On Thu, 2014-02-20 at 17:11 +1100, Roger wrote: > >> Has anyone in Linuxland who is also using w7pro experienced printing > >> issues, particularly with Brother laser and worked out what caused > >> the failure. Thanks, and apologies in advance for a non Linux issue. > >> Roger > > > Thanks to all who responded. > The owner managed to get to a Brother service tech and was told that the > USB ports on his computer were not communicating with the printer, He > switched to eth0 and the printer works. So the USB ports are all of a > sudden only good for keyboard and microphone. I had a similar issue with an HP all-in-one printer and ended up switching to a different USB port and eventually worked. I know some come with different versions (2, 3, etc..) of USB ports so it might have partly been that. Although if it was plugged into one of them, and all of a sudden stopped while plugged into same port, then sounds buggy to me. Maybe something in the BIOS or something turned off that port, or something from MS. Anyway, glad it's working and if using eth0 port, might work better and/or faster. -- Mike Chambers Madisonville, KY "Best little town on Earth!" -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
