I'm trying to kickstart a machine, and partition disks on 3 fibre attached LUNs (lpfc/emulex), but the installer only sees the first one (/dev/sda), and not the other two (/dev/sdb, /dev/sdc) Out of the box, the RHEL4 initrd is configured to only discover a single scsi LUN. In order to fix this, you have to use a custom initrd: # echo "options scsi_mod max_luns=xx" >> /etc/modprobe.conf # mkinitrd -f # reboot (where xx > 1) This works fine *after* the box is installed, but is there a way to make this work during the kickstart install? I tried using some %pre scripts, but it didn't work: ---ks.cfg--- ... %pre rmmod scsi_mod modprobe scsi_mod max_luns=128 ... %post echo "options scsi_mod max_luns=255" >> /etc/modprobe.conf mkinitrd -f -v ---ks.cfg--- ---kickstart errors--- *Running kickstart %pre script(s) rmmod: scsi_mod: Resource temporarily unavailable modprobe: could no parse modules.dep * WARNING - Error code 256 encountered running a kickstart %pre/%post * script * All kickstart %pre script(s) have been run * Exception parsing ks.cfg: specified disk sdb in partition command does not exist ---kickstart errors--- Thanks, Jason
