On Wed, 2015-12-09 at 10:41 +0200, Cristian Sava wrote: > I Installed F23 Server with static address but after updating that it > got an automatic one. Why that? I consider that extremely dangerous. > That was verified and happened on different hardware boxes. > Do I miss something? Does anyone else saw that? > This is what I have (eno1 wired, eth1 not connected): > > > [root@s217 network-scripts]# ls ifcfg-* > ifcfg-eno1 ifcfg-eth1 ifcfg-lo > [root@s217 network-scripts]# cat ifcfg-eno1 > HWADDR=00:1E:67:8B:B9:31 > TYPE=Ethernet > BOOTPROTO=none > DEFROUTE=yes > IPV4_FAILURE_FATAL=yes > IPV6INIT=yes > IPV6_AUTOCONF=yes > IPV6_DEFROUTE=yes > IPV6_FAILURE_FATAL=no > NAME=eno1 > UUID=8daf047d-e944-4305-b47f-6f2104edf9a2 > ONBOOT=yes > IPADDR=111.222.333.217 > PREFIX=27 > GATEWAY=111.222.333.193 > DNS1=111.222.333.254 > DOMAIN=domain.me > IPV6_PEERDNS=yes > IPV6_PEERROUTES=yes > IPV6_PRIVACY=no > [root@s217 network-scripts]# cat ifcfg-eth1 > cat: cat: No such file or directory > HWADDR=00:1E:67:8B:B9:30 > TYPE=Ethernet > BOOTPROTO=dhcp > DEFROUTE=yes > PEERDNS=yes > PEERROUTES=yes > IPV4_FAILURE_FATAL=no > IPV6INIT=yes > IPV6_AUTOCONF=yes > IPV6_DEFROUTE=yes > IPV6_PEERDNS=yes > IPV6_PEERROUTES=yes > IPV6_FAILURE_FATAL=no > NAME=eth1 > UUID=0d9c850a-1545-481c-897f-84d4475e0377 > ONBOOT=yes > [root@s217 network-scripts]# ip route > default via 172.18.0.1 dev eno1 proto static metric 100 > 172.18.0.0/16 dev eno1 proto kernel scope link src > 172.18.172.146 metric 100 > 192.168.122.0/24 dev virbr0 proto kernel scope link src > 192.168.122.1 > 111.222.333.193 via 172.18.0.1 dev eno1 proto dhcp metric 100 > [root@s217 network-scripts]# ip addr > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > group default > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > valid_lft forever preferred_lft forever > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel > state DOWN group default qlen 1000 > link/ether 00:1e:67:8b:b9:31 brd ff:ff:ff:ff:ff:ff > 3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel > state UP group default qlen 1000 > link/ether 00:1e:67:8b:b9:30 brd ff:ff:ff:ff:ff:ff > inet 172.18.172.146/16 brd 172.18.255.255 scope global dynamic > eno1 > valid_lft 949sec preferred_lft 949sec > inet6 fe80::21e:67ff:fe8b:b930/64 scope link > valid_lft forever preferred_lft forever > 4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue > state DOWN group default > link/ether 52:54:00:62:c8:4a brd ff:ff:ff:ff:ff:ff > inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 > valid_lft forever preferred_lft forever > 5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master > virbr0 state DOWN group default qlen 500 > link/ether 52:54:00:62:c8:4a brd ff:ff:ff:ff:ff:ff > [root@s217 network-scripts]# > > C.S. > Sorry for this copy&paste error cat: cat: No such file or directory It is: [root@s217 network-scripts]# cat ifcfg-eth1 HWADDR=00:1E:67:8B:B9:30 TYPE=Ethernet ... -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
