Re: Web camera works intermittently as for recently

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks, ITwrx and George. It appears to be related to Thunar (XFCE),
according to the logs below.

Paul
----------------------------
Oct 12 18:33:54 new-host kernel: usb 1-8: USB disconnect, device number 26
Oct 12 18:33:54 new-host kernel: usb 1-8: new high-speed USB device
number 27 using xhci_hcd
Oct 12 18:33:54 new-host kernel: usb 1-8: New USB device found,
idVendor=04ca, idProduct=707a, bcdDevice= 0.04
Oct 12 18:33:54 new-host kernel: usb 1-8: New USB device strings:
Mfr=3, Product=1, SerialNumber=2
Oct 12 18:33:54 new-host kernel: usb 1-8: Product: EasyCamera 5M
Oct 12 18:33:54 new-host kernel: usb 1-8: Manufacturer: Generic
Oct 12 18:33:54 new-host kernel: [40B blob data]
Oct 12 18:33:54 new-host kernel: uvcvideo: Found UVC 1.00 device
EasyCamera 5M (04ca:707a)
Oct 12 18:33:54 new-host kernel: uvcvideo: Failed to initialize entity
for entity 6
Oct 12 18:33:54 new-host kernel: uvcvideo: Failed to register entities (-22).
Oct 12 18:33:54 new-host kernel: input: EasyCamera 5M: EasyCamera 5M
as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-8/1-8:1.0/input/input40
Oct 12 18:33:54 new-host kernel: hid-generic 0003:04CA:707A.001A:
hiddev96,hidraw2: USB HID v1.11 Device [Generic EasyCamera 5M] on
usb-0000:01:00.0-8/input2
Oct 12 18:33:54 new-host mtp-probe[32631]: checking bus 1, device 27:
"/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-8"
Oct 12 18:33:54 new-host mtp-probe[32631]: bus: 1, device: 27 was not
an MTP device
Oct 12 18:33:54 new-host lightdm[32644]: thunar-volman: Unsupported
USB device type "usb".
Oct 12 18:33:54 new-host mtp-probe[32660]: checking bus 1, device 27:
"/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-8"
Oct 12 18:33:54 new-host mtp-probe[32660]: bus: 1, device: 27 was not
an MTP device
Oct 12 18:33:54 new-host lightdm[32658]: thunar-volman: Unsupported
input device type "(null)".
Oct 12 18:33:54 new-host lightdm[32664]: thunar-volman: Unsupported
input device type "/dev/input/event17".
Oct 12 18:33:54 new-host lightdm[32668]: thunar-volman: Unsupported
USB device type "usbhid".
Oct 12 18:33:55 new-host lightdm[32672]: thunar-volman: Unsupported
USB device type "uvcvideo".
Oct 12 18:33:55 new-host lightdm[32676]: thunar-volman: Unsupported
USB device type "uvcvideo".
Oct 12 18:33:58 new-host kernel: usb 1-8: USB disconnect, device number 27
Oct 12 18:33:59 new-host kernel: usb 1-8: new high-speed USB device
number 28 using xhci_hcd
Oct 12 18:33:59 new-host kernel: usb 1-8: New USB device found,
idVendor=04ca, idProduct=707a, bcdDevice= 0.04
Oct 12 18:33:59 new-host kernel: usb 1-8: New USB device strings:
Mfr=3, Product=1, SerialNumber=2
Oct 12 18:33:59 new-host kernel: usb 1-8: Product: EasyCamera 5M
Oct 12 18:33:59 new-host kernel: usb 1-8: Manufacturer: Generic
Oct 12 18:33:59 new-host kernel: [40B blob data]
Oct 12 18:33:59 new-host kernel: uvcvideo: Found UVC 1.00 device
EasyCamera 5M (04ca:707a)
Oct 12 18:33:59 new-host kernel: uvcvideo: Failed to initialize entity
for entity 6
Oct 12 18:33:59 new-host kernel: uvcvideo: Failed to register entities (-22).
Oct 12 18:33:59 new-host kernel: input: EasyCamera 5M: EasyCamera 5M
as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-8/1-8:1.0/input/input41
Oct 12 18:33:59 new-host kernel: hid-generic 0003:04CA:707A.001B:
hiddev96,hidraw2: USB HID v1.11 Device [Generic EasyCamera 5M] on
usb-0000:01:00.0-8/input2
Oct 12 18:33:59 new-host mtp-probe[32687]: checking bus 1, device 28:
"/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-8"
Oct 12 18:33:59 new-host mtp-probe[32687]: bus: 1, device: 28 was not
an MTP device
Oct 12 18:33:59 new-host lightdm[32700]: thunar-volman: Unsupported
USB device type "usb".
Oct 12 18:33:59 new-host mtp-probe[32713]: checking bus 1, device 28:
"/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-8"
Oct 12 18:33:59 new-host mtp-probe[32713]: bus: 1, device: 28 was not
an MTP device
Oct 12 18:33:59 new-host lightdm[32711]: thunar-volman: Unsupported
input device type "(null)".
Oct 12 18:33:59 new-host lightdm[32717]: thunar-volman: Unsupported
input device type "/dev/input/event17".
Oct 12 18:33:59 new-host lightdm[32721]: thunar-volman: Unsupported
USB device type "uvcvideo".
Oct 12 18:33:59 new-host lightdm[32725]: thunar-volman: Unsupported
USB device type "uvcvideo".
Oct 12 18:33:59 new-host lightdm[32729]: thunar-volman: Unsupported
USB device type "usbhid".





On Mon, Oct 12, 2020 at 5:10 PM ITwrx <info@xxxxxxxxx> wrote:
>
> On 10/12/20 10:01 AM, Paul Smith wrote:
> > Dear All,
> >
> > I have a web camera, which has worked perfectly on Fedora 32. However,
> > recently, it only works intermittently on Skype. Intriguily, if I plug
> > it into a different USB port, the web camera works with no problem.
> > Any ideas?
> >
> > Thanks in advance,
> >
> > Paul
> > _______________________________________________
>
> Paul,
>
> i would check the log via "journalctl -b -0" or similar [1], and use a
> search engine to learn about what you're seeing and narrow things down.
> It should show software issues that might be effecting the cam. It will
> show if the usb is having connection issues. Like some hardware
> failures, bad usb cable, etc. I've seen this happen with usb printers. I
> replaced the cable or used a different port (damaged port) and it was
> fine again.
>
> The first step on many things, is to check the log. Yes, it's low level,
> and can be tedious, but unless you're paying for a support contract
> somewhere, or paid for commercial software, it's really part of your
> (read "our") due diligence, IMHO.
>
> If you've done what you can do, and have some specific things you can't
> figure out, post back and someone might be able to help with that.
>
> Please note, that i'm not trying to act as an authority figure with
> these suggestions, and you're free to scoff at me and post whatever you
> want. :) Also, I'm just another user like you, and don't speak for
> Fedora. They are only friendly recommendations, as some list subscribers
> may be tempted to ignore questions when the preliminary steps have not
> been attempted, and i thought it more helpful to explain all this instead.
>
> 1: https://docs.fedoraproject.org/en-US/quick-docs/viewing-logs/
>
> thanks,
>
> ITwrx
> _______________________________________________
> users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
_______________________________________________
users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx



[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [EPEL Devel]     [Fedora Magazine]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Desktop]     [Fedora Fonts]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Fedora Sparc]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux