On 02/09/2010 03:16 PM, reg@xxxxxxx wrote: > There are at least two threads active talking about F12 X11 woes. > > I dont want to hijack either, but Im having similar problems, so I > will start a third thread, and hope the readers of the other two > will jump in. > > With F11 everything is fine, with F12 I only get 800x600 resolution. > I have various Nvidia cards (NV43 - GeForce 6600, NV44 GeForce 6200LE), > various Intel CPUs (Pentium4, Intel Core 2), so the only common variable > is the nvidia drivers nv / nouveau. The machines are connected to the > Samsung 930B Flat Screen Monitor thru a ConnectGear KVM . > > Thru the F11 machine I see > > --- > > [root@deneb reg]# xrandr > Screen 0: minimum 320 x 240, current 1280 x 1024, maximum 1280 x 1024 > default connected 1280x1024+0+0 0mm x 0mm > 1280x1024 60.0* > 1024x768 60.0 > 800x600 60.0 > 640x480 60.0 > 1280x960 60.0 > 700x525 60.0 > 640x512 60.0 > 512x384 60.0 > 400x300 60.0 > 320x240 60.0 > > --- > > Thru the F12 machine I see: > > --- > > [root@mythtv-fe proc]# xrandr > Screen 0: minimum 320 x 200, current 800 x 600, maximum 4096 x 4096 > VGA-0 connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x > 0mm > 800x600 60.3* 56.2 > 640x480 59.9 > DVI-I-0 disconnected (normal left inverted right x axis y axis) > > --- > > My xorg.conf reads: > [root@mythtv-fe X11]# more xorg.conf > > Section "ServerLayout" > Identifier "Default Layout" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > > FontPath "unix/:7100" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "fbdevhw" > Load "glx" > Load "record" > Load "freetype" > Load "type1" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "yes" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "Samsung" > ModelName "SyncMaster 930B" > # Resolution is 1280x1024 @ 60 or 75Hz. > # Max Pixel Clock is 140MHz. > HorizSync 30.0 - 81.0 > VertRefresh 56.0 - 75.0 > DisplaySize 376 301 > Option "dpms" > EndSection > > Section "Device" > Identifier "Videocard0" > # Driver "nv" > Driver "nouveau" > VendorName "Videocard vendor" > BoardName "NVIDIA GeForce 6600" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Videocard0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1280x1024" "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > --- > > I have no idea what to try next. > I am telling the driver what the range of HorizSync/VertReresh rates is, > so I dont see why its not believing me. > > and I have no idea what to make of the xrandr output from the F12 machine. > > Comments? > > Reg.Clemens > reg@xxxxxxx > > > Do a lsmod and see what driver module is loading , nv or Nvidia ? And the you will have to do a edit on your /boot/grub/menu.lst and after: example; kernel /boot/vmlinuz-2.6.31.9-174.fc12.x86_64 ro root=UUID=db7da871-8b5c-4ad9-8e9b-d7801cb4b492 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet nv.modeset=0 vga=318 and at the end where you see rhgb quiet put the nv,modeset=0 vga=? the resolution you want to set from chart below, as you noticed I set mine vga-318 or 1024x768 1600x1200 - 346 1280x1024 - 31B 1400x1050 - 348 1024x768 - 318 800x600 - 315 -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
