Thanks for the info but the setup works with windows. Akhil On Sun, 2007-12-16 at 18:59 -0600, Robert wrote: > Akhil Kapoor wrote: > > Hi, I am having problem trying to set up scanner canon N650U with FC7. > > > > I have tried these so far. > > [root@kslserver rules.d]# lsusb > > Bus 002 Device 001: ID 0000:0000 > > Bus 001 Device 003: ID 04a9:2206 Canon, Inc. CanoScan N650U/N656U > > Bus 001 Device 001: ID 0000:0000 > > > > sane-find-scanner -q > > found USB scanner (vendor=0x04a9 [Canon], product=0x2206 [CanoScan], > > chip=LM983x?) at libusb:001:003 > > > > crw-r--r-- 1 root root 252, 0 2007-11-29 13:20 /dev/usbdev1.1_ep00 > > crw-r--r-- 1 root root 252, 1 2007-11-29 13:20 /dev/usbdev1.1_ep81 > > crw-r--r-- 1 root root 252, 4 2007-11-29 16:47 /dev/usbdev1.3_ep00 > > crw-r--r-- 1 root root 252, 7 2007-11-29 20:48 /dev/usbdev1.3_ep03 > > crw-r--r-- 1 root root 252, 5 2007-11-29 20:48 /dev/usbdev1.3_ep81 > > crw-r--r-- 1 root root 252, 6 2007-11-29 20:48 /dev/usbdev1.3_ep82 > > crw-r--r-- 1 root root 252, 2 2007-11-29 13:20 /dev/usbdev2.1_ep00 > > crw-r--r-- 1 root root 252, 3 2007-11-29 13:20 /dev/usbdev2.1_ep81 > > crw------- 1 root root 253, 0 2007-11-29 13:20 /dev/usbmon0 > > crw------- 1 root root 253, 1 2007-11-29 13:20 /dev/usbmon1 > > crw------- 1 root root 253, 2 2007-11-29 13:20 /dev/usbmon2 > > > > > > scanimage -L > > > > No scanners were identified. If you were expecting something different, > > check that the scanner is plugged in, turned on and detected by the > > sane-find-scanner tool (if appropriate). Please read the documentation > > which came with this software (README, FAQ, manpages). > > > > cat /etc/udev/rules.d/60-libsane.rules | grep N650U > > # Canon CanoScan N650U/N656U > > # Canon CanoScan N650U/N656U > > > > > > The scanner is defined in plustek. but can not see > > device /dev/usbacanner > > > > > > > > Please can some one guide me as to what to do next to get it working. > > > > Thanks. > > > > > > Akhil Kapoor > > > > > > > > No takers after after 3 days, so I'll offer this (probably useless) > experience: > I was getting grief from a little Canon lIDE 35 because the computer m/b > apparently didn't supply enough current to power it. Solution was to > buy a POWERED USB hub to plug it into. It now works like a champ. > I had the advantage of having 2 computers with identical kernels. One > worked, one didn't. For the record, the failing m/b was an ASUS a7n8x > deluxe ver 2. > -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
