Hi, I can not access the required IP behind the MS server. Seems that the VPN PPTP connection to MS PPTP server is OK as from the /var/log/messages, but I can not access the required IP behind the MS server. (But from Windows XP , I have no problems to connect to desired IP) Here are the details: 1. Before starting my netstat -r (1.1.1.0 is my local network) Destination Gateway Genmask Flags MSS Window irtt Iface 1.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 1.1.1.254 0.0.0.0 UG 0 0 0 eth0 After command: pppd call vpn1 I got the following messages in /var/log/messages Jul 22 14:21:14 razleefs pppd[2898]: pppd 2.4.4 started by root, uid 0 Jul 22 14:21:14 razleefs pppd[2898]: Using interface ppp0 Jul 22 14:21:14 razleefs pppd[2898]: Connect: ppp0 <--> /dev/pts/3 Jul 22 14:21:20 razleefs pptp[2900]: anon log[main:pptp.c:276]: The synchro pptp option is NOT activated Jul 22 14:21:22 razleefs pptp[2917]: anon warn[ctrlp_disp:pptp_ctrl.c:955]: zero Async Control Character Maps are not supported! Jul 22 14:21:22 razleefs pppd[2898]: CHAP authentication succeeded Jul 22 14:21:22 razleefs kernel: PPP MPPE Compression module registered Jul 22 14:21:22 razleefs pppd[2898]: MPPE 128-bit stateless compression ena Jul 22 14:21:23 razleefs pppd[2898]: local IP address 192.168.10.14 Jul 22 14:21:23 razleefs pppd[2898]: remote IP address 192.168.10.12 Jul 22 14:21:23 razleefs pppd[2898]: primary DNS address 192.168.10.1 Jul 22 14:21:23 razleefs pppd[2898]: secondary DNS address 192.168.0.5 I understand that it means that connection is ready. netstat -r is now: Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.10.12 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 1.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 1.1.1.254 0.0.0.0 UG 0 0 0 eth0 I need now to get connection to IP 172.25.9.64 behind the Windows VPN server. I understand that I can not do it without some route commands. I tried the suggested commands in vain: route add -net 192.168.10.0 netmask 255.255.255.0 dev ppp0 route add -net 172.25.9.0 netmask 255.255.255.0 dev ppp0 Now I tried ping 172.25.9.64 but it hanged up, and I got the message: ping 172.25.9.64 PING 172.25.9.64 (172.25.9.64) 56(84) bytes of data. ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted telnet 172.25.9.64 hangs up I am looking for correct route commands to make it working. Regards, Zvi -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
