d das wrote:
2008/6/27 Christof Haerens <christof.haerens@xxxxxx>:
Did you try setting MODE=Managed?
Do you see your router's ssid broadcast with the following command?
# iwlist wlan0 scan
Yes, I tried 'managed' mode too. Ok, I will try once again and send
you the output.
And this is the output of my 'iwlist wlan0 scan':
<<
[root@dia ~]# iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:08:5C:53:22:23
ESSID:"ddnet"
Mode:Master
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=80/100 Signal level:-54 dBm Noise level=-127 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:tsf=000000034423167c
--
das
ddts.randomink.org
In another message, you showed your ifcfg-wlan0 as using CHANNEL=3,
when your access point is using channel 11. Some drivers do not
like the "MODE=" bit (which is probably where the message is coming
from) and always use managed mode. Try commenting out the "MODE="
line by putting a "#" in it, and change the "CHANNEL=" to "CHANNEL=11".
Give that a try.
--
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer rps2@xxxxxxxx -
- Hosting Consulting, Inc. -
- -
- "Swap memory error: You lose your mind" -
----------------------------------------------------------------------
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
