On 22.01.2017 21:49, Stephen Morris wrote: > On 23/01/2017 00:43, poma wrote: >> On 21.01.2017 21:00, poma wrote: >>> On 17.01.2017 22:12, Stephen Morris wrote: >>> [...] >>>> The lsusb output for that device is also below. >>>> >>>> Bus 010 Device 002: ID 2001:331a D-Link Corp. >>>> >>> [...] >>> >>> D-Link DWA-192 - Realtek RTL8814AU WiFi USB 3.0 >>> >>> https://wikidevi.com/wiki/D-Link_DWA-192 >>> http://support.dlink.com/ProductInfo.aspx?m=DWA-192 >>> ftp://files.dlink.com.au/products/DWA-192 >>> https://openitforum.pl/index/recenzje/karty/d-link-dwa-192-r225 >>> >>> https://wikidevi.com/wiki/Edimax_EW-7833UAC >>> http://www.edimax.com/edimax/download/download/data/edimax/global/download/for_home/wireless_adapters/wireless_adapters_ac1750_dual-band/ew-7833uac >>> http://www.edimax.com/edimax/mw/cufiles/files/download/Driver_Utility/EW-7833UAC_linux_4.3.21_kernel_3.16-4.4.zip >>> >>> https://github.com/pld-linux/rtl8812au >>> https://github.com/diederikdehaas/rtl8812AU >>> >>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >>> >>> $ unzip EW-7833UAC_linux_4.3.21_kernel_3.16-4.4.zip >>> $ cd EW7833UAC_linux_4.3.21_kernel_3.16-4.4/EW7833UAC_linux_v4.3.21_17997.20160531/ >>> >>> $ curl -s https://raw.githubusercontent.com/pld-linux/rtl8812au/master/disable-debug.patch | patch -p1 >>> $ curl -s https://github.com/diederikdehaas/rtl8812AU/commit/e6d6beb.patch | patch -p1 >>> $ curl -s https://raw.githubusercontent.com/pld-linux/rtl8812au/master/linux-4.7.patch | patch -p1 >>> $ curl -s https://raw.githubusercontent.com/pld-linux/rtl8812au/master/linux-4.8.patch | patch -p1 >>> >>> $ make -j3 >>> $ su >>> # cp 8814au.ko /lib/modules/$(uname -r)/updates/ >>> # depmod >>> # modinfo 8814au | grep 2001 >>> >>> # modprobe -v 8814au >>> # dmesg: >>> ... >>> RTL871X: module init start >>> RTL871X: rtl8814au v4.3.21_17997.20160531 >>> RTL871X: build time: Jan 21 2017 20:04:38 >>> usbcore: registered new interface driver rtl8814au >>> RTL871X: module init ret=0 >>> ... >>> # modprobe -rv 8814au >>> # dmesg: >>> ... >>> RTL871X: module exit start >>> usbcore: deregistering interface driver rtl8814au >>> RTL871X: module exit success >>> ... >>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >>> >>> Wifi ball works now? >>> >>> >>> HW add. >>> https://wikidevi.com/wiki/ASUS_USB-AC68 >>> https://www.asus.com/Networking/USB-AC68/HelpDesk_Download >>> >>> https://wikidevi.com/wiki/TP-LINK_Archer_T9UH >>> http://www.tp-link.com/en/download/Archer-T9UH.html >>> >>> https://wikidevi.com/wiki/TRENDnet_TEW-809UB >>> https://www.trendnet.com/support/supportdetail.asp?prod=100_TEW-809UB >>> >>> SW add. >>> https://github.com/abperiasamy/rtl8812AU_8821AU_linux >>> https://github.com/austinmarton/rtl8812au_linux >>> >>> >>> >> OR >> according to "rtl8814au? #10" >> https://github.com/diederikdehaas/rtl8812AU/issues/10 >> >> $ git clone -b driver-4.3.21 https://github.com/uminokoe/rtl8812AU.git RTL8814AU-uminokoe >> $ cd RTL8814AU-uminokoe/ >> $ git revert -n 9260f77 8d33100 >> // "Disabled debugging code." >> $ curl -s https://github.com/diederikdehaas/rtl8812AU/commit/3e80ebc.patch | patch -p1 >> // Enables CONFIG_MP_VHT_HW_TX_MODE >> $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile >> $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile >> >> OR >> $ git clone https://github.com/diederikdehaas/rtl8814AU.git RTL8814AU-diederikdehaas >> $ cd RTL8814AU-diederikdehaas/ >> // Adds missing Vendor/Product ID >> $ sed -i '/0xA834/ a\\t{USB_DEVICE(0x7392, 0xA833), .driver_info = RTL8814A}, /* Edimax - Edimax */' os_dep/linux/usb_intf.c >> // "Added VHT capabilities." >> $ curl -s https://github.com/uminokoe/rtl8812AU/commit/5f75242.patch | patch -p1 >> // Enables CONFIG_MP_VHT_HW_TX_MODE >> $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile >> $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile >> >> >> $ make -j3 >> $ su >> # cp 8814au.ko /lib/modules/$(uname -r)/updates/ >> # depmod >> # modinfo 8814au >> >> # modprobe -v 8814au >> # dmesg: >> ... >> RTL871X: module init start >> RTL871X: rtl8814au v4.3.21_17997.20160531 >> usbcore: registered new interface driver rtl8814au >> RTL871X: module init ret=0 >> ... >> # modprobe -rv 8814au >> # dmesg: >> ... >> RTL871X: module exit start >> usbcore: deregistering interface driver rtl8814au >> RTL871X: module exit success >> ... >> >> >> Hello Diederik, >> it seems there are only two Linux RTL8814AU users, so far. >> >> Morris, when you catch some time, would you mind to run a couple iperf tests with DWA-192, >> to see real network throughput results. > I can't run any at the moment because Fedora is refusing to actually use > the device at all. > > I have also just upgraded to F25 and nothing has changed. > > The last time I used this device was on 08/10/2016 and it was using the > ATH9K driver. The main reason I upgraded to this USB device was that I > upgraded my router to a faster version, and I found that unlike the > DWA182 I didn't have to compile my own driver, the kernel had inbuilt > support for the DWA192. > > It is possible that I have managed to Blacklist the device in some way, > not by the conventional Blacklist.conf, and I have forgotten how so I > can't find where I've done it to reverse it. > > Also, having never done it before, I also don't know how to run iperf tests. > > regards, > Steve > Did I understand you correctly, what you're saying here is that: D-Link DWA-192 - Realtek RTL8814AU WiFi USB 3.0 therefore the USB based device, was driven by: $ modinfo --description ath9k Support for Atheros 802.11n wireless LAN cards. https://wireless.wiki.kernel.org/en/users/drivers/ath9k "ath9k is a completely FOSS wireless driver for all Atheros IEEE 802.11n PCI/PCI-Express and AHB WLAN based chipsets." https://wiki.debian.org/ath9k "Atheros 802.11n PCI/PCI-E devices (ath9k)" _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
