Re: X server in F14 horribly slow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/30/2011 10:39 AM, Kevin J. Cummings wrote:
> On 03/30/2011 01:15 PM, JD wrote:
>>> I suspect you have something mis-configured, but I have no clue as to
>>> what right now.
>> But I did not change any configuration between fc13 and fc14.
> Nor did I, but I had *lot's* of problems initially with my working
> F12/F13 configuration after I switched to F14.  Mostly due to changes in
> the ati driver.
>
> 1)  I used to have to turn off KMS in order for suspend to work right.
>
> 	With F14, I had to not disable it in order to prevent a whole list of
> video problems, including text consoles being corrupt, X hanging
> completely when it started using the ati driver (I had to use vesa to
> even boot up using UMS).  I was finally convinced that by enabling KMS,
> things would start working again, and they did, but there was nothing in
> the upgrade that suggested doing so was the right thing to do.

What is KMS and how do I enable it?

> 2)  I had all sorts of problems with the xorg configuration file.  I had
> a *very* complicated one because I had changed it continually since FC6.
>   Once I removed most of it, things vastly improved.  Its probably a good
> idea anyways since the advent of the /etc/x11/conf.d stuff.  YMMV

/etc/X11/xorg.conf.d only contains  00-system-setup-keyboard.conf

(/etc/X11/xorg.conf),  I do not see KMS in there at all. How would I 
enable it?

> So, it might me a good idea to list any anomalies with your
> configuration, from kernel boot parameters, to xorg.conf stuff so that
> we can see if you are doing anything that might now be considered
> problematic.  Also, if you could re-state what your ATI hardware is,
> that could be helpful as well.  Is this a desktop or laptop?
>
 From lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility 
Radeon 9600 M10]

 From /boot/grub/grub.conf:

title Fedora (2.6.35.6-45.fc14.i686)
         root (hd0,1)
         kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro 
root=UUID=99c4a1b1-99c2-40e6-8d2c-44bba67ad7df nomodeset 
SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
         initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img

And finally /etc/X11/xorg.conf
# ls -l /etc/X11/xorg.conf
-rw-r--r--. 1 skroot root 4978 Mar 27 18:07 /etc/X11/xorg.conf

As you can see from the date, it was touched during the upgrade to fc14.

# cat /etc/X11/xorg.conf
Section "ServerLayout"
     Identifier     "X.org Configured"
     Screen      0  "Screen0" 0 0
     InputDevice    "Mouse0" "CorePointer"
     InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
     ModulePath   "/usr/lib/xorg/modules"
     FontPath     "catalogue:/etc/X11/fontpath.d"
     FontPath     "built-ins"
EndSection

Section "Module"
     Load  "record"
     Load  "extmod"
     Load  "dri2"
     Load  "dbe"
     Load  "glx"
     Load  "dri"
EndSection

Section "InputDevice"
     Identifier    "Keyboard0"
     Driver        "kbd"
     Option "Protocol" "Standard"
     Option "XkbLayout" "us"
     Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
     Identifier  "Mouse0"
     Driver      "mouse"
     Option        "Protocol" "auto"
     Option        "Device" "/dev/input/mice"
     Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
     Identifier   "Monitor0"
     VendorName   "Monitor Vendor"
     ModelName    "Monitor Model"
     HorizSync    24.0 - 85.0
     VertRefresh  48.0 - 76.0
EndSection

Section "Device"
         ### Available Driver options are:-
         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
         ### [arg]: arg optional
         #Option     "NoAccel"                # [<bool>]
         #Option     "SWcursor"               # [<bool>]
         #Option     "Dac6Bit"                # [<bool>]
         #Option     "Dac8Bit"                # [<bool>]
         #Option     "BusType"                # [<str>]
         #Option     "CPPIOMode"              # [<bool>]
         #Option     "CPusecTimeout"          # <i>
         #Option     "AGPMode"                # <i>
         #Option     "AGPFastWrite"           # [<bool>]
         #Option     "AGPSize"                # <i>
         #Option     "GARTSize"               # <i>
         #Option     "RingSize"               # <i>
         #Option     "BufferSize"             # <i>
         #Option     "EnableDepthMoves"       # [<bool>]
         #Option     "EnablePageFlip"         # [<bool>]
         #Option     "NoBackBuffer"           # [<bool>]
         #Option     "DMAForXv"               # [<bool>]
         #Option     "FBTexPercent"           # <i>
         #Option     "DepthBits"              # <i>
         #Option     "PCIAPERSize"            # <i>
         #Option     "AccelDFS"               # [<bool>]
         #Option     "IgnoreEDID"             # [<bool>]
         #Option     "CustomEDID"             # [<str>]
         #Option     "DisplayPriority"        # [<str>]
         #Option     "PanelSize"              # [<str>]
         #Option     "ForceMinDotClock"       # <freq>
         #Option     "ColorTiling"            # [<bool>]
         #Option     "VideoKey"               # <i>
         #Option     "RageTheatreCrystal"     # <i>
         #Option     "RageTheatreTunerPort"     # <i>
         #Option     "RageTheatreCompositePort"     # <i>
         #Option     "RageTheatreSVideoPort"     # <i>
         #Option     "TunerType"              # <i>
         #Option     "RageTheatreMicrocPath"     # <str>
         #Option     "RageTheatreMicrocType"     # <str>
         #Option     "ScalerWidth"            # <i>
         #Option     "RenderAccel"            # [<bool>]
         #Option     "SubPixelOrder"          # [<str>]
         #Option     "ShowCache"              # [<bool>]
         #Option     "ClockGating"            # [<bool>]
         #Option     "VGAAccess"              # [<bool>]
         #Option     "ReverseDDC"             # [<bool>]
         #Option     "LVDSProbePLL"           # [<bool>]
         #Option     "AccelMethod"            # <str>
         #Option     "DRI"                    # [<bool>]
         #Option     "ConnectorTable"         # <str>
         #Option     "DefaultConnectorTable"     # [<bool>]
         #Option     "DefaultTMDSPLL"         # [<bool>]
         #Option     "TVDACLoadDetect"        # [<bool>]
         #Option     "ForceTVOut"             # [<bool>]
         #Option     "TVStandard"             # <str>
         #Option     "IgnoreLidStatus"        # [<bool>]
         #Option     "DefaultTVDACAdj"        # [<bool>]
         #Option     "Int10"                  # [<bool>]
         #Option     "EXAVSync"               # [<bool>]
         #Option     "ATOMTVOut"              # [<bool>]
         #Option     "R4xxATOM"               # [<bool>]
         #Option     "ForceLowPowerMode"      # [<bool>]
         #Option     "DynamicPM"              # [<bool>]
         #Option     "NewPLL"                 # [<bool>]
         #Option     "ZaphodHeads"            # <str>
     Identifier  "Card0"
     Driver      "radeon"
     VendorName  "ATI Technologies Inc"
     BoardName   "RV350 [Mobility Radeon 9600 M10]"
     BusID       "PCI:1:0:0"
EndSection

Section "Screen"
     Identifier "Screen0"
     Device     "Card0"
     Monitor    "Monitor0"
     SubSection "Display"
         Viewport   0 0
         Depth     1
     EndSubSection
     SubSection "Display"
         Viewport   0 0
         Depth     4
     EndSubSection
     SubSection "Display"
         Viewport   0 0
         Depth     8
     EndSubSection
     SubSection "Display"
         Viewport   0 0
         Depth     15
     EndSubSection
     SubSection "Display"
         Viewport   0 0
         Depth     16
     EndSubSection
     SubSection "Display"
         Viewport   0 0
         Depth     24
     EndSubSection
EndSection


-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines

[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [EPEL Devel]     [Fedora Magazine]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Desktop]     [Fedora Fonts]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Fedora Sparc]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux