bruce wrote: > craig... > > if you look at the diagram again.. box2 has ath0 which is on the 192.168.1 > sub (it's 1.5). box2/eth0 is on a different sub, because as i understand it, > you can't have multiple nics on the same box, on the same subnet.... > You can - you can have 2 or more interfaces that have the same IP address using bridging. > the issue is what has to be setup on box2 regarding iptables/route cmds to > allow this to all work. > > thanks > No matter what you do to the Linux box, other machines on the 192.168.1.0/24 network are not going to know that the Linux box is the gateway to the 192.168.2.0/24 network unless you tell them. So when you try to ping 192.168.2.5, the packet is sent to the D-link router, because that is the default route, and the machines only know the route for the 192.168.1.0/24 network, and the default route. As I posted in another message, you may be able to add a route to the D-link router so it know to use the Linux box as the route to the 192.168.2.0/24 network. If not, then you have to add the route to the other machines on the 192.168.1.0/24 network. Mikkel -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting a bad thing?
Attachment:
signature.asc
Description: OpenPGP digital signature
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
