On Wed, Oct 15, 2008 at 9:40 PM, Kevin Gilbert <kevin952@xxxxxxxxxx> wrote: > I'm trying to get MythTV going and I'm having a problem configuring X to > correctly set the resolution on the TV. (I am getting output on the TV but > it's in 4:3 not 16:9 ratio.) > > I cannot see what I am doing wrong! Can someone please give me a hint? > > Distro if Fedora Rawhide (pre-10 "bleeding edge"). X version info (some of): > > ==== start ==== > $ grep xorg-x11-server /var/log/rpmpkgs > xorg-x11-server-common-1.5.1-10.fc10.x86_64.rpm > xorg-x11-server-utils-7.4-3.fc10.x86_64.rpm > xorg-x11-server-Xorg-1.5.1-10.fc10.x86_64.rpm > ==== end ==== > > My xorg.conf is: > ==== start ==== > Section "ServerLayout" > Identifier "Multi-Head" > Screen 0 "Desktop" 0 0 > Screen 1 "MythTV" RightOf "Desktop" > InputDevice "Keyboard" "CoreKeyboard" > InputDevice "Mouse" "CorePointer" > EndSection > > Section "Files" > ModulePath "/usr/lib64/xorg/modules/extensions" > ModulePath "/usr/lib64/xorg/modules" > FontPath "/usr/share/fonts/default/Type1" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "fbdevhw" > Load "freetype" > Load "glx" > EndSection > > Section "ServerFlags" > Option "Xinerama" "0" > EndSection > > Section "InputDevice" > Identifier "Mouse" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/input/mice" > Option "Emulate3Buttons" "no" > Option "ZAxisMapping" "4 5" > EndSection > > Section "InputDevice" > Identifier "Keyboard" > Driver "kbd" > Option "XkbLayout" "us" > Option "XkbModel" "pc105" > EndSection > > Section "Device" > Identifier "GF9600_GSO_Samsung" > Driver "nvidia" > VendorName "NVIDIA Corporation" > BusID "PCI:1:0:0" > Option "UseEvents" "True" > Screen 0 > EndSection > > Section "Device" > Identifier "GF9600_GSO_TV" > Driver "nvidia" > VendorName "NVIDIA Corporation" > BusID "PCI:1:0:0" > Option "UseEvents" "True" > Screen 1 > EndSection > > Section "Monitor" > Identifier "Samsung" > VendorName "Samsung" > ModelName "SyncMaster 940BW" > HorizSync 30.0 - 81.0 > VertRefresh 56.0 - 75.0 > Option "DPMS" > EndSection > > Section "Monitor" > Identifier "LG_TV" > VendorName "LG" > ModelName "LG42LB2DE" > Modeline "1920x1080" 176.92 1920 2008 2224 2632 1080 1080 1083 1120 > Modeline "1080" 182.01 1920 1952 2640 2672 1080 1102 1113 1135 > Modeline "1080i" 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync > EndSection > > Section "Screen" > Identifier "Desktop" > Device "GF9600_GSO_Samsung" > Monitor "Samsung" > DefaultDepth 24 > SubSection "Display" > Depth 24 > EndSubSection > EndSection > > Section "Screen" > Identifier "MythTV" > Device "GF9600_GSO_TV" > Monitor "LG_TV" > ==== end ==== > > The Xorg.0.log file is, in part: > ==== start ==== > (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1 > (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GSO (G92) at PCI:1:0:0 (GPU-0) > (--) NVIDIA(0): Memory: 393216 kBytes > (--) NVIDIA(0): VideoBIOS: 62.92.23.00.10 > (II) NVIDIA(0): Detected PCI Express Link width: 16X > (--) NVIDIA(0): Interlaced video modes are supported on this GPU > (--) NVIDIA(0): Connected display device(s) on GeForce 9600 GSO at PCI:1:0:0: > (--) NVIDIA(0): Samsung SyncMaster (CRT-0) > (--) NVIDIA(0): CRT-1 > (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock > (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock > (II) NVIDIA(0): Assigned Display Device: CRT-0 > (==) NVIDIA(0): > (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto- > select" > (==) NVIDIA(0): will be used as the requested mode. > (==) NVIDIA(0): > (II) NVIDIA(0): Validated modes: > (II) NVIDIA(0): "nvidia-auto-select" > (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900 > (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config > (--) NVIDIA(0): option > (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. > (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32 > (==) NVIDIA(1): RGB weight 888 > (==) NVIDIA(1): Default visual is TrueColor > (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0) > (**) NVIDIA(1): Option "UseEvents" "True" > (**) NVIDIA(1): Enabling RENDER acceleration > (II) NVIDIA(1): NVIDIA GPU GeForce 9600 GSO (G92) at PCI:1:0:0 (GPU-0) > (--) NVIDIA(1): Memory: 393216 kBytes > (--) NVIDIA(1): VideoBIOS: 62.92.23.00.10 > (II) NVIDIA(1): Detected PCI Express Link width: 16X > (--) NVIDIA(1): Interlaced video modes are supported on this GPU > (--) NVIDIA(1): Connected display device(s) on GeForce 9600 GSO at PCI:1:0:0: > (--) NVIDIA(1): Samsung SyncMaster (CRT-0) > (--) NVIDIA(1): CRT-1 > (--) NVIDIA(1): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock > (--) NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock > (II) NVIDIA(1): Assigned Display Device: CRT-1 > (WW) NVIDIA(1): No valid modes for "1080"; removing. > (WW) NVIDIA(1): No valid modes for "1080i"; removing. > (WW) NVIDIA(1): No valid modes for "1920x1080"; removing. > (WW) NVIDIA(1): > (WW) NVIDIA(1): Unable to validate any modes; falling back to the default > mode > (WW) NVIDIA(1): "nvidia-auto-select". > (WW) NVIDIA(1): > (II) NVIDIA(1): Validated modes: > (II) NVIDIA(1): "nvidia-auto-select" > (II) NVIDIA(1): Virtual screen size determined to be 640 x 480 > (WW) NVIDIA(1): Unable to get display device CRT-1's EDID; cannot compute DPI > (WW) NVIDIA(1): from CRT-1's EDID. > (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default > (==) NVIDIA(1): Enabling 32-bit ARGB GLX visuals. > (--) Depth 24 pixmap format is 32 bpp > ==== end ==== > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines > Hi Kevin! The following link may help: http://www.mythtvtalk.com/forum/viewtopic.php?t=2842&postdays=0&postorder=asc&start=0 And this one seems to have considerable detail: http://gentoo-wiki.com/HOWTO_Setup_X_for_MythTV Have a lot of fun! Tod -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
