On 25/08/09 02:54, stan wrote: > On Tue, 25 Aug 2009 00:58:32 +0200 > "Erik P. Olsen" <epodata@xxxxxxxxx> wrote: > >> I appreciate all the help you've given me but I haven't seen the >> light yet. >> > > I gave you some bad information in my original post. I thought it was > the manager that allowed me to turn devices off in pulseaudio. It was > the PulseAudio Volume Control. > > Applications -> Sound and Video -> PulseAudio Volume Control > > First select the Output Devices tab and make sure the drop down in the > lower right corner is set to All output devices. > Then select the Configuration tab. If you right click on the device you > want Pulse to ignore, at the bottom of the menu is an off selection. > Pulse won't know about that device if you turn it off. If you want to > have pulse replace the default device in alsa you can do some scripting > in .asoundrc to make it happen (I won't go into it here), or you can > make sure that the device you want pulse to ignore is device 1. The > default device in alsa is always device 0 unless you script it > differently. In this case, pulse will use device 0 to play and you can > play using alsa with device 1. > > But it sounds like you have another problem. That all your sound > devices aren't being recognized. Run the script at the link below. It > will put a text file in /tmp/alsa-info.txt with information about your > system. If the card you want isn't in that file that means it is not > recognized by alsa and you will not be able to use it. If it is a plug > in card, remove it and plug it back in just before you run the script. > > http://git.alsa-project.org/?p=alsa-driver.git;a=blob_plain;f=utils/alsa-info.sh > I've run the script and it shows both sound cards. I think the output is too large for the mailing list so I have sent it directly to you (Stan). I hope you don't mind. Thanks for your help. -- Erik. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines