This one might be a lot harder. I installed (fresh) F17 on my new
6-core Phenom II system. I normally will keep that server on and
accessible via ssh from the internet so I can monitor logs on Squid, do
bandwidth tests on my customers servers, etc.
I let the server sit running over Thursday, Friday and Saturday morning
last week, came in to do some work on it Sat evening and the wireless
NIC would NOT come up. It's set to connect automatically and system
connection in Network Manager. Even restarting the Network service
failed to bring it up. So, after some digging I noticed this in dmesg:
[25013.930030] phy0 -> rt2500pci_set_device_state: Error - Device failed
to enter state 1 (-16).
[25013.930036] phy0 -> rt2500pci_set_device_state: Error - Device failed
to enter state 1 (-16).
[25016.435030] ieee80211 phy0: wlan0: No probe response from AP
0c:d5:02:7e:98:1f after 500ms, disconnecting.
[25016.441120] cfg80211: Calling CRDA to update world regulatory domain
[25016.447192] cfg80211: World regulatory domain updated:
[25016.447196] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[25016.447199] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[25016.447230] cfg80211: Calling CRDA for country: US
[25016.450200] cfg80211: Regulatory domain changed to country: US
[25016.450203] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[25016.450205] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
[25017.234399] wlan0: authenticate with 0c:d5:02:7e:98:1f
[25017.239521] wlan0: send auth to 0c:d5:02:7e:98:1f (try 1/3)
[25017.440026] wlan0: send auth to 0c:d5:02:7e:98:1f (try 2/3)
[25017.641026] wlan0: send auth to 0c:d5:02:7e:98:1f (try 3/3)
[25017.842021] wlan0: authentication with 0c:d5:02:7e:98:1f timed out
[25030.128035] phy0 -> rt2x00queue_write_tx_frame: Error - Dropping
frame due to full tx queue 0.
[25035.811027] phy0 -> rt2x00queue_write_tx_frame: Error - Dropping
frame due to full tx queue 0.
[25041.499026] phy0 -> rt2x00queue_write_tx_frame: Error - Dropping
frame due to full tx queue 0.
[25047.184028] phy0 -> rt2x00queue_write_tx_frame: Error - Dropping
frame due to full tx queue 0.
I've never seen this error before on any of my systems. I run F17 on my
netbook and have let it sit for days running without this problem.
Couple of things to note, I live way out in the boonies, so there is no
security on the wireless router I connect to. I've rebooted the router
just to make sure it wasn't the problem. The card came up after a
reboot, but this is bothersome if I can't rely on the link to be up all
the time.
I'll be glad to offer any more information that may be necessary.
Any ideas?
--
Mark Haney
Software Developer/Consultant
AB Emblem
markh@xxxxxxxxxxxx
Linux marius.homelinux 3.4.4-4.fc16.x86_64 GNU/Linux
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
