On Mon, Jul 16, 2012 at 11:54 AM, Mateusz Marzantowicz <mmarzantowicz@xxxxxxxxxxx> wrote:
What about this: https://bugzilla.redhat.com/show_bug.cgi?id=753648 ?On 16.07.2012 16:47, Mark Haney wrote:
> This one might be a lot harder. I installed (fresh) F17 on my new
> 6-core Phenom II system. I normally will keep that server on and
> accessible via ssh from the internet so I can monitor logs on Squid,
> do bandwidth tests on my customers servers, etc.
>
> I let the server sit running over Thursday, Friday and Saturday
> morning last week, came in to do some work on it Sat evening and the
> wireless NIC would NOT come up. It's set to connect automatically and
> system connection in Network Manager. Even restarting the Network
> service failed to bring it up. So, after some digging I noticed this
> in dmesg:
>
> [25013.930030] phy0 -> rt2500pci_set_device_state: Error - Device
> failed to enter state 1 (-16).
> [25013.930036] phy0 -> rt2500pci_set_device_state: Error - Device
> failed to enter state 1 (-16).
> [25016.435030] ieee80211 phy0: wlan0: No probe response from AP
> 0c:d5:02:7e:98:1f after 500ms, disconnecting.
> [25016.441120] cfg80211: Calling CRDA to update world regulatory domain
> [25016.447192] cfg80211: World regulatory domain updated:
> [25016.447196] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [25016.447199] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
> (300 mBi, 2000 mBm)
>
> [25016.447230] cfg80211: Calling CRDA for country: US
> [25016.450200] cfg80211: Regulatory domain changed to country: US
> [25016.450203] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [25016.450205] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
> [25017.234399] wlan0: authenticate with 0c:d5:02:7e:98:1f
> [25017.239521] wlan0: send auth to 0c:d5:02:7e:98:1f (try 1/3)
> [25017.440026] wlan0: send auth to 0c:d5:02:7e:98:1f (try 2/3)
> [25017.641026] wlan0: send auth to 0c:d5:02:7e:98:1f (try 3/3)
> [25017.842021] wlan0: authentication with 0c:d5:02:7e:98:1f timed out
> [25030.128035] phy0 -> rt2x00queue_write_tx_frame: Error - Dropping
> frame due to full tx queue 0.
> [25035.811027] phy0 -> rt2x00queue_write_tx_frame: Error - Dropping
> frame due to full tx queue 0.
> [25041.499026] phy0 -> rt2x00queue_write_tx_frame: Error - Dropping
> frame due to full tx queue 0.
> [25047.184028] phy0 -> rt2x00queue_write_tx_frame: Error - Dropping
> frame due to full tx queue 0.
>
> I've never seen this error before on any of my systems. I run F17 on
> my netbook and have let it sit for days running without this problem.
>
> Couple of things to note, I live way out in the boonies, so there is
> no security on the wireless router I connect to. I've rebooted the
> router just to make sure it wasn't the problem. The card came up
> after a reboot, but this is bothersome if I can't rely on the link to
> be up all the time.
>
> I'll be glad to offer any more information that may be necessary.
>
> Any ideas?
>
Mateusz Marzantowicz
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
I must apologise to my political science colleagues if any other's exist who use Fedora, let alone other versions of Linux. It is not my intent to poke fun at social sciences, only at myself.
-- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
