I'm trying to get MythTV going and I'm having a problem configuring X to correctly set the resolution on the TV. (I am getting output on the TV but it's in 4:3 not 16:9 ratio.) I cannot see what I am doing wrong! Can someone please give me a hint? Distro if Fedora Rawhide (pre-10 "bleeding edge"). X version info (some of): ==== start ==== $ grep xorg-x11-server /var/log/rpmpkgs xorg-x11-server-common-1.5.1-10.fc10.x86_64.rpm xorg-x11-server-utils-7.4-3.fc10.x86_64.rpm xorg-x11-server-Xorg-1.5.1-10.fc10.x86_64.rpm ==== end ==== My xorg.conf is: ==== start ==== Section "ServerLayout" Identifier "Multi-Head" Screen 0 "Desktop" 0 0 Screen 1 "MythTV" RightOf "Desktop" InputDevice "Keyboard" "CoreKeyboard" InputDevice "Mouse" "CorePointer" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules/extensions" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/default/Type1" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "freetype" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Device" Identifier "GF9600_GSO_Samsung" Driver "nvidia" VendorName "NVIDIA Corporation" BusID "PCI:1:0:0" Option "UseEvents" "True" Screen 0 EndSection Section "Device" Identifier "GF9600_GSO_TV" Driver "nvidia" VendorName "NVIDIA Corporation" BusID "PCI:1:0:0" Option "UseEvents" "True" Screen 1 EndSection Section "Monitor" Identifier "Samsung" VendorName "Samsung" ModelName "SyncMaster 940BW" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "LG_TV" VendorName "LG" ModelName "LG42LB2DE" Modeline "1920x1080" 176.92 1920 2008 2224 2632 1080 1080 1083 1120 Modeline "1080" 182.01 1920 1952 2640 2672 1080 1102 1113 1135 Modeline "1080i" 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync EndSection Section "Screen" Identifier "Desktop" Device "GF9600_GSO_Samsung" Monitor "Samsung" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "MythTV" Device "GF9600_GSO_TV" Monitor "LG_TV" ==== end ==== The Xorg.0.log file is, in part: ==== start ==== (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1 (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GSO (G92) at PCI:1:0:0 (GPU-0) (--) NVIDIA(0): Memory: 393216 kBytes (--) NVIDIA(0): VideoBIOS: 62.92.23.00.10 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce 9600 GSO at PCI:1:0:0: (--) NVIDIA(0): Samsung SyncMaster (CRT-0) (--) NVIDIA(0): CRT-1 (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock (II) NVIDIA(0): Assigned Display Device: CRT-0 (==) NVIDIA(0): (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto- select" (==) NVIDIA(0): will be used as the requested mode. (==) NVIDIA(0): (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select" (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900 (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(1): RGB weight 888 (==) NVIDIA(1): Default visual is TrueColor (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(1): Option "UseEvents" "True" (**) NVIDIA(1): Enabling RENDER acceleration (II) NVIDIA(1): NVIDIA GPU GeForce 9600 GSO (G92) at PCI:1:0:0 (GPU-0) (--) NVIDIA(1): Memory: 393216 kBytes (--) NVIDIA(1): VideoBIOS: 62.92.23.00.10 (II) NVIDIA(1): Detected PCI Express Link width: 16X (--) NVIDIA(1): Interlaced video modes are supported on this GPU (--) NVIDIA(1): Connected display device(s) on GeForce 9600 GSO at PCI:1:0:0: (--) NVIDIA(1): Samsung SyncMaster (CRT-0) (--) NVIDIA(1): CRT-1 (--) NVIDIA(1): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock (II) NVIDIA(1): Assigned Display Device: CRT-1 (WW) NVIDIA(1): No valid modes for "1080"; removing. (WW) NVIDIA(1): No valid modes for "1080i"; removing. (WW) NVIDIA(1): No valid modes for "1920x1080"; removing. (WW) NVIDIA(1): (WW) NVIDIA(1): Unable to validate any modes; falling back to the default mode (WW) NVIDIA(1): "nvidia-auto-select". (WW) NVIDIA(1): (II) NVIDIA(1): Validated modes: (II) NVIDIA(1): "nvidia-auto-select" (II) NVIDIA(1): Virtual screen size determined to be 640 x 480 (WW) NVIDIA(1): Unable to get display device CRT-1's EDID; cannot compute DPI (WW) NVIDIA(1): from CRT-1's EDID. (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default (==) NVIDIA(1): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp ==== end ==== -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
