Now that I've got it working on my testbed server which was F17 I've tried to install it on one of my production servers, running Fedora 14. Unfortunately, although the ports are detected on startup and look very similar to they did on F17 but when I try to access either of the ports I get errors in /var/log/messages. The errors start as soon as I start minicom and stop as soon as I exit. Anyone got any ideas? Gary [root@lou ~]# dmesg|grep tty [ 0.000000] console [tty0] enabled [ 1.261319] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.261837] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.262197] 0000:04:05.0: ttyS1 at I/O 0xec00 (irq = 17) is a XScale [ 1.262324] 0000:04:05.0: ttyS2 at I/O 0xe880 (irq = 17) is a XScale [ 450.720389] usb 3-2: pl2303 converter now attached to ttyUSB0 [ 570.987338] ttyS1: LSR safety check engaged! [ 573.994557] ttyS1: LSR safety check engaged! [ 598.446366] ttyS1: LSR safety check engaged! [ 599.301149] ttyS1: LSR safety check engaged! [ 599.452151] ttyS1: LSR safety check engaged! [ 599.653154] ttyS1: LSR safety check engaged! [ 599.845144] ttyS1: LSR safety check engaged! [ 600.013189] ttyS1: LSR safety check engaged! [ 600.237152] ttyS1: LSR safety check engaged! [ 600.333148] ttyS1: LSR safety check engaged! [ 600.533156] ttyS1: LSR safety check engaged! [ 600.668141] ttyS1: LSR safety check engaged! [ 600.764141] ttyS1: LSR safety check engaged! [ 600.916140] ttyS1: LSR safety check engaged! [ 601.044150] ttyS1: LSR safety check engaged! [ 601.133126] ttyS1: LSR safety check engaged! -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
