-----Original Message-----
From: kickstart-list-bounces@xxxxxxxxxx
[mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of Mukarram Syed
Sent: Wednesday, 16 May 2007 8:42 AM
To: 'Discussion list about Kickstart'
Subject: RE: Unable to get any http requests:
Unabletoretreive netstg2.imgfile
John,
Sorry...just to make things clear.
eth0 works to get the dhcp/tftp request and eth1 does not.
However, I tried using both is what I meant.
We have a problem with dhcp, the networking folks here did
not enable "spanning tree" on the switch ports, until that
happens I am using static
ip. I double checked the syntax etc.
Thanks
-Mukarram.
-----Original Message-----
From: kickstart-list-bounces@xxxxxxxxxx
[mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of John
Summerfield
Sent: Tuesday, May 15, 2007 5:32 PM
To: Discussion list about Kickstart
Subject: Re: Unable to get any http requests: Unable
toretreive netstg2.imgfile
Mukarram Syed wrote:
Thanks Colin for the quick response
Yes. It does have. It's a Dell PE2950.
I have already tried that option as well.
I tried both ksdevice=eth0 and ksdevice=eth1 and they don't work.
If you can connect all network interfaces, that might help,
because it then doesn't matter whether either one or both is used.
If you run arpwatch that will report on which interfaces are
used (by mac address and IP).
More below...
-Mukarram.
_____
From: kickstart-list-bounces@xxxxxxxxxx
[mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of
Coe, Colin C.
(Unix
Engineer)
Sent: Tuesday, May 15, 2007 4:52 PM
To: Discussion list about Kickstart
Subject: RE: Unable to get any http requests: Unable to retreive
netstg2.imgfile
Does the machine you're on have multiple Ethernet
interfaces? If so,
what you may find is adding 'ksdevice=link' will assist.
CC
_____
From: kickstart-list-bounces@xxxxxxxxxx
[mailto:kickstart-list-bounces@xxxxxxxxxx] On Behalf Of
Mukarram Syed
Sent: Wednesday, 16 May 2007 7:50 AM
To: kickstart-list@xxxxxxxxxx
Subject: Unable to get any http requests: Unable to retreive
netstg2.img file
Hi
I am sure there is some information regarding my request, but I am
unable
to
find it, hence the post.
I configured my kickstart server using http.
I am able to pxeboot the client, but my client is not able
to get the
netstg2.img file from the server.
I am able to http into my netstg2.img directory from a web browser
from another server in the same subnet successfully.
Also I tried to put in a boot cdrom and run the following:
Linux ks=http://<ServerIP>/ENT_LINUX_64/Enterprise/ks.cfg
ip=<ClientIP>
netmask=255.255.255.224 gateway=<GatewayIP>
I have never used static IP for ks, I alway configure
everything I can with dhcp. However, I do know that that's
not the format the kernel expects for the ip parameter. Check
your documentation, if I were writing a script tp parse ip=
then I'd conform to the existing standards (that is, the way
the kernel expects it), and that's what works with Ubuntu.
Still no luck. It goes straight to the cd installer.
I tried to tcpdump the traffic on the MAC address of the client, it
outputs
the tftp information and after that it stops.
I don't see any http traffic coming from the client.
That's fairly consistent with you specifying ip= incorrectly.
btw, if you're using PXE, the why are you trying to spectify
static IP info?
btw, as I recall, pxelinux has an option to pass on the IP
address info it gets in the proper format for the kernel to parse.
I'd appreciate some help in this regard.
I've spent all day trying to troubleshoot this but no luck.
Thanks Much
Mukarram Syed
Unix Systems Administrator,
Stanford University.
NOTICE: This email and any attachments are confidential.
They may contain legally privileged information or
copyright material. You must not read, copy, use or
disclose them without authorisation. If you are not an
intended recipient, please contact us at once by return
email and then delete both messages and all attachments.
--------------------------------------------------------------
----------
_______________________________________________
Kickstart-list mailing list
Kickstart-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/kickstart-list
--
Cheers
John
-- spambait
1aaaaaaa@xxxxxxxxxxxxxxxx Z1aaaaaaa@xxxxxxxxxxxxxxxx
Please do not reply off-list
_______________________________________________
Kickstart-list mailing list
Kickstart-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/kickstart-list
_______________________________________________
Kickstart-list mailing list
Kickstart-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/kickstart-list
