Re: Printing From Fedora to HP Laser Jet 1020 on D-Link Print Server

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Wed, Jul 27, 2016 at 9:00 AM, Tim <ignored_mailbox@xxxxxxxxxxxx> wrote:
Allegedly, on or about 26 July 2016, Manish Kathuria sent:
> The D-Link documentation suggests specifying
> http://172.16.100.1:631/printers/HP as the Printer URI. This
> configuration works very well over the network while using a Windows
> system but it does not print at all from the Fedora machine even after
> trying various permutations and combinations.

I'm going to ask the obvious question:  Is your Linux computer in the
same subnet as the printer?  (i.e. 172.16..)


Yes
 
Is that the IP of the printer?



 
For what it's worth, even if it is, browsing to that IP may not do you
any good.  They may simply have the printer listening, without providing
any interface.  That's what my HP LaserJet 4M does (it's there on the
network, listening and printing, but doesn't provide any kind of
interface to the outside world).

Exactly. It does not let me browse. 

Is that the IP of the router?

The printer's IP is the same as the wireless router (i.e. 172.16.100.1 and the Linux system is 172.16.100.x) 

In that case, I'd expect that the router is acting as an internet
printing server, and ought to have some kind of interface.  But you may
have more luck going to the root of the server (instead of directly to
the printer address), <http://172.16.100.1:631/>, to see if that gives
you an interface.

Tried that also, and it did not show anything on the browser. The process list on the DLink Router shows a program named ippd running which provides the interface to the printer. 

 
Other things to consider:

How is the Windows box printing to the printer?  Is it pre-rendering, or
is it sending generic printing data to the server, and the server
rendering for the specific printer.  You may have to do the same thing.

It is a ZjStream printer (also termed as a GDI / host based printer by many) where the rendering takes place on the Windows PC. On Linux, the printing is made possible using the foo2zjs driver or the HPLIP. I have tried using those drivers while configuring it as a network printer but it does not work. Whenever the printer is connected to the USB port on the Linux system and switched on a firmware file is pushed to it. I think that's not happening when its connected to the print server.

On Linux, a computer can send PostScript or PDF to a printer server, and
have it talk to the printer in its own language.  Or, you can pre-render
on the computer, and send that directly to the printer.  In the past,
I'd found that CUPs could automatically handle both types, but other
people say that you had to set up specific printer queues for each.

--
[tim@localhost ~]$ uname -rsvp
Linux 3.9.10-100.fc17.x86_64 #1 SMP Sun Jul 14 01:31:27 UTC 2013 x86_64

Boilerplate:  All mail to my mailbox is automatically deleted, there is
no point trying to privately email me, I only get to see the messages
posted to the mailing list.

If you don't understand how e-mail threading works, then follow the
instructions given by those who do, and don't argue with them.


--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://lists.fedoraproject.org/admin/lists/users@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [EPEL Devel]     [Fedora Magazine]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Desktop]     [Fedora Fonts]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Fedora Sparc]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux