Hi, I am having problem trying to set up scanner canon N650U with FC7. I have tried these so far. [root@kslserver rules.d]# lsusb Bus 002 Device 001: ID 0000:0000 Bus 001 Device 003: ID 04a9:2206 Canon, Inc. CanoScan N650U/N656U Bus 001 Device 001: ID 0000:0000 sane-find-scanner -q found USB scanner (vendor=0x04a9 [Canon], product=0x2206 [CanoScan], chip=LM983x?) at libusb:001:003 crw-r--r-- 1 root root 252, 0 2007-11-29 13:20 /dev/usbdev1.1_ep00 crw-r--r-- 1 root root 252, 1 2007-11-29 13:20 /dev/usbdev1.1_ep81 crw-r--r-- 1 root root 252, 4 2007-11-29 16:47 /dev/usbdev1.3_ep00 crw-r--r-- 1 root root 252, 7 2007-11-29 20:48 /dev/usbdev1.3_ep03 crw-r--r-- 1 root root 252, 5 2007-11-29 20:48 /dev/usbdev1.3_ep81 crw-r--r-- 1 root root 252, 6 2007-11-29 20:48 /dev/usbdev1.3_ep82 crw-r--r-- 1 root root 252, 2 2007-11-29 13:20 /dev/usbdev2.1_ep00 crw-r--r-- 1 root root 252, 3 2007-11-29 13:20 /dev/usbdev2.1_ep81 crw------- 1 root root 253, 0 2007-11-29 13:20 /dev/usbmon0 crw------- 1 root root 253, 1 2007-11-29 13:20 /dev/usbmon1 crw------- 1 root root 253, 2 2007-11-29 13:20 /dev/usbmon2 scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). cat /etc/udev/rules.d/60-libsane.rules | grep N650U # Canon CanoScan N650U/N656U # Canon CanoScan N650U/N656U The scanner is defined in plustek. but can not see device /dev/usbacanner Please can some one guide me as to what to do next to get it working. Thanks. Akhil Kapoor -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
