Dear Fedora fans,
I have a dual head system with an HP monitor on DVI and
samsung on VGA.
It was working with both at 1280x1024, but gnome 3 in fallback mode.
Some update
last week suddenly brought the gnome-3 experience. Progress!
Unfortunately it also
no longer find the Samsung monitor correctly. I append below a snippet
from Xorg.log
from a month ago (top) and today (bottom).
I think /etc/X11/xorg.conf is deprecated. Can anyone suggest how I
force in higher
resolution now? Or guess what might _really_ be wrong?
Thank you,
Bill
===================================================
April:
[208938.937] (II) intel(0): Output VGA1 has no monitor section
[208939.003] (II) intel(0): Output DVI1 has no monitor section
[208939.053] (II) intel(0): EDID for output VGA1
[208939.053] (II) intel(0): Manufacturer: SAM Model: 574 Serial#:
1297690935
[208939.053] (II) intel(0): Year: 2009 Week: 41
[208939.053] (II) intel(0): EDID Version: 1.3
[208939.053] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.300 V
[208939.053] (II) intel(0): Sync: Separate Composite SyncOnGreen
[208939.053] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[208939.053] (II) intel(0): Gamma: 2.20
[208939.053] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[208939.053] (II) intel(0): First detailed timing is preferred mode
[208939.053] (II) intel(0): redX: 0.648 redY: 0.339 greenX: 0.292
greenY: 0.603
[208939.053] (II) intel(0): blueX: 0.143 blueY: 0.070 whiteX: 0.312
whiteY: 0.329
[208939.053] (II) intel(0): Supported established timings:
[208939.053] (II) intel(0): 720x400@70Hz
[208939.053] (II) intel(0): 640x480@60Hz
[208939.053] (II) intel(0): 640x480@67Hz
[208939.053] (II) intel(0): 640x480@72Hz
[208939.053] (II) intel(0): 640x480@75Hz
[208939.053] (II) intel(0): 800x600@56Hz
[208939.053] (II) intel(0): 800x600@60Hz
[208939.053] (II) intel(0): 800x600@72Hz
[208939.053] (II) intel(0): 800x600@75Hz
[208939.053] (II) intel(0): 832x624@75Hz
[208939.053] (II) intel(0): 1024x768@60Hz
[208939.053] (II) intel(0): 1024x768@70Hz
[208939.053] (II) intel(0): 1024x768@75Hz
[208939.053] (II) intel(0): 1280x1024@75Hz
[208939.053] (II) intel(0): 1152x864@75Hz
====================================================
Today:
[ 49.074] (II) intel(0): Output VGA1 has no monitor section
[ 49.141] (II) intel(0): Output DVI1 has no monitor section
[ 49.159] (II) intel(0): EDID for output VGA1
[ 49.159] (II) intel(0): Printing probed modes for output VGA1
[ 49.159] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 49.159] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 49.159] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 49.159] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976
1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 49.159] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 489 492 525 -hsync -vsync (31.5 kHz e)
--
Bill Murray ---- ATLAS
STFC RAL at: Bat 40-4-C26, CERN,1211 Meyrin, Geneve 23, Switzerland
Tel:- CERN +41 22 7678432 or RAL +44 (0)1235 446256
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
