On Tue, 2015-05-26 at 11:33 -0700, Joe Zeff wrote: > I thought that crystal oscillators were used for the same reason > musicians use tuning forks: it doesn't matter how hard you hit them, > you always get the same frequency. They hum (the ringing after the blow) on pitch, for a prolonged period. But you wouldn't use the initial strike, or rely on them as it's on the verge of petering out. Stringed instruments go flat (slightly) after the initial strike. And they should be tuned for how you play them. If you play hard, then you need to tune them while plucking the string strongly. If you play gentle, you need to tune them that way, too. In neither case, pluck the string once and fiddle with tuning while it simply rings. I'd expect the same for any mechanically vibrating musical instrument, particularly ones with large parts. There's a tension change with a strong initial strike or pluck, that changes the pitch. You can google how to properly tune a guitar to read more about this (e.g. from recording studio techs), and see demo videos. I would expect a similar thing with a tuning fork. However, as they're designed as a tuning tool, the settling period is probably so much faster that you're not going to strike it as a problem (pun intended). ----------------- Even crystal controlled things do go off pitch, for unknown reasons. I've certainly heard my (over-computerised) organ falter in the middle of playing. But without having a multimeter handy at the time, I couldn't tell if it was due to a mains brown out or an internal fault. We now return you to your regular programming... -- tim@localhost ~]All mail to my mailbox is automatically deleted, there is no point trying to privately email me, I will only read messages posted to the public lists. -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
