Hi;
I bought this laptop over Christmas:
ASUS VivoBook Pro N705FD Notebook, 17.3" FHD Display, Intel Core
i7-8565U Upto 4.60GHz, 32GB RAM, 1TB SSD + 1TB HDD, NVIDIA GeForce
GTX 1050, HDMI, Card Reader, Wi-Fi, Bluetooth, Windows 10 Pro
And I installed Fedora 31 on it.
The HDMI port drives a second monitor fine but the USB-C port will not. I can plug an external drive into the USB-C port and it mounts it fine, however I would like to drive an additional monitor with it.
When I plug an external monitor into the USB-C port I usually see something like this via dmesg:
[100335.446405] usb 1-3: new high-speed USB
device number 11 using xhci_hcd
[100335.919043] usb 1-3: New USB device found, idVendor=2109,
idProduct=0100, bcdDevice= 6.03
[100335.919046] usb 1-3: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
[100335.919048] usb 1-3: Product: USB-C dongle
[100335.919050] usb 1-3: Manufacturer: VIA Technologies
Inc.
[100335.919051] usb 1-3: SerialNumber: 0000000000000001
[100340.101375] usb usb2-port3: Cannot enable. Maybe the USB
cable is bad?
[100344.156355] usb usb2-port4: Cannot enable. Maybe the USB
cable is bad?
Also here is the output of an lspci:
$ lspci
00:00.0 Host bridge: Intel Corporation Coffee Lake HOST and DRAM
Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation UHD
Graphics 620 (Whiskey Lake)
00:04.0 Signal processing controller: Intel Corporation Xeon
E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
(rev 0b)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6
/ E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture
Model
00:12.0 Signal processing controller: Intel Corporation Cannon
Point-LP Thermal Controller (rev 30)
00:14.0 USB controller: Intel Corporation Cannon Point-LP USB
3.1 xHCI Controller (rev 30)
00:14.2 RAM memory: Intel Corporation Cannon Point-LP Shared
SRAM (rev 30)
00:14.3 Network controller: Intel Corporation Cannon Point-LP
CNVi [Wireless-AC] (rev 30)
00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon
Point-LP Serial IO I2C Controller #0 (rev 30)
00:15.1 Serial bus controller [0c80]: Intel Corporation Cannon
Point-LP Serial IO I2C Controller #1 (rev 30)
00:16.0 Communication controller: Intel Corporation Cannon
Point-LP MEI Controller #1 (rev 30)
00:17.0 SATA controller: Intel Corporation Cannon Point-LP SATA
Controller [AHCI Mode] (rev 30)
00:1c.0 PCI bridge: Intel Corporation Cannon Point-LP PCI
Express Root Port #1 (rev f0)
00:1c.4 PCI bridge: Intel Corporation Cannon Point-LP PCI
Express Root Port #5 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Cannon Point-LP PCI
Express Root Port #9 (rev f0)
00:1e.0 Communication controller: Intel Corporation Device 9da8
(rev 30)
00:1e.2 Serial bus controller [0c80]: Intel Corporation Device
9daa (rev 30)
00:1f.0 ISA bridge: Intel Corporation Cannon Point-LP LPC
Controller (rev 30)
00:1f.3 Audio device: Intel Corporation Cannon Point-LP High
Definition Audio Controller (rev 30)
00:1f.4 SMBus: Intel Corporation Cannon Point-LP SMBus
Controller (rev 30)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon
Point-LP SPI Controller (rev 30)
02:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX
1050 Mobile] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev
15)
Thoughts?
Thanks in advance...
_______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@xxxxxxxxxxxxxxxxxxxxxxx
