Re: WiFi - Realtek - rtl8812au

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/02/2015 10:07 AM, poma wrote:
On 01.02.2015 22:57, poma wrote:
On 01.02.2015 21:19, Stephen Morris wrote:
On 01/30/2015 10:26 AM, poma wrote:
On 29.01.2015 23:00, Stephen Morris wrote:
On 01/30/2015 08:34 AM, Stephen Morris wrote:
On 01/30/2015 06:47 AM, poma wrote:
On 29.01.2015 20:25, poma wrote:
...
Try this
$ git clone https://github.com/vsurrel/rtl8812AU_8821AU_linux.git

$ cd rtl8812AU_8821AU_linux/
$ git log -1
commit 7a427372bf5540285d95f090ad5523019a365415
Author: MilhouseVH <milhouseVH.github@xxxxxxxxxxxx>
Date:   Thu Dec 18 11:42:48 2014 +0000

       Add support for kernel 3.18

Also try PLD Linux method:

$ curl -JLO
https://github.com/pld-linux/rtl8812au/archive/master.tar.gz
$ tar xf rtl8812au-master.tar.gz

$ curl -JLO
https://github.com/austinmarton/rtl8812au_linux/archive/master.tar.gz
$ tar xf rtl8812au_linux-master.tar.gz

$ cp rtl8812au-master/*.patch rtl8812au_linux-master/

$ cd rtl8812au_linux-master/

$ patch -p1 < linux-3.11.patch
$ patch -p1 < disable-debug.patch
$ patch -p1 < enable-cfg80211-support.patch
$ patch -p1 < update-cfg80211-support.patch
$ patch -p1 < warnings.patch
$ patch -p1 < gcc-4.9.patch
$ patch -p1 < linux-3.18.patch

$ make

$ su

# cp 8812au.ko /lib/modules/$(uname -r)/updates/
# depmod
# modprobe -v 8812au

# dmesg
...
RTL871X: module init start
RTL871X: rtl8812au v4.3.2_11100.20140411
RTL871X: build time: Jan 29 2015 20:10:14
usbcore: registered new interface driver rtl8812au
RTL871X: module init ret=0


Ref.
Driver for AC1200 (802.11ac) Wireless Dual-Band USB Adapter
https://github.com/pld-linux/rtl8812au
&
rtl8812au Linux driver (v4.3.2 fork) for Realtek based 802.11ac devices
https://github.com/austinmarton/rtl8812au_linux
=
ftp://master-ftp.pld-linux.org/dists/3.0/PLD/SRPMS/RPMS/rtl8812au-4.3.2_11100.20140411-0.20140901.6@3.18.4_1.src.rpm



This repo is also interesting:

Rewrite RTL 8812 driver
https://github.com/ulli-kroll/rtl8821au

even has firmwares:
$ ls rtl8821au/firmware/
rtl8812aufw.bin  rtl8821aufw.bin

make produces:
... error: macro "__DATE__"
... error: macro "__TIME__"

Classic! :)
That's the error I was getting with the original program that led to
this thread.
I'll also try the PLD drivers and see how they go.
I've run the PLD patch process and the make to build the driver which I
am using at the moment. I'll monitor this for a while and see how it
goes. I'll also need to do the compile again as I have also just done an
update run which has updated to the 3.18 kernel.
Take your time, man.

BTW what Vendor & Product/Model is that RTL8812AU device,
what is the output of 'lsusb'?
Also you mentioned Belkin router, what Vendor & Product/Model is it?

http://www.dd-wrt.com/wiki/index.php/Supported_Devices
https://wikidevi.com/wiki/Main_Page
The usb adapter is a  Dlink DWA-182, its model number is DWA180A1. Lsusb
doesn't show much at all but is below. Bus 003 Device 002 is the adapter.
Just as a matter of interest what is Foundation 2.0 in the display below?
The modem/router is a Belkin 922 AC1750 with model number F9J1108V2.

Router
This is the nearest to specification of what I found
https://wikidevi.com/wiki/Belkin_F9K1115_v2
http://www.amazon.com/Belkin-Dual-Band-Gigabit-Router-F9K1115/dp/B004U6NS5Y

Did I already mention Qualcomm Atheros QCA9880 somewhere. :)

But probably yours is UK version
http://www.amazon.co.uk/AC1750-MODEM-ROUTER-POWER-BUD/dp/B00LVS6O3C

Without FCC ID I cannot conclude what is actual device.

You're right as far as DD-WRT support
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=874183


Bus 003 Device 002: ID 2001:3315 D-Link Corp.
Adapter
If the reference are VID & PID
https://wikidevi.com/wiki/D-Link_DWA-182_rev_C1
It is USB 3.0 device?
# lsusb -v -d 2001:3315 | grep bcd
I issued this command which didn't display much, but the output is below. The first line is very interesting.

Couldn't open device, some information will be missing
  bcdUSB               2.10
  bcdDevice            0.00


Does "PLD Linux method" work?
Is that the only 802.11ac adapter you have?
If you can it would be nice to make measurements with 'iperf'.


begin:vcard
fn:Stephen Morris
n:Morris;Stephen
email;internet:samorris@xxxxxxxxxxxxxxx
x-mozilla-html:TRUE
version:2.1
end:vcard

-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [EPEL Devel]     [Fedora Magazine]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Desktop]     [Fedora Fonts]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Fedora Sparc]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux