Re: A sound problem one more time.- THE SOLUTION AT LAST (PLEASE NOTE)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 18 February 2008 20:28, Mark C. Allman wrote:
> On Mon, 2008-02-18 at 19:54 +0100, Nigel Henry wrote:
> > On Monday 18 February 2008 14:53, Mark C. Allman wrote:
> > > On Sun, 2008-02-17 at 19:01 +0100, Nigel Henry wrote:
> > > > On Friday 15 February 2008 20:32, Mark C. Allman wrote:
> > > > > On Fri, 2008-02-15 at 20:09 +0100, Nigel Henry wrote:
> > > > > > On Friday 15 February 2008 02:35, Mark C. Allman wrote:
> > > > > > > On Thu, 2008-02-14 at 22:13 +0100, Nigel Henry wrote:
> > > > > > > > On Thursday 14 February 2008 18:01, Mark C. Allman wrote:
> > > > > > > > > On Wed, 2008-02-13 at 22:43 +0100, Nigel Henry wrote:
> > > > > > > > > > On Wednesday 13 February 2008 21:34, Frank Chiulli wrote:
> > > > > > > > > > > Nigel,
> > > > > > > > > > > I have a Sound Blaster Live! Value.  This is an older
> > > > > > > > > > > machine. F8 detected the card automatically. 
> > > > > > > > > > > Unfortunately I can't tell you exactly when I got the
> > > > > > > > > > > error.  I had tried lots of things to get sound to work
> > > > > > > > > > > but never did.  It wasn't a big deal. Then I was
> > > > > > > > > > > looking at something else when I was the error.  I
> > > > > > > > > > > figured that I would take a look at it.  It seems like
> > > > > > > > > > > an easy fix.  It seems pretty obvious to me what was
> > > > > > > > > > > wrong.  So I corrected it.  Then sound worked.
> > > > > > > > > > >
> > > > > > > > > > > Frank
> > > > > > > > > >
> > > > > > > > > > Thanks for the reply Frank. I was hoping that you would
> > > > > > > > > > say that your card was also an isa one, and would tie it
> > > > > > > > > > in with Aarons problems.
> > > > > > > > > >
> > > > > > > > > > It's nice to see that both of you have resolved the
> > > > > > > > > > problem, but what's going on to cause these problems is
> > > > > > > > > > beyond me.
> > > > > > > > > >
> > > > > > > > > > As you see from what I posted above, my audigy2
> > > > > > > > > > soundblaster was detected ok, and apart from disabling
> > > > > > > > > > pulseaudio by removing alsa-plugins-pulseaudio, and
> > > > > > > > > > adding the usual lines to /etc/modprobe.conf for my usb
> > > > > > > > > > midi keyboard that uses snd-usb-audio, the sounds are
> > > > > > > > > > working ok.
> > > > > > > > > >
> > > > > > > > > > Anyway, the fact that both you and Aaron now have sounds
> > > > > > > > > > is the main thing. Quite why you've both had problems,
> > > > > > > > > > and me none, I've no idea. That's computers for you.
> > > > > > > > > >
> > > > > > > > > > Nigel.
> > > > > > > >
> > > > > > > > Mark says:
> > > > > > > > > When I run the "alsa-info.sh" script I see an error message
> > > > > > > > > when it tries to collect the data that says something like
> > > > > > > > > "no soundcard found." I think it's the same error that I
> > > > > > > > > see when I run aplay to list out cards:
> > > > > > > > >     [mcallman@prez tmp]$ aplay -l
> > > > > > > > >     aplay: device_list:205: no soundcards found...
> > > > > > > > >
> > > > > > > > > Also, when I look at the script results, I see the
> > > > > > > > > following at about line 65 (this is after I tried
> > > > > > > > > "model=toshiba" in modprobe.conf even though my laptop is a
> > > > > > > > > Dell XPS 1710): Loaded sound module option
> > > > > > > > >     --------------------------
> > > > > > > > >     Module: snd_hda_intel
> > > > > > > > >     enable : N
> > > > > > > > >     id : <NULL>
> > > > > > > > >     index : 0
> > > > > > > > >     model : toshiba
> > > > > > > > >     position_fix : 0
> > > > > > > > >     power_save : 0
> > > > > > > > >     power_save_controller : Y
> > > > > > > > >     probe_mask : -1
> > > > > > > > >     single_cmd : N
> > > > > > > > >
> > > > > > > > > Could the "enable: N" line be the key here?  For those of
> > > > > > > > > you that have sound working, what do you see listed for
> > > > > > > > > "enable?"
> > > > > > > > >
> > > > > > > > > If it helps, you can look at all the test results that the
> > > > > > > > > script uploaded at:
> > > > > > > > >     http://pastebin.ca/903970
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > -- Mark C. Allman, PMP
> > > > > > > >
> > > > > > > > Hi Mark. I've sort of lost the plot a bit, but do you have
> > > > > > > > your sound working now?
> > > > > > > >
> > > > > > > > I ask because the Alsa development folks are working hard on
> > > > > > > > resolving problems, particularly with the hda intel cards.
> > > > > > > > Alsa driver 1.0.16 has just been released, and I see many
> > > > > > > > patches being applied to the hda intel codecs, including your
> > > > > > > > STAC9200 one.
> > > > > > > >
> > > > > > > > Nigel.
> > > > > > >
> > > > > > > Sound works using:
> > > > > > >     Pidgin
> > > > > > >     VLC (playing Rush/Tom Sawyer right now)
> > > > > > >     RealAudio
> > > > > > >
> > > > > > > It does not work for:
> > > > > > >     gnome-cd (won't start a track)
> > > > > > >     grip (starts reading tracks, but no sound)
> > > > > > >     aplay/arecord ("no soundcard found")
> > > > > > >     Flash in Firefox
> > > > > > >     system-config-soundcard (everything's there--just no
> > > > > > > sound!!)
> > > > > > >
> > > > > > > I can pipe a ".au" file (if I remember the extension correctly)
> > > > > > > to /dev/audio and I hear it.
> > > > > > >
> > > > > > > Some "/proc/asound" stuff:
> > > > > > >     [mcallman@prez X11]$ ls /proc/asound/
> > > > > > >     card0 cards devices hwdep Intel modules oss pcm seq timers
> > > > > > > version [mcallman@prez X11]$ cat /proc/asound/cards
> > > > > > >      0 [Intel          ]: HDA-Intel - HDA Intel
> > > > > > >                           HDA Intel at 0xdfffc000 irq 21
> > > > > > >     [mcallman@prez X11]$ ls /proc/asound/card0
> > > > > > >     codec#0  codec#1  id  oss_mixer  pcm0c  pcm0p  pcm1p
> > > > > > >     [mcallman@prez X11]$ cat /proc/asound/pcm
> > > > > > >     00-01: STAC92xx Digital : STAC92xx Digital : playback 1
> > > > > > >     00-00: STAC92xx Analog : STAC92xx Analog : playback 1 :
> > > > > > > capture 1 [mcallman@prez X11]$ cat /proc/asound/modules
> > > > > > >     0 snd_hda_intel
> > > > > > >     [mcallman@prez X11]$ cat /proc/asound/devices
> > > > > > >       2:        : timer
> > > > > > >       3:        : sequencer
> > > > > > >       4: [ 0- 1]: digital audio playback
> > > > > > >       5: [ 0- 0]: digital audio playback
> > > > > > >       6: [ 0- 0]: digital audio capture
> > > > > > >       7: [ 0- 1]: hardware dependent
> > > > > > >       8: [ 0- 0]: hardware dependent
> > > > > > >       9: [ 0]   : control
> > > > > > >     [mcallman@prez X11]$ ls -ld /proc/asound/Intel
> > > > > > >     lrwxrwxrwx 1 root root 5 2008-02-14 20:18
> > > > > > > /proc/asound/Intel -> card0
> > > > > > >
> > > > > > > Any suggestions would be welcome.  If any of the Alsa
> > > > > > > development folks would like a test bed to try out ideas just
> > > > > > > let me know.
> > > > > > >
> > > > > > > -- Mark C. Allman
> > > > > >
> > > > > > Hi Mark. I know I've got pulseaudio on the brain, as I had
> > > > > > problems with it, and disabled it, but have you got the default
> > > > > > install of F8, where pulseaudio is enabled? I ask because of the
> > > > > > sound apps that you have working. Realplayer uses OSS, VLC uses
> > > > > > natively OSS, or Alsa, and also Gnomes ESD. Not sure about Pidgin
> > > > > > (Gaim), but I believe it uses OSS for it's sounds. Puzzling why
> > > > > > Alsa apps won't work.
> > > > > >
> > > > > > If you havn't messed with pulseaudio since installing F8, I think
> > > > > > I'd do a: yum remove alsa-plugins-pulseaudio
> > > > > >
> > > > > > having done that I'd see if now aplay, audio cd's, etc work.
> > > > > >
> > > > > > Enough for now.
> > > > > >
> > > > > > Nigel.
> > > > >
> > > > > The only PulseAudio package I have installed is
> > > > > pulseaudio-libs-0.9.8-5.fc8.  It's needed for
> > > > > libflashsupport-000-0.1.svn20070904.
> > > >
> > > > Hi Marc. Sorry for the delay in replying. I spent a while today going
> > > > back through the alsa-devel archives, and the only reference to the
> > > > Dell XPS 1710, was one for the Dell XPS M1710w (which may well be the
> > > > same machine), and was to do with a problem with the subwoofer not
> > > > working with the alsa 1.0.14 driver, and on a Suse install. See below
> > > > for the thread.
> > > > http://mailman.alsa-project.org/pipermail/alsa-devel/2007-August/subj
> > > >ect. html
> > > >
> > > > I'll contact the guy directly, after you've replied to this post, to
> > > > see if he had any problems with getting sound working on his machine.
> > > > I'd like to clarify some things with you first though.
> >
> > <Snip>
> >
> > > > > -- Mark C. Allman
> > > >
> > > > Over to you, and all the best.
> > > >
> > > > Nigel.
> > >
> > > For pulseaudio:
> > >     The only PulseAudio package I have installed is
> > >     pulseaudio-libs-0.9.8-5.fc8.
> > >
> > > For option values in modprobe:  I tried all ("all") the dell values.
> > > Someone earlier said they used "toshiba" even though their laptop
> > > wasn't a Toshiba, so I thought I'd try it.  No luck, of course.
> > >
> > > alsamixer:
> > >     [mcallman@prez tmp]$ alsamixer
> > >
> > >     alsamixer: function snd_ctl_open failed for default: No such
> > >     file or directory
> > > -- Mark C. Allman
> >
> > Hi Mark. I had a reply back from the guy on the alsa-devel list, that has
> > the same machine as you. He's using Suse, not F8, but had no problems
> > getting sound working. See below for his reply.
> >
> > <quote>
> > I'm not aware of any initial problem I might have had. However I
> > regularly install drivers from the hg tree so I'm not too sure about
> > actual versions.
> >
> > However at the time I posted about my subwoofer problem I did have sound
> > and wasn't even aware there might be problems (apart from the sound being
> > somewhat "slim", i.e. missing deep frequencies). On the other hand I
> > usually use headphones and thus don't recognize that.
> >
> > Anyway, after applying the patches you refer to above also my building
> > subwoofer works as adverticed and I do have another slider when invoking
> > alsamixer. So I'd say with alsa 1.0.1[456] it should work.
> >
> > So to sum it up:
> > I have no problems with sound on my XPS M1710 whatsoever.
> >
> > Feel free to ask more questions and/or compare configurations.
> >
> > Best,
> > Michael
> > <end quote>
> >
> > I'm still concerned about pulseaudio, and I'm not trying to start an
> > argument. The fact that that alsamixer is not available appears to
> > indicate that pulseaudio is still involved in some way or other. You have
> > said that you only have pulseaudio-libs installed, but the package that
> > disables pulseaudio is named "alsa-plugins-pulseaudio". Could you please
> > verify that the package named "alsa-plugins-pulseaudio"  is not
> > installed. We're just trying to help here, and to get your sound working.
> >
> > As I've said before, running, rpm -q alsa-plugins-pulseaudio, will show
> > if the package is installed, or Yumex will will also show if it's
> > installed, or if you use apt, and synaptic, synaptic will show if the
> > package is installed.
> >
> > Sorry. I'm not trying to wind you up, but just trying to find out if
> > pulseaudio is enabled. It's causing a lot of problems for some folks, and
> > disabling it just gets the sounds back.
> >
> > Nigel.
>
> [mcallman@prez tmp]$ rpm -q -a | grep ulse
> pulseaudio-libs-0.9.8-5.fc8
>
> [mcallman@prez tmp]$ rpm -q -a | grep audio
> gnome-audio-2.0.0-4
> portaudio-19-3.fc8
> audiofile-devel-0.2.6-7.fc8
> jack-audio-connection-kit-0.103.0-5.fc8
> pulseaudio-libs-0.9.8-5.fc8
> audiofile-0.2.6-7.fc8
>
> [mcallman@prez tmp]$ cat /etc/asound.conf
> pcm.!default {
>     type hw
>     card 0
> }
>
> ctl.!default {
>     type hw
>     card 0
> }
>
> pcm.Intel {
>      type hw
>      card 0
> }
>
> ctl.Intel {
>      type hw
>      card 0
> }
>
> [mcallman@prez tmp]$ amixer
> amixer: Mixer attach default error: No such file or directory
>
> Is there detailed documentation in an Alsa source that defines what all
> goes into asound.conf?  As I've said all along, I'm just looking for
> ideas on what to dig into to diagnose and fix this.  I'm not expecting
> you all on the list to do the work!
>
> -- Mark C. Allman

Hi Mark. All I've been asking for is a verification that 
alsa-plugins-pulseaudio is installed. This is the package that can cause 
problems with the sound working. As of yet you have not verified that the 
alsa-plugins-pulseaudio package is either installed, or not installed.

This should be not to difficult. Yumex should show if the package is 
installed, or just run rpm -q alsa-plugins-pulseaudio, and post back the 
output.

Just a confirmation that alsa-plugins-pulseaudio is installed, or not 
installed will be enough to progress further on with the problem.

Nigel.

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux