and run the following: >>> >>> Linux ks=http://<ServerIP>/ENT_LINUX_64/Enterprise/ks.cfg >>> ip=<ClientIP> >>> netmask=255.255.255.224 gateway=<GatewayIP> >> >> >> I have never used static IP for ks, I alway configure >> everything I can with dhcp. However, I do know that that's >> not the format the kernel expects for the ip parameter. Check >> your documentation, if I were writing a script tp parse ip= >> then I'd conform to the existing standards (that is, the way >> the kernel expects it), and that's what works with Ubuntu. >> >> >> >>> >>> >>> >>> Still no luck. It goes straight to the cd installer. >>> >>> >>> >>> I tried to tcpdump the traffic on the MAC address of the client, it >> outputs >>> the tftp information and after that it stops. >>> >>> I don't see any http traffic coming from the client. >> >> That's fairly consistent with you specifying ip= incorrectly. >> >> btw, if you're using PXE, the why are you trying to spectify >> static IP info? >> >> btw, as I recall, pxelinux has an option to pass on the IP >> address info it gets in the proper format for the kernel to parse. >> >> >>> >>> >>> >>> I'd appreciate some help in this regard. >>> >>> I've spent all day trying to troubleshoot this but no luck. >>> >>> >>> >>> Thanks Much >>> >>> >>> >>> >>> >>> Mukarram Syed >>> >>> Unix Systems Administrator, >>> >>> Stanford University. >>> >>> >>> >>> >>> NOTICE: This email and any attachments are confidential. >>> They may contain legally privileged information or >>> copyright material. You must not read, copy, use or >>> disclose them without authorisation. If you are not an >>> intended recipient, please contact us at once by return >>> email and then delete both messages and all attachments. >>> >>> >>> >>> >> -------------------------------------------------------------- >> ---------- >>> >>> _______________________________________________ >>> Kickstart-list mailing list >>> Kickstart-list@xxxxxxxxxx >>> https://www.redhat.com/mailman/listinfo/kickstart-list >> >> >> -- >> >> Cheers >> John >> >> -- spambait >> 1aaaaaaa@xxxxxxxxxxxxxxxx Z1aaaaaaa@xxxxxxxxxxxxxxxx >> >> Please do not reply off-list >> >> _______________________________________________ >> Kickstart-list mailing list >> Kickstart-list@xxxxxxxxxx >> https://www.redhat.com/mailman/listinfo/kickstart-list >> >> _______________________________________________ >> Kickstart-list mailing list >> Kickstart-list@xxxxxxxxxx >> https://www.redhat.com/mailman/listinfo/kickstart-list >> > > NOTICE: This email and any attachments are confidential. > They may contain legally privileged information or > copyright material. You must not read, copy, use or > disclose them without authorisation. If you are not an > intended recipient, please contact us at once by return > email and then delete both messages and all attachments. > > _______________________________________________ > Kickstart-list mailing list > Kickstart-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/kickstart-list > > _______________________________________________ > Kickstart-list mailing list > Kickstart-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/kickstart-list _______________________________________________ Kickstart-list mailing list Kickstart-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/kickstart-list
