On Thu, Jul 24, 2008 at 9:59 AM, Zvi Kave <tzvik@xxxxxxxxxx> wrote: > I can not access the required IP behind the MS server. > Seems that the VPN PPTP connection to MS PPTP server is OK as from the > /var/log/messages, but I can not access the required IP behind the MS > server. > (But from Windows XP , I have no problems to connect to desired IP) > > Here are the details: > > 1. Before starting my netstat -r > > (1.1.1.0 is my local network) > > Destination Gateway Genmask Flags MSS > Window irtt Iface > 1.1.1.0 0.0.0.0 255.255.255.0 U 0 > 0 0 eth0 > 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 > 0 virbr0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 > 0 0 eth0 > 0.0.0.0 1.1.1.254 0.0.0.0 UG 0 > 0 0 eth0 > > After command: pppd call vpn1 > I got the following messages in /var/log/messages > > Jul 22 14:21:14 razleefs pppd[2898]: pppd 2.4.4 started by root, uid 0 > Jul 22 14:21:14 razleefs pppd[2898]: Using interface ppp0 > Jul 22 14:21:14 razleefs pppd[2898]: Connect: ppp0 <--> /dev/pts/3 > Jul 22 14:21:20 razleefs pptp[2900]: anon log[main:pptp.c:276]: The synchro > pptp option is NOT activated > Jul 22 14:21:22 razleefs pptp[2917]: anon warn[ctrlp_disp:pptp_ctrl.c:955]: > zero Async Control Character Maps are not supported! > > Jul 22 14:21:22 razleefs pppd[2898]: CHAP authentication succeeded > Jul 22 14:21:22 razleefs kernel: PPP MPPE Compression module registered > Jul 22 14:21:22 razleefs pppd[2898]: MPPE 128-bit stateless compression ena > Jul 22 14:21:23 razleefs pppd[2898]: local IP address 192.168.10.14 > Jul 22 14:21:23 razleefs pppd[2898]: remote IP address 192.168.10.12 > Jul 22 14:21:23 razleefs pppd[2898]: primary DNS address 192.168.10.1 > Jul 22 14:21:23 razleefs pppd[2898]: secondary DNS address 192.168.0.5 > > I understand that it means that connection is ready. > > netstat -r is now: > > Destination Gateway Genmask Flags MSS > Window irtt Iface > 192.168.10.12 0.0.0.0 255.255.255.255 UH 0 0 > 0 ppp0 > 1.1.1.0 0.0.0.0 255.255.255.0 U 0 > 0 0 eth0 > 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 > 0 virbr0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 > 0 0 eth0 > 0.0.0.0 1.1.1.254 0.0.0.0 UG 0 > 0 0 eth0 > > I need now to get connection to IP 172.25.9.64 behind the Windows VPN > server. > I understand that I can not do it without some route commands. > > I tried the suggested commands in vain: > route add -net 192.168.10.0 netmask 255.255.255.0 dev ppp0 > route add -net 172.25.9.0 netmask 255.255.255.0 dev ppp0 > > Now I tried ping 172.25.9.64 but it hanged up, > and I got the message: > ping 172.25.9.64 > PING 172.25.9.64 (172.25.9.64) 56(84) bytes of data. > ping: sendmsg: Operation not permitted > ping: sendmsg: Operation not permitted > > telnet 172.25.9.64 hangs up > > I am looking for correct route commands to make it working. Have you tried pptp client: http://pptpclient.sourceforge.net/ ? You can install it with yum. Paul -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
