On 21.01.2017 21:00, poma wrote: > On 17.01.2017 22:12, Stephen Morris wrote: > [...] >> The lsusb output for that device is also below. >> >> Bus 010 Device 002: ID 2001:331a D-Link Corp. >> > [...] > > D-Link DWA-192 - Realtek RTL8814AU WiFi USB 3.0 > > https://wikidevi.com/wiki/D-Link_DWA-192 > http://support.dlink.com/ProductInfo.aspx?m=DWA-192 > ftp://files.dlink.com.au/products/DWA-192 > https://openitforum.pl/index/recenzje/karty/d-link-dwa-192-r225 > > https://wikidevi.com/wiki/Edimax_EW-7833UAC > http://www.edimax.com/edimax/download/download/data/edimax/global/download/for_home/wireless_adapters/wireless_adapters_ac1750_dual-band/ew-7833uac > http://www.edimax.com/edimax/mw/cufiles/files/download/Driver_Utility/EW-7833UAC_linux_4.3.21_kernel_3.16-4.4.zip > > https://github.com/pld-linux/rtl8812au > https://github.com/diederikdehaas/rtl8812AU > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > $ unzip EW-7833UAC_linux_4.3.21_kernel_3.16-4.4.zip > $ cd EW7833UAC_linux_4.3.21_kernel_3.16-4.4/EW7833UAC_linux_v4.3.21_17997.20160531/ > > $ curl -s https://raw.githubusercontent.com/pld-linux/rtl8812au/master/disable-debug.patch | patch -p1 > $ curl -s https://github.com/diederikdehaas/rtl8812AU/commit/e6d6beb.patch | patch -p1 > $ curl -s https://raw.githubusercontent.com/pld-linux/rtl8812au/master/linux-4.7.patch | patch -p1 > $ curl -s https://raw.githubusercontent.com/pld-linux/rtl8812au/master/linux-4.8.patch | patch -p1 > > $ make -j3 > $ su > # cp 8814au.ko /lib/modules/$(uname -r)/updates/ > # depmod > # modinfo 8814au | grep 2001 > > # modprobe -v 8814au > # dmesg: > ... > RTL871X: module init start > RTL871X: rtl8814au v4.3.21_17997.20160531 > RTL871X: build time: Jan 21 2017 20:04:38 > usbcore: registered new interface driver rtl8814au > RTL871X: module init ret=0 > ... > # modprobe -rv 8814au > # dmesg: > ... > RTL871X: module exit start > usbcore: deregistering interface driver rtl8814au > RTL871X: module exit success > ... > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Wifi ball works now? > > > HW add. > https://wikidevi.com/wiki/ASUS_USB-AC68 > https://www.asus.com/Networking/USB-AC68/HelpDesk_Download > > https://wikidevi.com/wiki/TP-LINK_Archer_T9UH > http://www.tp-link.com/en/download/Archer-T9UH.html > > https://wikidevi.com/wiki/TRENDnet_TEW-809UB > https://www.trendnet.com/support/supportdetail.asp?prod=100_TEW-809UB > > SW add. > https://github.com/abperiasamy/rtl8812AU_8821AU_linux > https://github.com/austinmarton/rtl8812au_linux > > > OR according to "rtl8814au? #10" https://github.com/diederikdehaas/rtl8812AU/issues/10 $ git clone -b driver-4.3.21 https://github.com/uminokoe/rtl8812AU.git RTL8814AU-uminokoe $ cd RTL8814AU-uminokoe/ $ git revert -n 9260f77 8d33100 // "Disabled debugging code." $ curl -s https://github.com/diederikdehaas/rtl8812AU/commit/3e80ebc.patch | patch -p1 // Enables CONFIG_MP_VHT_HW_TX_MODE $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile OR $ git clone https://github.com/diederikdehaas/rtl8814AU.git RTL8814AU-diederikdehaas $ cd RTL8814AU-diederikdehaas/ // Adds missing Vendor/Product ID $ sed -i '/0xA834/ a\\t{USB_DEVICE(0x7392, 0xA833), .driver_info = RTL8814A}, /* Edimax - Edimax */' os_dep/linux/usb_intf.c // "Added VHT capabilities." $ curl -s https://github.com/uminokoe/rtl8812AU/commit/5f75242.patch | patch -p1 // Enables CONFIG_MP_VHT_HW_TX_MODE $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile $ make -j3 $ su # cp 8814au.ko /lib/modules/$(uname -r)/updates/ # depmod # modinfo 8814au # modprobe -v 8814au # dmesg: ... RTL871X: module init start RTL871X: rtl8814au v4.3.21_17997.20160531 usbcore: registered new interface driver rtl8814au RTL871X: module init ret=0 ... # modprobe -rv 8814au # dmesg: ... RTL871X: module exit start usbcore: deregistering interface driver rtl8814au RTL871X: module exit success ... Hello Diederik, it seems there are only two Linux RTL8814AU users, so far. Morris, when you catch some time, would you mind to run a couple iperf tests with DWA-192, to see real network throughput results. _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
