On 12/09/2015 09:51 AM, Cristian Sava wrote:
On Wed, 2015-12-09 at 10:41 +0200, Cristian Sava wrote:I Installed F23 Server with static address but after updating that it got an automatic one. Why that? I consider that extremely dangerous. That was verified and happened on different hardware boxes. Do I miss something? Does anyone else saw that? This is what I have (eno1 wired, eth1 not connected): [root@s217 network-scripts]# ls ifcfg-* ifcfg-eno1 ifcfg-eth1 ifcfg-lo [root@s217 network-scripts]# cat ifcfg-eno1 HWADDR=00:1E:67:8B:B9:31 TYPE=Ethernet BOOTPROTO=none DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=no NAME=eno1 UUID=8daf047d-e944-4305-b47f-6f2104edf9a2 ONBOOT=yes IPADDR=111.222.333.217 PREFIX=27 GATEWAY=111.222.333.193 DNS1=111.222.333.254 DOMAIN=domain.me IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_PRIVACY=no [root@s217 network-scripts]# cat ifcfg-eth1 cat: cat: No such file or directory HWADDR=00:1E:67:8B:B9:30 TYPE=Ethernet BOOTPROTO=dhcp DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=eth1 UUID=0d9c850a-1545-481c-897f-84d4475e0377 ONBOOT=yes [root@s217 network-scripts]# ip route default via 172.18.0.1 dev eno1 proto static metric 100 172.18.0.0/16 dev eno1 proto kernel scope link src 172.18.172.146 metric 100 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 111.222.333.193 via 172.18.0.1 dev eno1 proto dhcp metric 100 [root@s217 network-scripts]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000 link/ether 00:1e:67:8b:b9:31 brd ff:ff:ff:ff:ff:ff 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 00:1e:67:8b:b9:30 brd ff:ff:ff:ff:ff:ff inet 172.18.172.146/16 brd 172.18.255.255 scope global dynamic eno1 valid_lft 949sec preferred_lft 949sec inet6 fe80::21e:67ff:fe8b:b930/64 scope link valid_lft forever preferred_lft forever 4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default link/ether 52:54:00:62:c8:4a brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 valid_lft forever preferred_lft forever 5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN group default qlen 500 link/ether 52:54:00:62:c8:4a brd ff:ff:ff:ff:ff:ff [root@s217 network-scripts]# C.S.Sorry for this copy&paste error cat: cat: No such file or directory It is: [root@s217 network-scripts]# cat ifcfg-eth1 HWADDR=00:1E:67:8B:B9:30 TYPE=Ethernet ...
Might BOOTPROTO=static help? suomi -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
