On Wed, Jul 27, 2016 at 7:10 PM, Jose Maria Terry Jimenez <jtj@xxxxxxxxxxxxx> wrote:
El 27/07/16 a las 15:22, Manish Kathuria escribió:
Can you access the router's print server port via telnet?
On Wed, Jul 27, 2016 at 9:00 AM, Tim <ignored_mailbox@xxxxxxxxxxxx> wrote:
Allegedly, on or about 26 July 2016, Manish Kathuria sent:
> The D-Link documentation suggests specifying
> http://172.16.100.1:631/printers/HP as the Printer URI. This
> configuration works very well over the network while using a Windows
> system but it does not print at all from the Fedora machine even after
> trying various permutations and combinations.
I'm going to ask the obvious question: Is your Linux computer in the
same subnet as the printer? (i.e. 172.16..)
YesIs that the IP of the printer?
For what it's worth, even if it is, browsing to that IP may not do you
any good. They may simply have the printer listening, without providing
any interface. That's what my HP LaserJet 4M does (it's there on the
network, listening and printing, but doesn't provide any kind of
interface to the outside world).
Exactly. It does not let me browse.
Is that the IP of the router?
The printer's IP is the same as the wireless router (i.e. 172.16.100.1 and the Linux system is 172.16.100.x)
In that case, I'd expect that the router is acting as an internet
printing server, and ought to have some kind of interface. But you may
have more luck going to the root of the server (instead of directly to
the printer address), <http://172.16.100.1:631/>, to see if that gives
you an interface.
Tried that also, and it did not show anything on the browser. The process list on the DLink Router shows a program named ippd running which provides the interface to the printer.
telnet 172.16.100.1 631
Yes, it works.
If not try disabling the Fedora's firewall.
Also, last week i had a problem with a customer, and it was he configured a wrong net mask in the Linux box.
I suppose that ping and traceroute to the printserver's IP give the expected results, did you tried it?
Network connectivity is fine. Probably its just compatibility. I felt that it should work since the print server itself (and the router device) is Linux based.
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://lists.fedoraproject.org/admin/lists/users@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
