>From: Gerhard Magnus <magnus@xxxxxxxxxxxxxxx> >Date: 2008/03/24 Mon PM 02:17:50 CDT >To: For users of Fedora <fedora-list@xxxxxxxxxx> >Subject: Re: NFS problem > >On Mon, 2008-03-24 at 13:49 -0500, Roger Heflin wrote: >> Gerhard Magnus wrote: >> > On Mon, 2008-03-24 at 12:55 -0500, Roger Heflin wrote: >> >> Gerhard Magnus wrote: >> >>> On Mon, 2008-03-24 at 10:38 -0600, Aaron Konstam wrote: >> >>>> No route to host sounds more like a connection problem. You can ssh between the machines? >> >>>> -- >> >>> ssh works fine. I've been googling this problem and found that other >> >>> people have had it and it may be a serious bug. Could it be that NFS >> >>> doesn't work in fedora and that everybody uses samba anyway? >> >>> >> >> Nope, NFS works fine in FC8, both the default kernel, and a number of the >> >> upgrade kernels, no one in their right mind uses SAMBA within a group of >> >> Linux/Unix machines, Samba is typically only used when exporting Linux/Unix disk >> >> to machines that don't have NFS support. >> >> >> >> "no route to host" *IS* a connection problem, run the commands "netstat -r" and >> >> "ifconfig -a" on both the server and client machine, and return the output. >> >> >> >> Roger >> >> >> > OK... Here's the server: >> > >> >> > >> > ...and the client: >> > >In trying to fix this, I've since run "service iptables stop" on both >boxes to shut down the firewalls. Then I was able to mount the shared >directory on the client without problems. I started iptables again and >can still see the shared directory on the client. > >> I don't see anything in either that stands out as wrong, both machines are >> plugged into the "LAN" ports of the router? >yes >> >> Try "arp -a" on both the client and server, and see what returns. >Here's the server: >magnusg@PuteF Mon Mar 24 12:04:28 >[270] ~ $ arp -a >PuteB.SMAssociates.com (192.168.1.13) at 00:13:20:8C:8D:D2 [ether] on >eth0 >...and the client: >magnusg@PuteB Mon Mar 24 12:11:05 >[583] /mnt/PuteF $ arp -a >PuteF.SMAssociates.com (192.168.1.14) at 00:16:76:C2:73:01 [ether] on >eth0 >? (192.168.1.1) at 00:06:25:09:6C:22 [ether] on eth0 > >> If the arp command does not show the other machine, try pinging the other >> machine and rerun the "arp -a". >"arp -a" on the server shows the client, while "arp -a" on the client >shows the server. > >> And can you both ping and ssh both directions? client -> server and server -> >> client? >yes, both ping and ssh work fine. Is there some other port I need to >open to get this to work? > Take a look at: http://linux.derkeiler.com/Mailing-Lists/Fedora/2008-01/msg00138.html ~~R -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
