Re: Novatel MC950D 3G-device in fedora 11

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Donnerstag, den 23.07.2009, 22:33 +0200 schrieb Joerg Bergmann:
> 
> Am 23.07.2009 21:58, schrieb Joerg Bergmann:
> >
> >
> > Am 23.07.2009 21:27, schrieb Antonio Olivares:
> >>
> >>
> >> --- On Thu, 7/23/09, Joerg Bergmann<email@xxxxxxxxxxxx> wrote:
> >>
> >>> From: Joerg Bergmann<email@xxxxxxxxxxxx>
> >>> Subject: Re: Novatel MC950D 3G-device in fedora 11
> >>> To: "Community assistance, encouragement, and advice for using
> >>> Fedora."<fedora-list@xxxxxxxxxx>
> >>> Date: Thursday, July 23, 2009, 12:07 PM
> >>>
> >>>
> >>> Am 23.07.2009 20:30, schrieb Julian Aloofi:
> >>>> Am Donnerstag, den 23.07.2009, 20:16 +0200 schrieb
> >>> Joerg Bergmann:
> >>>>> I try to get running a novatel MC950D 3G device
> >>> in
> >>>>> fedora 11. lsusb shows vedor/device as 1410:5010.
> >>>>> Any hints?
> >>>>>
> >>>>> Thank you! Joerg Bergmann
> >>>>>
> >>>> According to this web page, the driver is included in
> >>> the kernel:
> >>>> http://www.ubuntudoctor.com/content/blog/3g-modem-installation-on-ubuntu-linux
> >>>>
> >>>>
> >>>> If this is true, you can just start
> >>>>
> >>> system-config-network(System->Administration->Network)
> >>> and start setting
> >>>> up a modem connection.
> >>>> If it gets recognized as a USB stick first, try the
> >>> following:
> >>>> su -c 'modprobe -r usbserial'
> >>>> su -c 'umount /media/Movistar/'
> >>>> sudo -c 'modprobe usbserial vendor=0x1410
> >>> product=0x5010'
> >>> There won't be recognized a USB stick, but there is no
> >>> /dev/ttyUSBx as well. modprobe -r usbserial reports
> >>> FATAL: usbserial in use. And, additional:
> >>> WARNING: Deprecated config file /etc/modprobe.conf, all
> >>> config files belong into /etc/modprobe.d/
> >>> And, on the creation of modem connection, no modem will
> >>> be found.
> >>>
> >>> --
> >>
> >> If you don't mind try the following (hoping wvdial was installed on
> >> your machine)
> >>
> >> $ su -
> >> passwd:
> >> # wvdialconf /etc/wvdial.conf
> >>
> >> it will scan modem ports and hopefully it might find one like
> >> /dev/ttyUSB0 ... /dev/ttyUSB3, or something like /dev/ttyACM0 ...
> >> /dev/ttyACM3, ..., etc
> >>
> >> Otherwise,
> >>
> >> unplug the device and please do the following
> >>
> >> $ dmesg and/or (as root su -) # tail -f /var/log/messages
> >>
> >> when the device is plugged back in.
> >>
> > Did not found a modem, here is the tail of /var/log/messages:
> >
> > Jul 23 21:51:50 T40 kernel: usb 3-2: new full speed USB device using
> > uhci_hcd and address 3
> > Jul 23 21:51:50 T40 kernel: usb 3-2: New USB device found,
> > idVendor=1410, idProduct=5010
> > Jul 23 21:51:50 T40 kernel: usb 3-2: New USB device strings: Mfr=1,
> > Product=2, SerialNumber=4
> > Jul 23 21:51:50 T40 kernel: usb 3-2: Product: Novatel Wireless HSUPA Modem
> > Jul 23 21:51:50 T40 kernel: usb 3-2: Manufacturer: Novatel Wireless
> > Jul 23 21:51:50 T40 kernel: usb 3-2: SerialNumber: 356846013538400
> > Jul 23 21:51:50 T40 kernel: usb 3-2: configuration #1 chosen from 1 choice
> > Jul 23 21:51:50 T40 kernel: scsi3 : SCSI emulation for USB Mass Storage
> > devices
> > Jul 23 21:51:55 T40 kernel: scsi 3:0:0:0: CD-ROM Novatel Mass Storage
> > 1.00 PQ: 0 ANSI: 2
> > Jul 23 21:51:55 T40 kernel: sr1: scsi-1 drive
> > Jul 23 21:51:55 T40 kernel: sr 3:0:0:0: Attached scsi generic sg2 type 5
> > Jul 23 21:51:59 T40 kernel: sr1: CDROM (ioctl) error, command: Get
> > configuration 46 00 00 00 00 00 00 00 20 00
> > Jul 23 21:51:59 T40 kernel: sr: Sense Key : No Sense [current]
> > Jul 23 21:51:59 T40 kernel: sr: Add. Sense: No additional sense information
> >
> After having installing usb_modeswitch, there are some changes,
> but still no success:
> 
> Jul 23 22:21:54 T40 pulseaudio[2263]: pid.c: Daemon already running.
> Jul 23 22:22:34 T40 kernel: usb 3-2: new full speed USB device using 
> uhci_hcd and address 2
> Jul 23 22:22:34 T40 kernel: usb 3-2: New USB device found, 
> idVendor=1410, idProduct=5010
> Jul 23 22:22:34 T40 kernel: usb 3-2: New USB device strings: Mfr=1, 
> Product=2, SerialNumber=4
> Jul 23 22:22:34 T40 kernel: usb 3-2: Product: Novatel Wireless HSUPA Modem
> Jul 23 22:22:34 T40 kernel: usb 3-2: Manufacturer: Novatel Wireless
> Jul 23 22:22:34 T40 kernel: usb 3-2: SerialNumber: 356846013538400
> Jul 23 22:22:34 T40 kernel: usb 3-2: configuration #1 chosen from 1 choice
> Jul 23 22:22:34 T40 kernel: Initializing USB Mass Storage driver...
> Jul 23 22:22:34 T40 kernel: scsi2 : SCSI emulation for USB Mass Storage 
> devices
> Jul 23 22:22:34 T40 kernel: usbcore: registered new interface driver 
> usb-storage
> Jul 23 22:22:34 T40 kernel: USB Mass Storage support registered.
> Jul 23 22:22:34 T40 kernel: usbcore: registered new interface driver 
> usbserial
> Jul 23 22:22:34 T40 kernel: USB Serial support registered for generic
> Jul 23 22:22:34 T40 kernel: usbcore: registered new interface driver 
> usbserial_generic
> Jul 23 22:22:34 T40 kernel: usbserial: USB Serial Driver core
> Jul 23 22:22:34 T40 kernel: USB Serial support registered for GSM modem 
> (1-port)
> Jul 23 22:22:34 T40 kernel: usbcore: registered new interface driver option
> Jul 23 22:22:34 T40 kernel: option: v0.7.2:USB Driver for GSM modems
> Jul 23 22:22:39 T40 kernel: scsi 2:0:0:0: CD-ROM            Novatel 
> Mass Storage     1.00 PQ: 0 ANSI: 2
> Jul 23 22:22:39 T40 kernel: sr1: scsi-1 drive
> Jul 23 22:22:39 T40 kernel: sr 2:0:0:0: Attached scsi generic sg2 type 5
> Jul 23 22:22:43 T40 kernel: sr1: CDROM (ioctl) error, command: Get 
> configuration 46 00 00 00 00 00 00 00 20 00
> Jul 23 22:22:43 T40 kernel: sr: Sense Key : No Sense [current]
> Jul 23 22:22:43 T40 kernel: sr: Add. Sense: No additional sense information
> Jul 23 22:24:43 T40 kernel: warning: process `/usr/sbin/syste' used the 
> deprecated sysctl system call with 1.23.
> Jul 23 22:26:36 T40 kernel: warning: process `/usr/sbin/syste' used the 
> deprecated sysctl system call with 1.23.

This looks pretty good. But somehow it still tries to fall back to the
CDROM mode.
Try to create a new udev rule (as root) /etc/udev/rules.d/55-umts.rules
that contains the following:

SUBSYSTEM=="usb"
SYSFS{idProduct}=="5010"
SYSFS{idVendor}=="1410", RUN+="usb_modeswitch -v 1410p 5010  -d -H1"

Then reboot and hope
Try to establish the connection with NetworkManager (right click on
NetworkManager applet->Edit Connections...)

Attachment: signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux