2008/1/25 Mikkel L. Ellertson <mikkel@xxxxxxxxxxxxxxxx>:
> Todd Denniston wrote:
> >
> > <about to get in just over my ears>
> > not sure if you need to be working with
> > /boot/grub/device.map
> > I would suggest trying the grub.conf changes first.
> > If you do, then grub-install has a --recheck among it's options. You
> > might want to make a backup of the current map first though.
> >
> > if/when Mikkel comes back, you can probably trust him more than me.
> >
> Good advice. Grub-install seems to pay attention to the device.map
> file when doing the install. At least I have had to edit it to match
> what Grub will see when booting when I install to a USB drive I plan
> to boot off of using the BIOS boot from USB device option. Today
> turned out to be a busy day, so I was not able to get back before
> now. (Problems with a DSL setup when they changed to a static IP -
> everything had to be reconfigured on the customer's instead of the
> ISP changing the DHCP configuration. They forgot to write down some
> of the information they were given, like the name servers and
> gateway IP addresses.)
>
>
> Mikkel
OK....the root partition for Fedora *used* to be /dev/sda2 and now is
/dev/sdb2. This is seen here:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xfdb8211d
Device Boot Start End Blocks Id System
/dev/sda1 * 1 60801 488384001 a5 FreeBSD
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf18da1dc
Device Boot Start End Blocks Id System
/dev/sdb1 1 10199 81923436 7 HPFS/NTFS
/dev/sdb2 * 10200 12749 20482875 83 Linux
/dev/sdb3 12750 15299 20482875 83 Linux
/dev/sdb4 15300 60801 365494815 83 Linux
Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0007a82a
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 2611 20972826 83 Linux
/dev/sdc2 2612 2873 2104515 82 Linux swap / Solaris
/dev/sdc3 2874 3004 1052257+ 83 Linux
/dev/sdc4 3005 60801 464254402+ 8e Linux LVM
I have changed /etc/grub.conf manually to be:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,1)
# kernel /boot/vmlinuz-version ro root=/dev/sda2
# initrd /boot/initrd-version.img
#boot=/dev/sda2
default=2
timeout=5
splashimage=(hd1,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.23.14-107.fc8)
root (hd1,1)
kernel /boot/vmlinuz-2.6.23.14-107.fc8 ro root=LABEL=/ rhgb quiet
initrd /boot/initrd-2.6.23.14-107.fc8.img
title Fedora (2.6.23.9-85.fc8)
root (hd1,1)
kernel /boot/vmlinuz-2.6.23.9-85.fc8 ro root=LABEL=/ rhgb quiet
initrd /boot/initrd-2.6.23.9-85.fc8.img
title Fedora (2.6.21-2952.fc8xen)
root (hd1,1)
kernel /boot/xen.gz-2.6.21-2952.fc8
module /boot/vmlinuz-2.6.21-2952.fc8xen ro root=LABEL=/ rhgb quiet
module /boot/initrd-2.6.21-2952.fc8xen.img
title Fedora (2.6.21-2950.fc8xen)
root (hd1,1)
kernel /boot/xen.gz-2.6.21-2950.fc8
module /boot/vmlinuz-2.6.21-2950.fc8xen ro root=LABEL=/ rhgb quiet
module /boot/initrd-2.6.21-2950.fc8xen.img
Where all (hd0,1) were changed to (hd1,1).
What else needs to be done?
Thanks.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
